Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

TECH TEN TACTICAL
QD STOCK INSERT FOR B5 SOPMOD STOCK

850009665072 100042578
The patent pending Tech Ten Tactical B5 Enhanced SOPMOD stock Insert adds another QD attachment point to your B5 Enhanced or Government SOPMOD stocks. If you own this stock with or without a QD attachment point, then this insert is for you. Once the insert is installed in the front of the stock it places your sling in the ideal location, away from your pistol grip and not at the rear of your stock. Also, it allows your sling to pivot up to 220 degrees when used with the Ten Tech Tactical Swinger Sling Mount (sold separately) or up to 140 degrees with a standard QD. Installation is quick and easy. B5 Insert Features Adds a QD attachment point to the front of the B5 Enhanced SOPMOD Stock, placing it in an ideal location, away from your pistol grip but not at the back of your stock Currently in use with military, law enforcement, and government agencies Constructed from 7075 aircraft-grade aluminum with a MIL-SPEC Type III hard anodized coating. Anchored with a 3/16"" stainless steel roll pin Installation is easy and takes less than five minutes Manufactured with pride in the United States Stock not included * The B5 and LMT inserts are not interchangeable. This is the proper insert for the B5 Enhanced SOPMOD stock.
53.9 53.9 1 EUR
Artikel-Nr.: 100042578
TECH TEN TACTICAL QD STOCK INSERT FOR B5 SYSTEMS SOPMOD GOVERNMENT STOCKS
Herstellerproduktnummer: 101 850009665072 Das patentrechtlich geschützte Tech Ten Tactical B5 Enhanced SOPMOD Stock Insert fügt deinem B5 Enhanced oder Government SOPMOD Schaft einen weiteren QD-Befestigungspunkt hinzu. Wenn du diesen Schaft besitzt, mit oder ohne QD-Befestigungspunkt, dann ist dieses Insert genau das Richtige für dich. Nach der Installation im vorderen Bereich des Schafts platziert es deinen Sling an der idealen Stelle, weg vom Pistolengriff und nicht am Ende deines Schafts. Außerdem ermöglicht es deinem Sling, sich bis zu 220 Grad zu drehen, wenn es mit dem Ten Tech Tactical Swinger Sling Mount (separat erhältlich) verwendet wird, oder bis zu 140 Grad mit einem Standard-QD. Die Installation ist schnell und einfach. B5 Insert Features Fügt einen QD-Befestigungspunkt an der Vorderseite des B5 Enhanced SOPMOD Schafts hinzu, der ihn an einer idealen Stelle platziert, weg vom Pistolengriff, aber nicht am hinteren Ende des Schafts Wird derzeit von militärischen, Strafverfolgungsbehörden und Regierungsagenturen verwendet Hergestellt aus 7075 Flugzeug-Aluminium mit einer MIL-SPEC Type III hart anodisierten Beschichtung. Verankert mit einem 3/16'' Edelstahlrollstift Die Installation ist einfach und dauert weniger als fünf Minuten Mit Stolz hergestellt in den Vereinigten Staaten Schaft nicht inbegriffen * Die B5 und LMT Inserts sind nicht austauschbar. Dies ist das richtige Insert für den B5 Enhanced SOPMOD Schaft.
53.9 EUR 21 53,90 € *
Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager
Eigenschaften: Farbe: Black

Eigenschaften

Farbe: Black Versandgewicht: 0,027kg Versandhöhe: 25mm Versandbreite: 102mm Versandlänge: 152mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1



The patent pending Tech Ten Tactical B5 Enhanced SOPMOD stock Insert adds another QD attachment point to your B5 Enhanced or Government SOPMOD stocks. If you own this stock with or without a QD attachment point, then this insert is for you. Once the insert is installed in the front of the stock it places your sling in the ideal location, away from your pistol grip and not at the rear of your stock. Also, it allows your sling to pivot up to 220 degrees when used with the Ten Tech Tactical Swinger Sling Mount (sold separately) or up to 140 degrees with a standard QD. Installation is quick and easy. B5 Insert Features Adds a QD attachment point to the front of the B5 Enhanced SOPMOD Stock, placing it in an ideal location, away from your pistol grip but not at the back of your stock Currently in use with military, law enforcement, and government agencies Constructed from 7075 aircraft-grade aluminum with a MIL-SPEC Type III hard anodized coating. Anchored with a 3/16"" stainless steel roll pin Installation is easy and takes less than five minutes Manufactured with pride in the United States Stock not included * The B5 and LMT inserts are not interchangeable. This is the proper insert for the B5 Enhanced SOPMOD stock.
Newsletter