Extra-Long Rails For Factory Drilled & Tapped Barrels
Lightweight, extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each, individual shooter. Matches the recent, factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings.
SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate models for 7" Long or 5-1/2" Long Heavy barrel. Includes screws, instructions.
Mehr...
Extra lange Schienen für ab Werk gebohrte & Gewinde geschnittene Läufe
Leichtgewichtige, extra lange Zielfernrohr-Schiene bietet ausreichend Länge, damit der Augenabstand für jeden einzelnen Schützen präzise angepasst werden kann. Passt zu den neueren, ab Werk gebohrten und Gewinde geschnittenen Läufen; ältere Läufe müssen gebohrt und Gewinde geschnitten werden. Akzeptiert alle Weaver-Style Ringe.
SPECS: Aluminium, schwarz, eloxiertes Finish. 6" (15cm) lang. Separate Modelle für 7" langes oder 5-1/2" langes Heavy Barrel. Inklusive Schrauben, Anleitung.
Mehr...
Kundenbewertungen zu LSP 5-1/2" Smith & Wesson
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3,5
Great Optic Mount Rail for the S&W M41(20.07.2014)
Perfect fit to the barrel contour of my 5.5" barrel Model 41. Easy installation, and my Aimpoint Micro with integral Weaver base mounted right up with no problems. The LSP rail has many more mounting spaces than the Weaver or Weigand bases and is very well made. It has a generous "U" channel down the middle that allow you to use the irons with the optic dismounted if you wish.
Product needs improvement.(20.10.2012)
Would never buy this product again, unless they fix the problem. I bought 2 of them but had to send them back. They fit the S&W model 41 ok, but scope rings don't tighten on the base. Not wide enough. Supposed to measure .829 across, but the two I had measured .810 to .818 end to end. I send them back, but they couldn't find one that measured what they should. I sure hope the fix the problem, because over all the product was great. It fit my 41 perfect but needs to be the right size so weaver style rings will work with it the way they said it will.
Artikel-Nr.: 530041055 LSP 5-1/2" Smith & Wesson Herstellerproduktnummer: 530041055 Leichtgewichtige, extra lange Zielfernrohr-Schiene bietet ausreichend Länge, damit der Augenabstand für jeden einzelnen Schützen präzise angepasst werden kann. Passt zu den neueren, ab Werk gebohrten und Gewinde geschnittenen Läufen; ältere Läufe müssen gebohrt und Gewinde geschnitten werden. Akzeptiert alle Weaver-Style Ringe.
50.9EUR850,90 €
*
Lieferzeit ca. 14-21 Tage. 8 Stk. im Großlager
Eigenschaften:Art: Weaver-Style BasesBasenanzahl: 1-PieceFarbe: BlackHersteller/Modell: Smith & WessonMaterial: AluminumModell: 41
Art:
Weaver-Style Bases
Basenanzahl:
1-Piece
Farbe:
Black
Hersteller/Modell:
Smith & Wesson
Material:
Aluminum
Modell:
41
Versandgewicht: 0,045kgVersandhöhe: 13mmVersandbreite: 79mmVersandlänge: 188mm
Artikeldetails
Made in USA
Artikel-Nr.: 530041007 LSP 7" Smith & Wesson Herstellerproduktnummer: 530041007 Leichtgewichtige, extra lange Zielfernrohr-Schiene bietet ausreichend Länge, damit der Augenabstand für jeden einzelnen Schützen präzise angepasst werden kann. Passt zu den neueren, ab Werk gebohrten und Gewinde geschnittenen Läufen; ältere Läufe müssen gebohrt und Gewinde geschnitten werden. Akzeptiert alle Weaver-Style Ringe.
50.9EUR050,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften:Art: Weaver-Style BasesBasenanzahl: 1-PieceFarbe: BlackHersteller/Modell: Smith & WessonMaterial: AluminumModell: 41
Extra-Long Rails For Factory Drilled & Tapped Barrels
Lightweight, extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each, individual shooter. Matches the recent, factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings.
SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate models for 7" Long or 5-1/2" Long Heavy barrel. Includes screws, instructions.
Mehr...
Extra lange Schienen für ab Werk gebohrte & Gewinde geschnittene Läufe
Leichtgewichtige, extra lange Zielfernrohr-Schiene bietet ausreichend Länge, damit der Augenabstand für jeden einzelnen Schützen präzise angepasst werden kann. Passt zu den neueren, ab Werk gebohrten und Gewinde geschnittenen Läufen; ältere Läufe müssen gebohrt und Gewinde geschnitten werden. Akzeptiert alle Weaver-Style Ringe.
SPECS: Aluminium, schwarz, eloxiertes Finish. 6" (15cm) lang. Separate Modelle für 7" langes oder 5-1/2" langes Heavy Barrel. Inklusive Schrauben, Anleitung.
Mehr...
Kundenbewertungen zu LSP 5-1/2" Smith & Wesson
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3,5
Great Optic Mount Rail for the S&W M41(20.07.2014)
Perfect fit to the barrel contour of my 5.5" barrel Model 41. Easy installation, and my Aimpoint Micro with integral Weaver base mounted right up with no problems. The LSP rail has many more mounting spaces than the Weaver or Weigand bases and is very well made. It has a generous "U" channel down the middle that allow you to use the irons with the optic dismounted if you wish.
Product needs improvement.(20.10.2012)
Would never buy this product again, unless they fix the problem. I bought 2 of them but had to send them back. They fit the S&W model 41 ok, but scope rings don't tighten on the base. Not wide enough. Supposed to measure .829 across, but the two I had measured .810 to .818 end to end. I send them back, but they couldn't find one that measured what they should. I sure hope the fix the problem, because over all the product was great. It fit my 41 perfect but needs to be the right size so weaver style rings will work with it the way they said it will.