Ihr Warenkorb ist leer.

Warenkorb

Newsletter abonnieren

TIMNEY
REMINGTON 788 TRIGGER W/SAFETY

081950007882 883000009

Provides A Light, Clean Break To Help You Get The Best Possible Accuracy

Single-stage replacement trigger delivers alight, crisp, clean trigger pull that helps you enjoy the full accuracy potential of your Remington 788. Adjustable for weight of pull (1½" to 3½" lb.) and overtravel. Includes safety and bolt stop.

SPECS: Aluminum housing, heat-treated steel internals, matte black finish. Polished sear/trigger surfaces. Smooth .150" (3.9mm) wide shoe. Fits right-hand Remington 788 rifles only. Includes installation instructions.

Mehr...

Bietet einen leichten, sauberen Auslösevorgang, um die bestmögliche Präzision zu erzielen

Ersatz-Abzug für die Einzelstufe liefert einen leichten, knackigen, sauberen Abzugswiderstand, der dir hilft, das volle Genauigkeitspotenzial deines Remington 788 auszuschöpfen. Einstellbar für Abzugsgewicht (1½" bis 3½" lb.) und Overtravel. Sicherheit und Verschlussstopp inbegriffen.

SPECS: Gehäuse aus Aluminium, innere Teile aus wärmebehandeltem Stahl, matte schwarze Oberfläche. Polierte Sear/Trigger-Oberflächen. Glatter .150" (3.9mm) breiter Schuh. Passt nur für Rechtshänder Remington 788 Gewehre. Installationsanleitung inbegriffen.

Mehr...

Kundenbewertungen zu TIMNEY Remington 788 Trigger w/Safety

Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,8

this is a great product (08.08.2012)

the installation was very simple and quick, I would recommend this trigger to anyone who dislikes the factory trigger, it is quite an improvement over the factory trigger!

On the money (07.10.2013)

This turned a great old 788 in .308 into a new rifle!!!!
First shot after installation and function check,
Suprised me!
Great upgrade!!! :-)

Makes a great rifle even better!! (04.04.2016)

The Remington 788 is probably one of the best actions ever produced; especially for the price. It already was a tack driver back in the 1970's. But, I'd already added a synthetic stock, Picatinny rail, Nikon scope and Harris bi-pod. The adjustable trigger was the icing. And, this is a fantastic improvement. Easy to install, strongly built, and a smooth & crisp performer. No slop, no creep...just a trigger that does as intended. I would highly recommend this item to anyone looking to make their rifle shoot better. If you don't improve your accuracy it won't be due to the trigger.

Great trigger, but: (11.07.2017)

I have owned my 788 for about 40 years and hunt deer and sometimes even shoot varmints with it. I now have it on a composite stock, with a Bushnell scope. The Timney trigger was my most recent modification. Once the trigger was installed it really rounded out the function of the rifle. No more trigger creep or checking to see if the safety is actually on because the trigger pull was so heavy. My only problem was in installation. The roll pin holes on the trigger housing were too small. I had to drill out the holes, one drill bit size larger and now it fits and is still as snug as it should be. I think this may be due to the early run of this particular rifle. One interesting thing on this trigger: I was going to modify the composite stock when using the factory trigger because I couldn't get the safety to completely engage. I'm glad I didn't because now the Timney safety lever fits perfectly on the new stock!

Smooth and crisp, as advertised (19.08.2018)

I replaced an "OK" but well used and non adjustable factory trigger in an old workhorse 788 in .308 with the Timney.

No real problems installing it myself, but a couple cautions. An earlier reviewer stated he could not get the roll pin started in the Timney housing and enlarged the roll pin hole with his handy cordless drill. Use lots of caution here if you try this. The Timney housing is aluninum or some similar alloy. Also, I suggest you have a Dremel tool handy if you do need to relieve the stock. My 788 had a Richards Micro-fit stock and required quite a bit of relieving. If you need to do this you're not going to want to do it with a pen knife. The factory spec sheet said the trigger was set at 2.5 #. My scale showed it to be 2.25# using several measurements. I left it right there. Great trigger. Good investment.

Lesen Sie 5 weitere Bewertungen bei brownells.com

302.9 302.9 1 EUR

Artikel-Nr.: 883000009
TIMNEY Remington 788 Trigger w/Safety
Herstellerproduktnummer: 788 081950007882 Ersatz-Abzug für die Einzelstufe liefert einen leichten, knackigen, sauberen Abzugswiderstand, der dir hilft, das volle Genauigkeitspotenzial deines Remington 788 auszuschöpfen. Einstellbar für Abzugsgewicht (1½" bis 3½" lb.) und Overtravel. Sicherheit und Verschlussstopp inbegriffen.

302.9 EUR 15 302,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Art: Adjustable Hersteller/Modell: Remington Modell: 788

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Adjustable Hersteller/Modell: Remington Modell: 788 Versandgewicht: 0,023kg Versandhöhe: 33mm Versandbreite: 79mm Versandlänge: 104mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c

Provides A Light, Clean Break To Help You Get The Best Possible Accuracy

Mehr...

Bietet einen leichten, sauberen Auslösevorgang, um die bestmögliche Präzision zu erzielen

Mehr...

Kundenbewertungen zu TIMNEY Remington 788 Trigger w/Safety

Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,8

this is a great product (08.08.2012)

the installation was very simple and quick, I would recommend this trigger to anyone who dislikes the factory trigger, it is quite an improvement over the factory trigger!

On the money (07.10.2013)

This turned a great old 788 in .308 into a new rifle!!!!
First shot after installation and function check,
Suprised me!
Great upgrade!!! :-)

Makes a great rifle even better!! (04.04.2016)

Great trigger, but: (11.07.2017)

Smooth and crisp, as advertised (19.08.2018)

Lesen Sie 5 weitere Bewertungen bei brownells.com

Kunden kauften auch

GRACO CORP GraCoil Universal Fitting Fixture
GRACO CORP UNIVERSAL FITTING FIXTURE

GRACO CORP

Bestellbar, nicht vorrätig

87,90 € *

Werkzeug für Schaftkappen

4,6

EGW REMINGTON 788 LONG ACTION SCOPE BASES - EGW Remington 788 Long Action 0 MOA

EGW Remington 788 Long Action 0 MOA
EGW REMINGTON 788 LONG ACTION SCOPE BASES

EGW

Bestellbar, nicht vorrätig

63,90 € *

Prismen für Langwaffen

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.