Ihr Warenkorb ist leer.

Warenkorb

D.S. ARMS
AR-15/M16 MIL-SPEC BUFFER TUBE

274000018

Provides Six-Position Adjustment

M4-style receiver extension tube has six precision-machined notches on the underside for maximum flexibility in setting length-of-pull with adjustable buttstocks. Lets you install a mil-spec stock on a civilian carbine or refit a rifle with an A2-style fixed buttstock with an adjustable M4 stock. Outside diameter of tube is machined approximately .003" oversized for snug, rattle-free fit of stocks designed for mil-spec extensions. Lightly sand interior of stock to get just the right combination of snugness and freedom over movement. Machined from a lightweight aluminum extrusion before hardcoat anodizing with a wear-resistant matte black finish. Rifle conversion also requires a carbine action spring and buffer, available separately.

SPECS: Aluminum, hardcoat anodized, matte black. 7¼” (18.2cm) long, Mil-spec 1.145" to 1.150” O.D.

Mehr...

Ermöglicht sechs Positionen zur Einstellung

Der M4-Stil Empfängerverlängerungsrohr verfügt über sechs präzisionsgefräste Kerben auf der Unterseite, die maximale Flexibilität bei der Einstellung der Länge des Anschlags mit verstellbaren Schaftkappen bieten. Ermöglicht die Installation eines mil-spec Schafts auf einem zivilen Karabiner oder die Umrüstung eines Gewehrs mit einem festen A2-Stil Schaft auf einen verstellbaren M4 Schaft. Der Außendurchmesser des Rohrs ist ungefähr um .003" übergroß für eine passgenaue, klapperfreie Passform von Schäften, die für mil-spec Verlängerungen konzipiert sind. Leichtes Abschleifen des Inneren des Schafts erzielt genau die richtige Kombination aus Festigkeit und Bewegungsfreiheit. Gefräst aus einem leichten Aluminium-Strangpressprofil vor dem hartbeschichten Eloxieren mit einem verschleißfesten matten schwarzen Finish. Die Umrüstung für ein Gewehr erfordert zusätzlich eine Karabiner-Aktionfeder und Puffer, separat erhältlich.

SPECS: Aluminium, hartbeschichtet eloxiert, matt schwarz. 7¼” (18.2cm) lang, Mil-spec 1.145" bis 1.150” A.D.

Mehr...

Kundenbewertungen zu D.S. ARMS Receiver Extension Tube

Anzahl der Bewertungen: 21
Von brownells.com: 20
Durchschnittliche Bewertung: 4,1

Works with my Magpul Mil Spec MOE Stock (25.12.2009)

Great price, good finish and fit. Works well with my Magpul Mil Spec MOE stock.

Good for price! (04.03.2010)

This is a great stock for the price. However, my only complaint is for Magpul friction lock users. I have a Magpul ACS stock and the friction lock will not lock the sotck up as tight as other stocks. If you don't care about a little wiggle it is no big deal. If you want the Magpul stock to be solid you might try another stock.

Great product (12.03.2010)

I purchased two of these for builds on Aero Precision lowers. The parts were cleanly machined and nicely finished. Threaded perfectly to receiver without play. Best part is that they don't cost an arm an a leg in comparison to other manufacturers offering the same product that does the same job. I will be purchasing more and would certainly recommend. The parts seem to keep in-step to what I have read about DSA quality of manufacturing. Thank you.

Love this Tube (09.04.2010)

I just used this tube for my AR build. It worked perfectly. I did however forget to order the plate and lock nut so don't forget those when you order this part. Used with Mil spec Magpul MOE butt stock and the fit is very good will no rattling.

Nice part, well made, good value (20.06.2010)

I used this buffer tube and castle nut in building a lower receiver. The tube is well made and has a good fit and excellent finish.

I was originally looking for parts at the local gun show and couldn't find anything with better quality or finish. Even better, the price from Brownells was also less expensive by about $10.

Good tube (11.02.2011)

Great price and it has a nice tight fit with a Magpul MOE stock.

Mil spec tube (07.09.2011)

Found a great deal on an MOE stock but had the wrong buffer tube, this was a cheap fix. also remember to measure, my commercial stock had the mil spec features, but was the wrong size.

THE BEST TUBE AVAILABLE (21.09.2011)

I've been doing a few AR builds and when the time came to find an extention tube, I looked around, checked the reviews and eventually bought this one. I was concerned about the price at first; usually cheaper doesn't mean better and this one's almost half the price of the others I looked at. I liked that it was .003" over in diameter so my stock wouldn't rattle. When I got it I was surprised by how well it's made and after I installed it on my Magpul M.O.E. I was very happy. No rattle at all. Later I bought another for a Magpul A.C.S. and you can't get a better fit than that one. All in all a great tube and really well made also. Don't be fooled by the price, that's just an added bonus. This tube is the best.

