No More Cockeyed Ramps Or Mounts; Tap Has To Enter Straight
Efficient, positive jig that eliminates the stoop-squint, slant-slope, tilt-tip method of trying to be sure that a tap is square in the hole. Works equally well on flat or round surfaces. On tapered barrels, the milled "V" can be shimmed to ensure true tap entry. Handles all tap sizes from 3/8" to 0-80, except No. 12 and No. 14. Wood block holds bushing assortment and has holes for regularly used taps.
SPECS: Blued steel. Taps and tap wrench NOT included.
Mehr...
Nie wieder schiefe Rampen oder Montagen; Gewindebohrer muss gerade eintreten
Effiziente, zuverlässige Vorrichtung, die die mühsame Methode des Beugens, Kneifens, Schräghaltens und Kippens überflüssig macht, um sicherzustellen, dass ein Gewindebohrer rechtwinklig im Loch sitzt. Funktioniert gleichermaßen gut auf flachen oder runden Oberflächen. Bei konischen Läufen kann die gefräste "V"-Nut mit Unterlegscheiben justiert werden, um einen wahren Gewindeansatz zu gewährleisten. Passt für alle Gewindebohrergrößen von 3/8" bis 0-80, außer Nr. 12 und Nr. 14. Ein Holzblock hält das Sortiment an Buchsen und hat Löcher für regelmäßig verwendete Gewindebohrer.
SPECS: Blauer Stahl. Gewindebohrer und Gewindebohrerschlüssel NICHT enthalten.
Mehr...
Kundenbewertungen zu BROWNELLS Taprite Kit
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
BUY IT!(02.11.2010)
I've had one of these for about 35 years, and I don't think I've busted a tap since I bought it. It will pay for itself in very short order with peace of mind, no more busted taps, and more precise results. You can use it in tight spots you can't get at easily with other tapping guides, and it works with any sort of tap wrench.
I bought five sets for the technicians at my last job, and they all loved them.
Should have bought one years ago(24.08.2013)
This tool is great. Taps go in straight every time. Wish I bought one 30 years ago. To bad the kit does not go one size smaller to include the small tap ( 3-56 ) for shotgun sight beads.
Artikel-Nr.: 357001000 BROWNELLS Taprite Kit Herstellerproduktnummer: NONE Effiziente, zuverlässige Vorrichtung, die die mühsame Methode des Beugens, Kneifens, Schräghaltens und Kippens überflüssig macht, um sicherzustellen, dass ein Gewindebohrer rechtwinklig im Loch sitzt. Funktioniert gleichermaßen gut auf flachen oder runden Oberflächen. Bei konischen Läufen kann die gefräste "V"-Nut mit Unterlegscheiben justiert werden, um einen wahren Gewindeansatz zu gewährleisten. Passt für alle Gewindebohrergrößen von 3/8" bis 0-80, außer Nr. 12 und Nr. 14. Ein Holzblock hält das Sortiment an Buchsen und hat Löcher für regelmäßig verwendete Gewindebohrer.
60.9EUR060,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
No More Cockeyed Ramps Or Mounts; Tap Has To Enter Straight
Efficient, positive jig that eliminates the stoop-squint, slant-slope, tilt-tip method of trying to be sure that a tap is square in the hole. Works equally well on flat or round surfaces. On tapered barrels, the milled "V" can be shimmed to ensure true tap entry. Handles all tap sizes from 3/8" to 0-80, except No. 12 and No. 14. Wood block holds bushing assortment and has holes for regularly used taps.
SPECS: Blued steel. Taps and tap wrench NOT included.
Mehr...
Nie wieder schiefe Rampen oder Montagen; Gewindebohrer muss gerade eintreten
Effiziente, zuverlässige Vorrichtung, die die mühsame Methode des Beugens, Kneifens, Schräghaltens und Kippens überflüssig macht, um sicherzustellen, dass ein Gewindebohrer rechtwinklig im Loch sitzt. Funktioniert gleichermaßen gut auf flachen oder runden Oberflächen. Bei konischen Läufen kann die gefräste "V"-Nut mit Unterlegscheiben justiert werden, um einen wahren Gewindeansatz zu gewährleisten. Passt für alle Gewindebohrergrößen von 3/8" bis 0-80, außer Nr. 12 und Nr. 14. Ein Holzblock hält das Sortiment an Buchsen und hat Löcher für regelmäßig verwendete Gewindebohrer.
SPECS: Blauer Stahl. Gewindebohrer und Gewindebohrerschlüssel NICHT enthalten.
Mehr...
Kundenbewertungen zu BROWNELLS Taprite Kit
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
BUY IT!(02.11.2010)
I've had one of these for about 35 years, and I don't think I've busted a tap since I bought it. It will pay for itself in very short order with peace of mind, no more busted taps, and more precise results. You can use it in tight spots you can't get at easily with other tapping guides, and it works with any sort of tap wrench.
I bought five sets for the technicians at my last job, and they all loved them.
Should have bought one years ago(24.08.2013)
This tool is great. Taps go in straight every time. Wish I bought one 30 years ago. To bad the kit does not go one size smaller to include the small tap ( 3-56 ) for shotgun sight beads.