Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

Wheeler
Delta Series AR Receiver Lapping Tool

661120412564 EU1001220

Kundenbewertungen zu Wheeler AR-10 Receiver Lapping Tool

Anzahl der Bewertungen: 2
Durchschnittliche Bewertung: 2

Not ready to use. Needs to be re-machined. (08.07.2021)
As delivered, the lapping face was out-of-true with the guide shaft and the surface finish was terrible. The edge of the lapping face was dented. The end of the tool was badly damaged but not in a critical place. It looked as if it had been hit with an ax. After trueing the tool on a lathe, it worked fine, but if I had tried to use it as delivered, I could easily have damaged my rifle. The supplied lapping compound removes material quickly. I recommend to turn the tool by hand and not with a drill.

Not ready to use. Needs to be re-machined. (03.07.2021)
The surface finish on the lapping face is not acceptable and the tool has suffered an impact, further distorting the face. The end face (not functionally important) looks like it was hit with an ax. After truing on a lathe, it will be ok, but if it is used as delivered, it will probably damage the rifle. The dimension and surface finish of the cylinder that locates in the upper receiver is ok.
44.9 44.9 2 EUR
Artikel-Nr.: EU1001220
Wheeler AR-10 Receiver Lapping Tool
Herstellerproduktnummer: 1082227 661120412564 Beseitige einen Faktor der Ungenauigkeit mit dem Wheeler Rifle Variant Receiver Lapping Tool. Eine perfekte Passung des Receivers zum Lauf ist entscheidend für die Präzision. Dieses aus Stahl gefertigte Werkzeug, zusammen mit der mitgelieferten 220er Körnung Läpppaste, macht das Läppen schnell und einfach, um eine perfekt ebene und wahre Oberfläche zu gewährleisten, die dir hilft, eine präzise, leistungsstarke Waffe zu erzielen.
44.9 EUR 0 44,90 € *
Lieferzeit ca. 2-5 Tage.
Mehr als 10 Stk. im Lager Europa
Eigenschaften: Hersteller/Modell: AR .308

Originalbeschreibung

Eliminate a factor of inaccuracy with the Wheeler Rifle Variant Receiver Lapping Tool. A perfect fit of the receiver to the barrel is vital when it comes to accuracy. This steel-constructed tool, along with the provided 220 Grit lapping compound, will make lapping quick and easy, to ensure a perfectly square and true surface that will help you achieve an accurate, high performing gun.

Eigenschaften

Hersteller/Modell: AR .308 Versandgewicht: 1,21kg Versandhöhe: 51mm Versandbreite: 127mm Versandlänge: 292mm

Auto-Übersetzung der Beschreibung

Beseitige einen Faktor der Ungenauigkeit mit dem Wheeler Rifle Variant Receiver Lapping Tool. Eine perfekte Passung des Receivers zum Lauf ist entscheidend für die Präzision. Dieses aus Stahl gefertigte Werkzeug, zusammen mit der mitgelieferten 220er Körnung Läpppaste, macht das Läppen schnell und einfach, um eine perfekt ebene und wahre Oberfläche zu gewährleisten, die dir hilft, eine präzise, leistungsstarke Waffe zu erzielen.



Artikel-Nr.: EU1001219
Delta Series AR 15 Receiver Lapping Tool
Herstellerproduktnummer: 156757 661120567578 Das Läppen eines Empfängers stellt sicher, dass eine perfekt quadratische und wahre Oberfläche für die Passung des Laufs erzeugt wird, was die Präzision erhöht. Die Ausrichtung von Upper Receiver und Lauf ist entscheidend für die Genauigkeit. Zudem kann das Honen der Oberfläche eine optimale Positionierung der Laufmutter ermöglichen, sodass ideales Drehmoment erreicht werden kann, zusammen mit einer korrekten Ausrichtung des Gasrohrlochs. Verwende es mit einem akkubetriebenen oder elektrischen Bohrer, um die Empfängerfläche eines AR-15 zu ebnen. Es hilft, das Gasrohr durch die Löcher der Laufmutter zu führen und unterstützt die Ausrichtung von vorderen und hinteren A2-Stil Visiereinrichtungen.
44.9 EUR 0 44,90 € *
Lieferzeit ca. 2-5 Tage.
2 Stk. im Lager Europa
Eigenschaften: Hersteller/Modell: AR-15

Kundenbewertungen zu Wheeler AR-10 Receiver Lapping Tool

Anzahl der Bewertungen: 2
Durchschnittliche Bewertung: 2

Not ready to use. Needs to be re-machined. (08.07.2021)
As delivered, the lapping face was out-of-true with the guide shaft and the surface finish was terrible. The edge of the lapping face was dented. The end of the tool was badly damaged but not in a critical place. It looked as if it had been hit with an ax. After trueing the tool on a lathe, it worked fine, but if I had tried to use it as delivered, I could easily have damaged my rifle. The supplied lapping compound removes material quickly. I recommend to turn the tool by hand and not with a drill.

Not ready to use. Needs to be re-machined. (03.07.2021)
The surface finish on the lapping face is not acceptable and the tool has suffered an impact, further distorting the face. The end face (not functionally important) looks like it was hit with an ax. After truing on a lathe, it will be ok, but if it is used as delivered, it will probably damage the rifle. The dimension and surface finish of the cylinder that locates in the upper receiver is ok.
Newsletter