Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland
811291030023 100061466
Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
52.9 52.9 1 EUR
Artikel-Nr.: 100061466
MOUNTAIN TACTICAL T3/T3X LUG
Herstellerproduktnummer: T3T3XESL 811291030023 Mountain Tactical Company freut sich, unsere Gen3 Elite Series Edelstahl Recoil Lugs für dein Tikka T3 und Tikka T3x Gewehr anzukündigen. Die neueste Generation der Recoil Lugs von Mountain Tactical ist eine bedeutende Aufwertung gegenüber der zweiten Generation. Zuvor verwendeten wir 316er Marine-Edelstahl mit einer Streckgrenze von 89.000 psi. Dies war eine große Verbesserung gegenüber dem werkseitigen Aluminium-Lug mit einer Streckgrenze von 21.000 psi oder dem T3x Mild Steel Lug mit einer Streckgrenze von 36.000 psi (deutlich weniger als der Standard-psi, der von modernen Gewehrpatronen erzeugt wird). Jetzt haben wir den Edelstahl auf 17-4PH H900 Edelstahl aufgerüstet. Die Streckgrenze dieses bemerkenswerten Stahls liegt bei 200.000 psi. Das ist 33% stärker als Titan der Güteklasse 5! Mountain Tactical fertigt stolz ihre Gen3 Elite Series Edelstahl Recoil Lugs aus 17-4PH H900 Edelstahl für höchste Widerstandsfähigkeit gegen Wettereinflüsse und eine Lebensdauer langen Service. Die Installation ist einfach. Entferne einfach die beiden Action-Schrauben und trenne deine Action vom Schaft. Mit einer Zange entfernst du das vorhandene Metallstück aus dem Schaft. Dann drücke den Elite Series Recoil Lug in dieselbe Vertiefung. Setze deine Action und den Schaft wieder zusammen und ziehe die Action-Schrauben fest. Fertig! Beachte, dass es manchmal etwas länger dauern kann, deine Action und den Schaft aufgrund der engeren Toleranzen des Recoil Lugs auszurichten. Die Recoil Lugs der Elite Series von Mountain Tactical Company für das Tikka T3 sind von höchster Qualität, die du überall finden wirst.
52.9 EUR 0 52,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften: Hersteller/Modell: Tikka Modell: T3, T3x

Eigenschaften

Hersteller/Modell: Tikka Modell: T3,T3x Versandgewicht: 0,025kg Versandhöhe: 152mm Versandbreite: 76mm Versandlänge: 152mm

Artikeldetails

Made in USA



Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
Newsletter