Vertical Forend Grip With Built-In Quick-Deploy Bipod
Dual-function vertical grip locks to the bottom accessory rail of your tactical rifle’s forend to give you enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. GPS-02 has steel inserts in legs for maximum strength in high-stress tactical operations.
SPECS: Reinforced polymer, Black. 6¼" (15.9cm) long with legs retracted. 8½" (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. GPS-02 – Steel inserts in legs. 7.8 oz. (220g) weight.
Mehr...
Vertikaler Vordergriff mit integriertem Schnellauslöse-Zweibein
Dieser zweifunktionale vertikale Griff sichert am unteren Zubehörschienen deines taktischen Gewehrs Vorderende und bietet dir verbesserte Kontrolle im Nahkampf sowie eine stabile Zweibeinstütze für präzises Schießen auf große Entfernungen. Die handausfüllenden Konturen und tiefen Rillen des Griffs bieten selbst bei nassen Händen einen festen Halt. Drücke den großen, tief gerillten Auslöseknopf, und eine kräftige Feder fährt die Beine sofort aus. Der für die Daumenaktivierung günstig platzierte Knopf liegt bündig mit der umgebenden Oberfläche, um ein versehentliches Ausfahren zu verhindern. Ausgefahrene Beine bieten ausreichend Erhöhung, damit ein Standardmagazin mit 30 Patronen den Boden nicht berührt, und verfangen sich nicht in Gestrüpp, Fahrzeuginnerem oder anderer Ausrüstung, wenn sie eingefahren sind. Beine und Griff bestehen aus robustem, spritzgegossenem Polymer; Stahlquerbolzen mit griffiger Daumenschraube verriegelt direkt an jeder MIL-STD 1913 Picatinny-Schiene für eine steinfeste Befestigung. GPS-02 hat Stahleinsätze in den Beinen für maximale Stärke bei hochbelastenden taktischen Operationen.
SPECS: Verstärkter Polymer, Schwarz. 6¼" (15.9cm) lang mit eingefahrenen Beinen. 8½" (21.6cm) hoch mit ausgefahrenen Beinen. 13⁄8" (3.5cm) Durchmesser. GPS-02 – Stahleinsätze in den Beinen. 7.8 oz. (220g) Gewicht.
Mehr...
Kundenbewertungen zu GPS, LLC. Military Model Grip Pod Picatinny Mount 7-9" Black
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
GPS-02 works!(14.08.2009)
This is one handy piece of gear!
GPS-02 Grip Pod(22.09.2009)
The Grip Pod made handling my AR15 easy and the legs make a great platform for prone shooting. I am very satisfied with this product.
Versatility is welcome(19.11.2009)
It's great to have both a vertical foregrip and a bipod all in one. I use the foregrip all the time, and every once in a while need a bipod. It's great that I can make a quick decision, press a button, and suddenly I've got a bipod. I really appreciate that aspect.
One thing I don't like is the thickness of the grip at the attachment point. It's thick and blocky and has to be to manage the bipod deployment button and mechanisms. But sometimes you go to grip it and your hand grabs right under your rail (it's an index point)... which is right on the blocky part at the top. It's not very comfortable and you end up readjusting your grip. It's a minor point, but it is still one thing about the grip that annoys me.
Marine combat tested(30.08.2010)
This was issued to me in 2007 for use in Iraq with my M4. It is very tough and durable. I also liked the fact that the sides have a small flat surface which I used to mount the pressure switch to my tac-light. I have been trying to find a place to purchase one and never thought to look here! This grip is so much better than the other bipod grips out there.
Jack of all trades(20.01.2011)
The grip is a little long, and the bi pod don't pivot, but its lighter and easier to use than having both mounted separately. its strong enough for an m4, but if its on a saw don't drop it thinking the legs can take it.
GRIPOD Systems(30.03.2011)
Awesome piece of gear, works great and is extremely durable. Highly recommended it for anyone interested in purchasing any type of vert grip.
Artikel-Nr.: 100003226 GPS, LLC. Military Model Grip Pod Picatinny Mount 7-9" Black Herstellerproduktnummer: GPS02793573223159 Dieser zweifunktionale vertikale Griff sichert am unteren Zubehörschienen deines taktischen Gewehrs Vorderende und bietet dir verbesserte Kontrolle im Nahkampf sowie eine stabile Zweibeinstütze für präzises Schießen auf große Entfernungen. Die handausfüllenden Konturen und tiefen Rillen des Griffs bieten selbst bei nassen Händen einen festen Halt. Drücke den großen, tief gerillten Auslöseknopf, und eine kräftige Feder fährt die Beine sofort aus. Der für die Daumenaktivierung günstig platzierte Knopf liegt bündig mit der umgebenden Oberfläche, um ein versehentliches Ausfahren zu verhindern. Ausgefahrene Beine bieten ausreichend Erhöhung, damit ein Standardmagazin mit 30 Patronen den Boden nicht berührt, und verfangen sich nicht in Gestrüpp, Fahrzeuginnerem oder anderer Ausrüstung, wenn sie eingefahren sind. Beine und Griff bestehen aus robustem, spritzgegossenem Polymer; Stahlquerbolzen mit griffiger Daumenschraube verriegelt direkt an jeder MIL-STD 1913 Picatinny-Schiene für eine steinfeste Befestigung. GPS-02 hat Stahleinsätze in den Beinen für maximale Stärke bei hochbelastenden taktischen Operationen.