Works well with Troy MOD 1 for M14/M1A! (25.10.2011)

used this for my Troy MOD 1 M14/M1A build, and it works perfectly!

Real Deal (23.11.2011)

Works great and no rattle from MOE stock. I have never seen one that fits as well as this does with so nice of a finish.

If you like it tight, almost too tight (06.02.2013)

Almost difficult to move my Vltor stock out of its closed position, but I guess to tight is better than too loose.

super (10.09.2013)

snug fit is great. I wish I had this a long time ago.

Great RE! (05.02.2014)

Finish is superb, fit is fantastic. Fit w/stock is superb, zero rattle/wobble (except fully closed, which seems to be an STR thing). This will be my go to RE from now on.

dissapointed (26.03.2014)

nice finish, looks very nice, however....
all the other reviews raved about how snug their mil spec stocks fit on this tube but mine was not the case. Ordered a mil spec MOE stock to go with it, fits loose and rattles more than my commercial MOE stock and tube. (and yes I did verify that the stock was mil spec dimentions)Over all a decent part at a good price but don't expect more.

Essential for Slide Fire Stocks! (12.04.2014)

This is the mil-spec buffer tube that you need to install any one of the Slide Fire stocks to simulate automatic fire. Of course it doesn't come with the castle nut, buffer, plate or spring. It is the correct outside diameter to allow the stock to slide freely. It's a very nice tube for the money and should last for years. Make sure to buy lots of ammo!!!

Beware of use with tight fitting stocks (08.12.2015)

My Mission First Minimalist stock won't fit over this buffer tube but does fit over the tube on my Colt LE6920.

The problem is the stock is designed for a tight fit which means it has a smaller inside diameter than mil spec and this buffer tube is designed for a tight fit which means a bigger outside diameter ( .003") than mil spec. Put the two together and they don't fit.

Supposed to be "rattle proof" (14.12.2017)

I purchased this item for a bolt action application and wanted a good fit. It isn't oversized! Mine was actually undersized when compared to a standard milspec tube and has major "rattle". This may be why it was sold at such low priced. Asked for a refund... -no word yet.

Too tight for milspec Magpul Stock (31.12.2017)

This receiver extension tube was too tight of a fit on for a milspec Magpul ACS stock. The stock will fit on, but is too tight to slide freely when released. Same stock slides as it should on three other receiver extensions.

Receiver extension worked with a standard buttstock that had more play in it.

Good quality tube (04.01.2018)

This tube fit with normal small amount of play on Colt M4 carbine and Magpul CTR stocks. Solid construction and finish.

DSA extension tube (10.03.2018)

I've purchased three of the DSA buffer extension tubes. I'm using Magpul CTR stocks and each have fit perfectly. The Magpul lock up design snugs the stock to the extension tube and there is zero rattle or play. Very nice set up in my opinion. I'll buy more when the need arrives. I recommend.

Etwas kürzer als der DPMS (09.08.2018)

Einen besseren halt konnte ich aber trotz des leicht größeren
Durchmessers nicht feststellen.
Ist etwas kürzer als Handelsüblich, wie der DPMS.
Verarbeitung ist aber gut.

Lesen Sie 20 weitere Bewertungen bei brownells.com

30.9 30.9 1 EUR

Artikel-Nr.: 274000018
D.S. ARMS Receiver Extension Tube
Herstellerproduktnummer: MAM4BFR6 Der M4-Stil Empfängerverlängerungsrohr verfügt über sechs präzisionsgefräste Kerben auf der Unterseite, die maximale Flexibilität bei der Einstellung der Länge des Anschlags mit verstellbaren Schaftkappen bieten. Ermöglicht die Installation eines mil-spec Schafts auf einem zivilen Karabiner oder die Umrüstung eines Gewehrs mit einem festen A2-Stil Schaft auf einen verstellbaren M4 Schaft. Der Außendurchmesser des Rohrs ist ungefähr um .003" übergroß für eine passgenaue, klapperfreie Passform von Schäften, die für mil-spec Verlängerungen konzipiert sind. Leichtes Abschleifen des Inneren des Schafts erzielt genau die richtige Kombination aus Festigkeit und Bewegungsfreiheit. Gefräst aus einem leichten Aluminium-Strangpressprofil vor dem hartbeschichten Eloxieren mit einem verschleißfesten matten schwarzen Finish. Die Umrüstung für ein Gewehr erfordert zusätzlich eine Karabiner-Aktionfeder und Puffer, separat erhältlich.

