RANSOM INTERNATIONAL GRIP INSERTS Do not use hard grip inserts or 3D-printed plastic grip inserts for your Master Series Ransom Rest. Hard inserts damage the gun by generating destructive recoil energy that travels through the frame and barrel. Not only that, most hard or 3D-printed inserts are poorly engineered and fail to replicate human-like recoil, rendering any test data invalid. Hard grip inserts will not provide repeatable test results to your hand and the end user of the firearm. The grip inserts are specifically designed to match the durometer of the human hand. The inserts absorb the first few milliseconds of shot before the machine can even mechanically recoil. Look at the photo attached here: You can see the bullet has left the barrel. The machine has not come out of a lowered battery position, and the slide has not come out of lockup. The first few milliseconds of vibration and recoil are absorbed by the insert before the machine can even respond. Why will a hard insert damage your gun? The simplest, most direct answer is that physics teaches us that every action has an equal and opposite reaction. Therefore, Chuck Ransom always said vibration and recoil cannot be stopped; they can only be repeatedly controlled. If these forces do not have somewhere to travel, they will find a way to go. Just as lightning and water will find a way to travel and move, so will vibration and recoil. The inserts are specifically designed to act like the human hand, absorbing these forces and not transferring them into the gun. The Ransom rest insert absorbs vibration and harmonics, then properly transfers the energy into the rest to recoil as a human does coaxially. This whole unit functions similarly to how your hand absorbs the recoil and vibration. The grip inserts and machine, as a pair, are specifically designed to absorb this. This damage may not be seen right away, but it accrues with each shot. A hard insert will decrease the life of the barrel and gun, and it may possibly cause injury or death if something occurs. A hard insert will not be duplicatable to the end user. Whether destructive testing or accuracy testing, you must mimic the human, or your test is flawed. If a hard or 3d printed insert worked. Then every gun manufacturer would already be using them, and there would be no need for a Ransom Rest company. Take note and caution, many have tried, and many have found out the hard way. Caution: Don’t use hard or 3D-printed inserts.
Kurz und bündig: Die besten Grip Inserts für deine FN 509 Full Size!
Die RANSOM INTERNATIONAL GRIP INSERTS sind speziell für die Master Series Ransom Rest entwickelt worden. Du solltest auf keinen Fall harte Grip Inserts oder 3D-gedruckte Kunststoff-Grip Inserts verwenden, da diese deinem Gewehr schaden können.
Warum sind harte Inserts problematisch?
Harte Inserts erzeugen zerstörerische Rückstoßenergie, die durch den Rahmen und den Lauf des Gewehrs übertragen wird. Die meisten harten oder 3D-gedruckten Inserts sind schlecht konstruiert und können den menschlichen Rückstoß nicht realistisch nachahmen, wodurch alle Testergebnisse ungültig werden. Diese Inserts bieten keine wiederholbaren Testergebnisse für deine Hand und den Endbenutzer des Gewehrs.
Die Lösung: Ransom Grip Inserts
Unsere Grip Inserts sind so konzipiert, dass sie dem Durometer der menschlichen Hand entsprechen. Sie absorbieren die ersten Millisekunden des Schusses, bevor die Maschine überhaupt mechanisch zurückschlagen kann. Schau dir das angehängte Foto an: Du kannst sehen, dass die Kugel den Lauf verlassen hat, die Maschine aber noch nicht aus der gesenkten Position herausgekommen ist und der Verschluss nicht entriegelt ist.
Wie funktionieren die Inserts?
- Die ersten Millisekunden der Vibration und des Rückstoßes werden von dem Insert absorbiert.
- Die Inserts wirken wie die menschliche Hand und übertragen diese Kräfte nicht auf das Gewehr.
- Der Ransom Rest Insert absorbiert Vibrationen und Harmonien und überträgt die Energie korrekt in die Restposition, sodass der Rückstoß koaxial wie bei einem Menschen erfolgt.
Langzeitfolgen harter Inserts
Der Schaden durch harte Inserts ist nicht sofort sichtbar, aber er akkumuliert sich mit jedem Schuss. Ein hartes Insert kann die Lebensdauer des Laufs und des Gewehrs verringern und möglicherweise Verletzungen oder sogar den Tod verursachen, wenn etwas schiefgeht. Ein hartes Insert ist für den Endbenutzer nicht reproduzierbar.
Fazit
Egal, ob du destruktive Tests oder Genauigkeitstests durchführst, du musst den Menschen nachahmen, oder dein Test ist fehlerhaft. Wenn harte oder 3D-gedruckte Inserts funktionieren würden, würden sie bereits von jedem Gewehrhersteller verwendet werden, und es bräuchte kein Ransom Rest Unternehmen. Sei vorsichtig und achte darauf: Viele haben es versucht und viele haben auf die harte Tour gelernt. Warnung: Verwende keine harten oder 3D-gedruckten Inserts!