217.9EUR54217,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Vertical Forend Grip With Built-In Quick-Deploy Bipod
Dual-function vertical grip locks to the bottom accessory rail of your tactical rifle’s forend to give you enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. GPS-02 has steel inserts in legs for maximum strength in high-stress tactical operations.
SPECS: Reinforced polymer, Black. 6¼" (15.9cm) long with legs retracted. 8½" (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. GPS-02 – Steel inserts in legs. 7.8 oz. (220g) weight.
Mehr...
Vertikaler Vordergriff mit integriertem Schnellauslöse-Zweibein
Dieser zweifunktionale vertikale Griff sichert am unteren Zubehörschienen deines taktischen Gewehrs Vorderende und bietet dir verbesserte Kontrolle im Nahkampf sowie eine stabile Zweibeinstütze für präzises Schießen auf große Entfernungen. Die handausfüllenden Konturen und tiefen Rillen des Griffs bieten selbst bei nassen Händen einen festen Halt. Drücke den großen, tief gerillten Auslöseknopf, und eine kräftige Feder fährt die Beine sofort aus. Der für die Daumenaktivierung günstig platzierte Knopf liegt bündig mit der umgebenden Oberfläche, um ein versehentliches Ausfahren zu verhindern. Ausgefahrene Beine bieten ausreichend Erhöhung, damit ein Standardmagazin mit 30 Patronen den Boden nicht berührt, und verfangen sich nicht in Gestrüpp, Fahrzeuginnerem oder anderer Ausrüstung, wenn sie eingefahren sind. Beine und Griff bestehen aus robustem, spritzgegossenem Polymer; Stahlquerbolzen mit griffiger Daumenschraube verriegelt direkt an jeder MIL-STD 1913 Picatinny-Schiene für eine steinfeste Befestigung. GPS-02 hat Stahleinsätze in den Beinen für maximale Stärke bei hochbelastenden taktischen Operationen.
SPECS: Verstärkter Polymer, Schwarz. 6¼" (15.9cm) lang mit eingefahrenen Beinen. 8½" (21.6cm) hoch mit ausgefahrenen Beinen. 13⁄8" (3.5cm) Durchmesser. GPS-02 – Stahleinsätze in den Beinen. 7.8 oz. (220g) Gewicht.
Mehr...
Kundenbewertungen zu GPS, LLC. Military Model Grip Pod Picatinny Mount 7-9" Black
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
GPS-02 works!(14.08.2009)
This is one handy piece of gear!
GPS-02 Grip Pod(22.09.2009)
The Grip Pod made handling my AR15 easy and the legs make a great platform for prone shooting. I am very satisfied with this product.
Versatility is welcome(19.11.2009)
It's great to have both a vertical foregrip and a bipod all in one. I use the foregrip all the time, and every once in a while need a bipod. It's great that I can make a quick decision, press a button, and suddenly I've got a bipod. I really appreciate that aspect.
One thing I don't like is the thickness of the grip at the attachment point. It's thick and blocky and has to be to manage the bipod deployment button and mechanisms. But sometimes you go to grip it and your hand grabs right under your rail (it's an index point)... which is right on the blocky part at the top. It's not very comfortable and you end up readjusting your grip. It's a minor point, but it is still one thing about the grip that annoys me.
Marine combat tested(30.08.2010)
This was issued to me in 2007 for use in Iraq with my M4. It is very tough and durable. I also liked the fact that the sides have a small flat surface which I used to mount the pressure switch to my tac-light. I have been trying to find a place to purchase one and never thought to look here! This grip is so much better than the other bipod grips out there.
Jack of all trades(20.01.2011)
The grip is a little long, and the bi pod don't pivot, but its lighter and easier to use than having both mounted separately. its strong enough for an m4, but if its on a saw don't drop it thinking the legs can take it.
GRIPOD Systems(30.03.2011)
Awesome piece of gear, works great and is extremely durable. Highly recommended it for anyone interested in purchasing any type of vert grip.