30.9 EUR 0 30,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.

Eigenschaften: Art: Mil-Spec Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Mil-Spec Hersteller/Modell: AR-15 Versandgewicht: 0,068kg Versandhöhe: 18mm Versandbreite: 56mm Versandlänge: 201mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Provides Six-Position Adjustment

SPECS: Aluminum, hardcoat anodized, matte black. 7¼” (18.2cm) long, Mil-spec 1.145" to 1.150” O.D.

Mehr...

Ermöglicht sechs Positionen zur Einstellung

SPECS: Aluminium, hartbeschichtet eloxiert, matt schwarz. 7¼” (18.2cm) lang, Mil-spec 1.145" bis 1.150” A.D.

Mehr...

Kundenbewertungen zu D.S. ARMS Receiver Extension Tube

Anzahl der Bewertungen: 21
Von brownells.com: 20
Durchschnittliche Bewertung: 4,1

Works with my Magpul Mil Spec MOE Stock (25.12.2009)

Great price, good finish and fit. Works well with my Magpul Mil Spec MOE stock.

Good for price! (04.03.2010)

Great product (12.03.2010)

Love this Tube (09.04.2010)

Nice part, well made, good value (20.06.2010)

Good tube (11.02.2011)

Great price and it has a nice tight fit with a Magpul MOE stock.

Mil spec tube (07.09.2011)

Found a great deal on an MOE stock but had the wrong buffer tube, this was a cheap fix. also remember to measure, my commercial stock had the mil spec features, but was the wrong size.

THE BEST TUBE AVAILABLE (21.09.2011)

Works well with Troy MOD 1 for M14/M1A! (25.10.2011)

used this for my Troy MOD 1 M14/M1A build, and it works perfectly!

Real Deal (23.11.2011)

Works great and no rattle from MOE stock. I have never seen one that fits as well as this does with so nice of a finish.

If you like it tight, almost too tight (06.02.2013)

Almost difficult to move my Vltor stock out of its closed position, but I guess to tight is better than too loose.

super (10.09.2013)

snug fit is great. I wish I had this a long time ago.

Great RE! (05.02.2014)

Finish is superb, fit is fantastic. Fit w/stock is superb, zero rattle/wobble (except fully closed, which seems to be an STR thing). This will be my go to RE from now on.

dissapointed (26.03.2014)

Essential for Slide Fire Stocks! (12.04.2014)

Beware of use with tight fitting stocks (08.12.2015)

Supposed to be "rattle proof" (14.12.2017)

Too tight for milspec Magpul Stock (31.12.2017)

Good quality tube (04.01.2018)

This tube fit with normal small amount of play on Colt M4 carbine and Magpul CTR stocks. Solid construction and finish.

DSA extension tube (10.03.2018)

Etwas kürzer als der DPMS (09.08.2018)

Einen besseren halt konnte ich aber trotz des leicht größeren
Durchmessers nicht feststellen.
Ist etwas kürzer als Handelsüblich, wie der DPMS.
Verarbeitung ist aber gut.

Lesen Sie 20 weitere Bewertungen bei brownells.com

Kunden kauften auch
Alternativen

MAGPUL AR-15 CTR Schubschaft, Mil-Spec FDE braun
MAGPUL AR-15 CTR Schubschaft, Mil-Spec

MAGPUL

Auf Lager

90,90 € *

Hinterschäfte

4,8

ERGO GRIPS AR-15/M16 M4 Receiver Castle Nut
ERGO GRIPS AR-15 RECEIVER EXTENSION CASTLE NUT

ERGO GRIPS

Auf Lager

15,80 € *

Beschläge für Puffergehäuse

BROWNELLS CAR-15 Receiver End Plate
BROWNELLS AR-15/M16 RECEIVER END PLATE

BROWNELLS

Auf Lager

11,10 € *

Beschläge für Puffergehäuse

BRAVO COMPANY AR-15/M16 BCMGUNFIGHTER QD END PLATE
BRAVO COMPANY AR-15/M16 QUICK DETACH RECEIVER END PLATE

BRAVO COMPANY

Auf Lager

29,90 € *

Beschläge für Puffergehäuse

MAGPUL MOE K2 Griff Polymer schwarz
MAGPUL MOE K2 Griff Polymer

MAGPUL

Auf Lager

30,90 € *

Pistolengriffe

4,5

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.