EGW Remington 783 Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mehr...
EGW Remington 783 Short Action Scope Bases. Erweitere Deine Flinte um die Vielseitigkeit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Schlitz- und Schienenabständen, die schnelle und einfache Änderungen des Augenabstands ermöglichen, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Empfänger der Waffe zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohringe. Leichte Tactical-Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus extrem steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauer Loctite für die Montage.
Mehr...
Kundenbewertungen zu EGW Remington 783 Short Action 0 MOA
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3,5
Good quality, good price, but...(18.06.2015)
Mounted this Rail on my Remington 783 short action on .308 (great, accurate rifle) and installation went just fine, screws fitted properly and the rail sat just fine, no need to lap it. I had to change the scope rings from short to medium height because the Nikon scope would rest on top of the rail in the front (the part that goes over the Barrel nut) just be aware of that, in case you own a short scope. The rail added height also I think it needs to be thinner. Other than that is a great product. I would recommend it.
Good construction / Bad fitment(17.05.2017)
I picked up this rail a few days back, right off the bat i was very dissapointed as i could not operate the bolt after installation. The extended piece of rail over the rear of the bolt just slightly blocked the bolt from opening and closing. So be prepared to do some light maching to make this rail work properly.
Artikel-Nr.: 296000235 EGW Remington 783 Short Action 0 MOA Herstellerproduktnummer: 40910841370105335 EGW Remington 783 Short Action Scope Bases. Erweitere Deine Flinte um die Vielseitigkeit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Schlitz- und Schienenabständen, die schnelle und einfache Änderungen des Augenabstands ermöglichen, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Empfänger der Waffe zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohringe. Leichte Tactical-Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus extrem steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauer Loctite für die Montage.
Art:
Picatinny Rail
Farbe:
Black
Finish:
Black
Hersteller/Modell:
Remington
Material:
Aluminum
Modell:
783
Versandgewicht: 0,045kgVersandhöhe: 18mmVersandbreite: 79mmVersandlänge: 224mm
Artikeldetails
Made in USA
Artikel-Nr.: 296000379 EGW Remington 783 Short Action 20 MOA Herstellerproduktnummer: 40912841370112609 EGW Remington 783 Short Action Scope Bases. Erweitere Deine Flinte um die Vielseitigkeit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Schlitz- und Schienenabständen, die schnelle und einfache Änderungen des Augenabstands ermöglichen, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Empfänger der Waffe zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohringe. Leichte Tactical-Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus extrem steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauer Loctite für die Montage.
63.9EUR063,90 €
*
Wird nach Ihrer Bestellung beim Lieferanten beschafft Lieferzeit ca. 4-12 Wochen.
EGW Remington 783 Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mehr...
EGW Remington 783 Short Action Scope Bases. Erweitere Deine Flinte um die Vielseitigkeit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Schlitz- und Schienenabständen, die schnelle und einfache Änderungen des Augenabstands ermöglichen, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Empfänger der Waffe zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohringe. Leichte Tactical-Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus extrem steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauer Loctite für die Montage.
Mehr...
Kundenbewertungen zu EGW Remington 783 Short Action 0 MOA
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3,5
Good quality, good price, but...(18.06.2015)
Mounted this Rail on my Remington 783 short action on .308 (great, accurate rifle) and installation went just fine, screws fitted properly and the rail sat just fine, no need to lap it. I had to change the scope rings from short to medium height because the Nikon scope would rest on top of the rail in the front (the part that goes over the Barrel nut) just be aware of that, in case you own a short scope. The rail added height also I think it needs to be thinner. Other than that is a great product. I would recommend it.
Good construction / Bad fitment(17.05.2017)
I picked up this rail a few days back, right off the bat i was very dissapointed as i could not operate the bolt after installation. The extended piece of rail over the rear of the bolt just slightly blocked the bolt from opening and closing. So be prepared to do some light maching to make this rail work properly.