RANSOM INTERNATIONAL GRIP INSERTS Do not use hard grip inserts or 3D-printed plastic grip inserts for your Master Series Ransom Rest. Hard inserts damage the gun by generating destructive recoil energy that travels through the frame and barrel. Not only that, most hard or 3D-printed inserts are poorly engineered and fail to replicate human-like recoil, rendering any test data invalid. Hard grip inserts will not provide repeatable test results to your hand and the end user of the firearm. The grip inserts are specifically designed to match the durometer of the human hand. The inserts absorb the first few milliseconds of shot before the machine can even mechanically recoil. Look at the photo attached here: You can see the bullet has left the barrel. The machine has not come out of a lowered battery position, and the slide has not come out of lockup. The first few milliseconds of vibration and recoil are absorbed by the insert before the machine can even respond. Why will a hard insert damage your gun? The simplest, most direct answer is that physics teaches us that every action has an equal and opposite reaction. Therefore, Chuck Ransom always said vibration and recoil cannot be stopped; they can only be repeatedly controlled. If these forces do not have somewhere to travel, they will find a way to go. Just as lightning and water will find a way to travel and move, so will vibration and recoil. The inserts are specifically designed to act like the human hand, absorbing these forces and not transferring them into the gun. The Ransom rest insert absorbs vibration and harmonics, then properly transfers the energy into the rest to recoil as a human does coaxially. This whole unit functions similarly to how your hand absorbs the recoil and vibration. The grip inserts and machine, as a pair, are specifically designed to absorb this. This damage may not be seen right away, but it accrues with each shot. A hard insert will decrease the life of the barrel and gun, and it may possibly cause injury or death if something occurs. A hard insert will not be duplicatable to the end user. Whether destructive testing or accuracy testing, you must mimic the human, or your test is flawed. If a hard or 3d printed insert worked. Then every gun manufacturer would already be using them, and there would be no need for a Ransom Rest company. Take note and caution, many have tried, and many have found out the hard way. Caution: Don’t use hard or 3D-printed inserts.
Die perfekten Grip Inserts für deine Glock Gen 3!
Die RANSOM INTERNATIONAL GRIP INSERTS sind speziell für die Verwendung mit deinem Master Series Ransom Rest konzipiert. Vermeide die Nutzung von harten Grip Inserts oder 3D-gedruckten Kunststoff-Inserts, da diese deinem Gewehr schaden können.
Warum RANSOM Grip Inserts?
Harte Inserts erzeugen zerstörerische Rückstoßenergie, die durch den Rahmen und den Lauf des Gewehrs übertragen wird. Viele dieser harten oder 3D-gedruckten Inserts sind schlecht konstruiert und können den menschlichen Rückstoß nicht nachahmen, was die Testergebnisse ungültig macht.
- Die Grip Inserts sind so gestaltet, dass sie der Durometer-Härte der menschlichen Hand entsprechen.
- Sie absorbieren die ersten Millisekunden des Schusses, bevor die Maschine überhaupt mechanisch zurückschlagen kann.
- Die Inserts wirken wie die menschliche Hand und verhindern, dass die Rückstoßkräfte ins Gewehr übertragen werden.
Wie funktionieren sie?
Die Ransom Rest Inserts absorbieren Vibrationen und Harmonien und übertragen die Energie korrekt in das Restgerät, sodass der Rückstoß wie bei einem Menschen koaxial erfolgt. Diese Einheit funktioniert ähnlich wie deine Hand, die den Rückstoß und die Vibrationen absorbiert.
Wichtige Hinweise
Die Schäden durch harte Inserts sind möglicherweise nicht sofort sichtbar, sammeln sich jedoch mit jedem Schuss an. Ein hartes Insert kann die Lebensdauer des Laufs und des Gewehrs verringern und möglicherweise Verletzungen oder sogar den Tod verursachen, wenn etwas schiefgeht.
Denke daran: Wenn ein hartes oder 3D-gedrucktes Insert funktionieren würde, würden alle Waffenhersteller diese bereits verwenden. Viele haben es versucht und viele haben auf die harte Tour gelernt. Sei vorsichtig: Verwende keine harten oder 3D-gedruckten Inserts!