Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland
713000083
Easily Removes Screw-In Extractor Rods Without Damage To Rod Or Cylinder Yoke
Easy to use tool enables fast removal and reinstallation of screw-in extractor rods from double action revolvers without damage to rod or cylinder yoke. Specifically designed for Smith & Wesson J/K/L/N frame models and Ruger® Security-Six® and Speed-Six®, but will work on almost any similar screw-in rod. Just slide the extractor rod into the correct-size grooves on the tool, close the tool halves around the rod by tightening the two hex head bolts on either side of the rod using the included Allen wrench, and simply unscrew the rod with the tool while holding the cylinder. Grooves are precision machined to provide complete, 100% contact with the rod. Tool body of 6061 T6 aluminum is strong enough to provide years of service, yet soft enough to aid in securely gripping polished steel extractor rod without slippage or marring of rod surface.
SPECS: Aluminum, anodized, natural silver finish. Steel bolts, black oxide finish. Fits Smith & Wesson J, K, L and N frame revolvers and clones, Ruger Security-Six/Speed-Six, and older revolvers with button heads on the extractor rod front. Includes hex wrench and instructions.
62.9 62.9 1 EUR
Artikel-Nr.: 713000083
POWER CUSTOM Universal Extractor Rod Wrench
Herstellerproduktnummer: NONE Dieses leicht zu verwendende Werkzeug ermöglicht das schnelle Entfernen und Wiederanbringen von schraubbaren Extraktorstangen bei Double-Action-Revolvern, ohne die Stange oder den Zylinderbügel zu beschädigen. Speziell konzipiert für Smith & Wesson J/K/L/N Rahmenmodelle und Ruger® Security-Six® und Speed-Six®, funktioniert aber auch bei fast allen ähnlichen schraubbaren Stangen. Führe einfach die Extraktorstange in die passenden Rillen des Werkzeugs ein, schließe die Werkzeughälften um die Stange, indem du die beiden Sechskantbolzen an beiden Seiten der Stange mit dem beiliegenden Inbusschlüssel festziehst und drehe dann einfach die Stange mit dem Werkzeug heraus, während du den Zylinder festhältst. Die Rillen sind präzisionsgefertigt, um vollen, 100%igen Kontakt mit der Stange zu gewährleisten. Der Werkzeugkörper aus 6061 T6 Aluminium ist stark genug, um jahrelangen Service zu bieten, und gleichzeitig weich genug, um die polierte Stahlextraktorstange sicher zu greifen, ohne zu rutschen oder die Oberfläche der Stange zu beschädigen.
62.9 EUR 2 62,90 € *
Lieferzeit ca. 14-21 Tage.
2 Stk. im Großlager
Eigenschaften: Hersteller/Modell: Universal Handguns

Eigenschaften

Hersteller/Modell: Universal Handguns Versandgewicht: 0,136kg Versandhöhe: 20mm Versandbreite: 108mm Versandlänge: 208mm

Artikeldetails

Made in USA



Easily Removes Screw-In Extractor Rods Without Damage To Rod Or Cylinder Yoke
Easy to use tool enables fast removal and reinstallation of screw-in extractor rods from double action revolvers without damage to rod or cylinder yoke. Specifically designed for Smith & Wesson J/K/L/N frame models and Ruger® Security-Six® and Speed-Six®, but will work on almost any similar screw-in rod. Just slide the extractor rod into the correct-size grooves on the tool, close the tool halves around the rod by tightening the two hex head bolts on either side of the rod using the included Allen wrench, and simply unscrew the rod with the tool while holding the cylinder. Grooves are precision machined to provide complete, 100% contact with the rod. Tool body of 6061 T6 aluminum is strong enough to provide years of service, yet soft enough to aid in securely gripping polished steel extractor rod without slippage or marring of rod surface.
SPECS: Aluminum, anodized, natural silver finish. Steel bolts, black oxide finish. Fits Smith & Wesson J, K, L and N frame revolvers and clones, Ruger Security-Six/Speed-Six, and older revolvers with button heads on the extractor rod front. Includes hex wrench and instructions.
Newsletter