Installs Easily; Choose Your Sling Position On Collapsible Stocks; Made In The U.S.A.
No gunsmithing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buffer tube. Includes 1¼", mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 aluminum body with a matte black finish is built to take extreme duty use without failure. Won t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release feature to any single-point, two-point, or three-point tactical sling. Made in the USA.
SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.
Mehr...
Einfache Installation; Wähle die Position des Riemens auf einstellbaren Schaftrohren; Hergestellt in den U.S.A.
Keine Büchsenmacherarbeiten erforderlich, extra robuste, beidseitige Riemenbügelhalterung wird einfach auf das Pufferrohr geklemmt. Enthält einen 1¼", mil-spec., Druckknopf, schnell abnehmbaren Riemenbügel, der entweder seitlich oder in der Mitte des Adapters montiert werden kann. Passt auf verstellbare M4-Typ-Schulterstützen. Hart anodisiertes, 6061 Aluminiumgehäuse mit matter schwarzer Oberfläche ist gebaut, um extremen Einsatz ohne Versagen zu widerstehen. Stört nicht den Betrieb der Schulterstütze. Eine ausgezeichnete Wahl, um jeder einpunktigen, zweipunktigen oder dreipunktigen taktischen Schlinge eine einfache Schnelllösefunktion hinzuzufügen. Hergestellt in den USA.
SPECS: 6061 Aluminium, hart anodisiert, matt schwarz. Passt auf 4- oder 6-Positionen einstellbare Schaftrohre. Keine Büchsenmacherarbeiten erforderlich.
Mehr...
Kundenbewertungen zu MIDWEST INDUSTRIES, INC. MCTAR-30HD Sling Adapter
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3,8
Definitely buy again.(24.01.2010)
Easy install and heavy duty. Used hunting and target shooting.
A good sling holder(12.04.2011)
I like that the sling adapter came with extra screws. The screws are small and easily lost so by adding twice as many as needed, MI was thinking about the customster. THe sling adapter did not fit flush with my M-4 but it's very close and secure. If it was flush I would have given 5 stars. I am proud of this purchase and will not need a new adapter
A great product but...(17.07.2011)
This is a simple and good quality product, but is obviously designed for a different stock/buffer tube than mine. The locator pin lug is too long to but into the stock nut, I will cut off the 1/2" lug so it is flush fitting. It is also 2/100 of an inch oversize for the buffer tube, but there is a ridge. which I will grind off to fit. I can't help but think that this has been designed back to front. On the positive is the three point quick attachment points for the swivel.
Adapter has to be milled down to fit!(21.02.2014)
I had to mill off 1/8 inch from the lug that protrudes out at the bottom. Also had to mill more out of the slot where buffer tube is, to make this thing fit the Colt LE6920MP-B. AFTER all the milling it now fits excellent.
Artikel-Nr.: 100002876 MIDWEST INDUSTRIES, INC. MCTAR-30HD Sling Adapter Herstellerproduktnummer: MCTAR30HD816537010319 Keine Büchsenmacherarbeiten erforderlich, extra robuste, beidseitige Riemenbügelhalterung wird einfach auf das Pufferrohr geklemmt. Enthält einen 1¼", mil-spec., Druckknopf, schnell abnehmbaren Riemenbügel, der entweder seitlich oder in der Mitte des Adapters montiert werden kann. Passt auf verstellbare M4-Typ-Schulterstützen. Hart anodisiertes, 6061 Aluminiumgehäuse mit matter schwarzer Oberfläche ist gebaut, um extremen Einsatz ohne Versagen zu widerstehen. Stört nicht den Betrieb der Schulterstütze. Eine ausgezeichnete Wahl, um jeder einpunktigen, zweipunktigen oder dreipunktigen taktischen Schlinge eine einfache Schnelllösefunktion hinzuzufügen. Hergestellt in den USA.
Installs Easily; Choose Your Sling Position On Collapsible Stocks; Made In The U.S.A.
No gunsmithing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buffer tube. Includes 1¼", mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 aluminum body with a matte black finish is built to take extreme duty use without failure. Won t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release feature to any single-point, two-point, or three-point tactical sling. Made in the USA.
SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.
Mehr...
Einfache Installation; Wähle die Position des Riemens auf einstellbaren Schaftrohren; Hergestellt in den U.S.A.
Keine Büchsenmacherarbeiten erforderlich, extra robuste, beidseitige Riemenbügelhalterung wird einfach auf das Pufferrohr geklemmt. Enthält einen 1¼", mil-spec., Druckknopf, schnell abnehmbaren Riemenbügel, der entweder seitlich oder in der Mitte des Adapters montiert werden kann. Passt auf verstellbare M4-Typ-Schulterstützen. Hart anodisiertes, 6061 Aluminiumgehäuse mit matter schwarzer Oberfläche ist gebaut, um extremen Einsatz ohne Versagen zu widerstehen. Stört nicht den Betrieb der Schulterstütze. Eine ausgezeichnete Wahl, um jeder einpunktigen, zweipunktigen oder dreipunktigen taktischen Schlinge eine einfache Schnelllösefunktion hinzuzufügen. Hergestellt in den USA.
SPECS: 6061 Aluminium, hart anodisiert, matt schwarz. Passt auf 4- oder 6-Positionen einstellbare Schaftrohre. Keine Büchsenmacherarbeiten erforderlich.
Mehr...
Kundenbewertungen zu MIDWEST INDUSTRIES, INC. MCTAR-30HD Sling Adapter
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3,8
Definitely buy again.(24.01.2010)
Easy install and heavy duty. Used hunting and target shooting.
A good sling holder(12.04.2011)
I like that the sling adapter came with extra screws. The screws are small and easily lost so by adding twice as many as needed, MI was thinking about the customster. THe sling adapter did not fit flush with my M-4 but it's very close and secure. If it was flush I would have given 5 stars. I am proud of this purchase and will not need a new adapter
A great product but...(17.07.2011)
This is a simple and good quality product, but is obviously designed for a different stock/buffer tube than mine. The locator pin lug is too long to but into the stock nut, I will cut off the 1/2" lug so it is flush fitting. It is also 2/100 of an inch oversize for the buffer tube, but there is a ridge. which I will grind off to fit. I can't help but think that this has been designed back to front. On the positive is the three point quick attachment points for the swivel.
Adapter has to be milled down to fit!(21.02.2014)
I had to mill off 1/8 inch from the lug that protrudes out at the bottom. Also had to mill more out of the slot where buffer tube is, to make this thing fit the Colt LE6920MP-B. AFTER all the milling it now fits excellent.