Powder measure stands made by other manufacturers left us wanting. We needed something that didn't have to be bolted down, would be easily adjustable in height for each person's preference, and could be adjusted to the different bench thicknesses that you find when loading away from home. A stand is always handy for shooters who don't have space for a permanent measure stand on their reloading bench. Our stand fits easily into a field box, and is ready to go when you take your powder measure to the range or a match. One model is available for custom measures and the second model is for standard measures 7/8 to fourteen. We use the stands to raise drop tubes to a comfortable loading position. Constructed with 7/8 inch diameter stainless steel tubing and featuring three points of contact for a non-slip secure mounting position. 11-1100 C-Clamp Measures like Harrells 11-1200 7/8 inch to fourteen Measures like Redding or RCBS
Mehr...
Pulvermaßständer von anderen Herstellern ließen zu wünschen übrig. Wir benötigten etwas, das nicht festgeschraubt werden muss, einfach in der Höhe für jede persönliche Vorliebe einstellbar ist und an die verschiedenen Bench-Dicken angepasst werden kann, die man beim Laden außerhalb des eigenen Zuhauses findet. Ein Ständer ist immer praktisch für Schützen, die keinen Platz für einen permanenten Maßständer auf ihrer Wiederladebank haben. Unser Ständer passt leicht in eine Feldbox und ist einsatzbereit, wenn du dein Pulvermaß zum Schießstand oder zu einem Wettkampf mitnimmst. Ein Modell ist verfügbar für Custom-Maße und das zweite Modell für Standardmaße 7/8 bis vierzehn. Wir verwenden die Ständer, um Drop Tubes auf eine komfortable Ladeposition zu heben. Konstruiert mit 7/8 Zoll Durchmesser aus rostfreiem Stahlrohr und ausgestattet mit drei Kontaktpunkten für eine rutschfeste, sichere Montageposition. 11-1100 C-Klemme Maße wie Harrells 11-1200 7/8 Zoll bis vierzehn Maße wie Redding oder RCBS
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL Sinclair Powder Measure Stand (7/8" Style)
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Could Use Small Improvements(07.09.2012)
I bought this to replace a Redding stand that I had screwed to my reloading bench. I do not want a stand hanging over the edge of my bench, so I drilled a 1 inch hole in the bench and ran the pipe through it, with the clamp halves on either side. The 7/8 diameter hole in the stand is very tight with my Redding 3BR powder measure. It take a bit of work to force it through. The allen screw on the top piece should be replaced with a large thumbscrew, making it asier to adjust. Other than that, this a fine product.
Could be improved(07.03.2015)
Overall good quality product but as per the other reviews the 7/8" hole for the powder measure to go through is far to tight for it to fit. I had to remove material from the hole before the redding 3br I have would fit.
Artikel-Nr.: 749005752 SINCLAIR INTERNATIONAL Sinclair Powder Measure Stand (7/8" Style) Herstellerproduktnummer: 111200 Pulvermaßständer von anderen Herstellern ließen zu wünschen übrig. Wir benötigten etwas, das nicht festgeschraubt werden muss, einfach in der Höhe für jede persönliche Vorliebe einstellbar ist und an die verschiedenen Bench-Dicken angepasst werden kann, die man beim Laden außerhalb des eigenen Zuhauses findet. Ein Ständer ist immer praktisch für Schützen, die keinen Platz für einen permanenten Maßständer auf ihrer Wiederladebank haben. Unser Ständer passt leicht in eine Feldbox und ist einsatzbereit, wenn du dein Pulvermaß zum Schießstand oder zu einem Wettkampf mitnimmst. Ein Modell ist verfügbar für Custom-Maße und das zweite Modell für Standardmaße 7/8 bis vierzehn. Wir verwenden die Ständer, um Drop Tubes auf eine komfortable Ladeposition zu heben. Konstruiert mit 7/8 Zoll Durchmesser aus rostfreiem Stahlrohr und ausgestattet mit drei Kontaktpunkten für eine rutschfeste, sichere Montageposition. 11-1100 C-Klemme Maße wie Harrells 11-1200 7/8 Zoll bis vierzehn Maße wie Redding oder RCBS
74.9EUR074,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Powder measure stands made by other manufacturers left us wanting. We needed something that didn't have to be bolted down, would be easily adjustable in height for each person's preference, and could be adjusted to the different bench thicknesses that you find when loading away from home. A stand is always handy for shooters who don't have space for a permanent measure stand on their reloading bench. Our stand fits easily into a field box, and is ready to go when you take your powder measure to the range or a match. One model is available for custom measures and the second model is for standard measures 7/8 to fourteen. We use the stands to raise drop tubes to a comfortable loading position. Constructed with 7/8 inch diameter stainless steel tubing and featuring three points of contact for a non-slip secure mounting position. 11-1100 C-Clamp Measures like Harrells 11-1200 7/8 inch to fourteen Measures like Redding or RCBS
Mehr...
Pulvermaßständer von anderen Herstellern ließen zu wünschen übrig. Wir benötigten etwas, das nicht festgeschraubt werden muss, einfach in der Höhe für jede persönliche Vorliebe einstellbar ist und an die verschiedenen Bench-Dicken angepasst werden kann, die man beim Laden außerhalb des eigenen Zuhauses findet. Ein Ständer ist immer praktisch für Schützen, die keinen Platz für einen permanenten Maßständer auf ihrer Wiederladebank haben. Unser Ständer passt leicht in eine Feldbox und ist einsatzbereit, wenn du dein Pulvermaß zum Schießstand oder zu einem Wettkampf mitnimmst. Ein Modell ist verfügbar für Custom-Maße und das zweite Modell für Standardmaße 7/8 bis vierzehn. Wir verwenden die Ständer, um Drop Tubes auf eine komfortable Ladeposition zu heben. Konstruiert mit 7/8 Zoll Durchmesser aus rostfreiem Stahlrohr und ausgestattet mit drei Kontaktpunkten für eine rutschfeste, sichere Montageposition. 11-1100 C-Klemme Maße wie Harrells 11-1200 7/8 Zoll bis vierzehn Maße wie Redding oder RCBS
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL Sinclair Powder Measure Stand (7/8" Style)
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Could Use Small Improvements(07.09.2012)
I bought this to replace a Redding stand that I had screwed to my reloading bench. I do not want a stand hanging over the edge of my bench, so I drilled a 1 inch hole in the bench and ran the pipe through it, with the clamp halves on either side. The 7/8 diameter hole in the stand is very tight with my Redding 3BR powder measure. It take a bit of work to force it through. The allen screw on the top piece should be replaced with a large thumbscrew, making it asier to adjust. Other than that, this a fine product.
Could be improved(07.03.2015)
Overall good quality product but as per the other reviews the 7/8" hole for the powder measure to go through is far to tight for it to fit. I had to remove material from the hole before the redding 3br I have would fit.