Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

APEX TACTICAL SPECIALTIES INC
S&W M&P M2.0 FLAT FACED FORWARD SET TRIGGER KIT

854263007227 100026293
Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system. The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots. Reduces overall trigger travel by about 40% Smooths out the trigger pull & makes it more consistent Lightens pull weight by approx. 2 lbs. to 4-6 lbs. Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns) Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols. The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols. Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols. Kit includes the following components: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (assists with installation of trigger return spring)
272.9 272.9 1 EUR
Artikel-Nr.: 100026293
APEX TACTICAL SPECIALTIES INC S&W M&P M2.0 Flat Faced Forward Set Trigger Kit
Herstellerproduktnummer: 100-154 854263007227 Das Apex Tactical S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit ist ein einfach zu installierendes Ersatzteil für den Werksabzug deiner M2.0, das dir einen leichteren, sanfteren und konsistenteren Abzug bietet. Der solide Abzugskörper sorgt für eine angenehmere Interaktion mit dem Finger und ermöglicht eine bessere Kontrolle, während die zuverlässige Funktion des werkseitigen Abzugssicherheitssystems vollständig erhalten bleibt. Der M&P M2.0 Flat-Faced Forward Set Trigger hat deutlich reduzierten Vorweg und Überweg, mit einem präzisen, entschiedenen Auslösepunkt dazwischen. Ein kürzerer, positiverer Reset bedeutet schnellere Folgeschüsse. Reduziert den gesamten Abzugsweg um ca. 40% Glättet den Abzug und macht ihn konsistenter Verringert das Abzugsgewicht um ca. 2 Pfund auf 4-6 Pfund. Das tatsächliche Abzugsgewicht hängt von den installierten Sear- und Trigger Return-Federn ab (sowie von Variationen in einzelnen Waffen) Apex beinhaltet zwei Sear-Federn und zwei Trigger Return-Federn im Kit, damit du den Abzug auf deine speziellen Schießbedürfnisse 'abstimmen' kannst. Wähle die 'Duty/Carry'-Federn, um ein Abzugsgewicht für Dienst- oder CCW-Tragepistolen einzustellen. Die Kontur des M&P M2.0 Flat-Faced Forward Set Triggers ermöglicht es dir auch, deinen Finger tiefer auf der Abzugfläche zu platzieren, um zusätzliche Hebelwirkung zu erzielen, die hilft, das geringere Abzugsgewicht optimal zu nutzen. Mit ein wenig Aufmerksamkeit auf die richtige Fingerplatzierung ist der Flat-Faced Forward Set Trigger ein hervorragender Abzug für Wettkampfpistolen. Hinweis von Brownells Gun Tech™: Dieses Apex Tactical Flat-Faced Forward Set Trigger Kit ist NUR für die Installation in Smith & Wesson M&P M2.0 Pistolen geeignet, in allen zentralfeuer Kalibern und Konfigurationen, einschließlich M&P 2.0 Compact. Nicht für die Verwendung in Original-M&P-Modellen geeignet; verwende #100-016-327 oder #100-017-344 in Original-M&P-Pistolen. Das Kit beinhaltet die folgenden Komponenten: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, Feder & Talon Tactical Tool) Slave pin (hilft bei der Installation der Trigger Return-Feder)
272.9 EUR 52 272,90 € *
Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager
Eigenschaften: Art: Flat Finish: Black Hersteller/Modell: Smith & Wesson Modell: M&P 2.0 Compact

Eigenschaften

Art: Flat Finish: Black Hersteller/Modell: Smith & Wesson Modell: M&P 2.0 Compact Versandgewicht: 0,029kg Versandhöhe: 102mm Versandbreite: 32mm Versandlänge: 97mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c



Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system. The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots. Reduces overall trigger travel by about 40% Smooths out the trigger pull & makes it more consistent Lightens pull weight by approx. 2 lbs. to 4-6 lbs. Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns) Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols. The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols. Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols. Kit includes the following components: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (assists with installation of trigger return spring)
Newsletter