The GG&G M1A Scout Scope Mount is perfect for setting up your rifle with a red dot scope or long eye relief magnified scope. It easily installs in the cutout of the upper factory handguard. We cut a large channel in the rail so that the iron sights could be used with the scope in place. Check out all of the specifications below. Specifically designed for the M1A “Scout Squad” or “SOCOM 16“, with cutout factory top handguard. Easy installation. Low profile design. No modifications to your weapon are required. Center channel reduces weight and allows for the use of the factory iron sights. Clamps to the barrel for maximum stability and accuracy with 8 clamping screws vs. the factory 6 screws. Provides 7 inches of MIL-STD 1913 “Picatinny” rail. Extends rearward to the front of the receiver for mounting “Scout“ style scopes.
SPECS: Machined from 6061-T6 Billet. Type III Hard Coat Anodized. Weighs: 6.8 oz.. Made in America.
Mehr...
Die GG&G M1A Scout Scope Mount ist ideal, um dein Gewehr mit einem Rotpunktvisier oder einem Zielfernrohr mit langem Augenabstand auszustatten. Sie lässt sich leicht in den Ausschnitt des oberen Werks-Handschutzes einbauen. Wir haben eine große Aussparung in die Schiene geschnitten, damit die Eisenvisierung auch bei montiertem Zielfernrohr benutzt werden kann. Unten findest du alle Spezifikationen. Speziell entworfen für das M1A 'Scout Squad' oder 'SOCOM 16', mit Ausschnitt im oberen Werks-Handschutz. Einfache Installation. Niedriges Profil. Keine Modifikationen an deiner Waffe erforderlich. Zentraler Kanal reduziert Gewicht und ermöglicht die Nutzung der Werks-Eisenvisierung. Klemmt am Lauf für maximale Stabilität und Genauigkeit mit 8 Klemmschrauben im Vergleich zu den Werks-6 Schrauben. Bietet 7 Zoll MIL-STD 1913 'Picatinny' Schiene. Erstreckt sich nach hinten bis zum Anfang des Empfängers, um 'Scout' Stil Zielfernrohre zu montieren.
SPECS: Aus 6061-T6 Billet gefertigt. Typ III Hartbeschichtung. Gewicht: 6,8 oz. Hergestellt in Amerika.
Mehr...
Kundenbewertungen zu GG&G, INC. M1A Scout Scope Mount
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 3
Doesn't fit every m1a(06.03.2015)
Mount looks to be well constructed, but will not fit the aftermarket barrel on my gun. Would love it if it did, but I'll have send it back. Gave 3 stars because there was no NA rating.
Artikel-Nr.: 336000051 GG&G, INC. M1A Scout Scope Mount Herstellerproduktnummer: GGG1683813157005954 Die GG&G M1A Scout Scope Mount ist ideal, um dein Gewehr mit einem Rotpunktvisier oder einem Zielfernrohr mit langem Augenabstand auszustatten. Sie lässt sich leicht in den Ausschnitt des oberen Werks-Handschutzes einbauen. Wir haben eine große Aussparung in die Schiene geschnitten, damit die Eisenvisierung auch bei montiertem Zielfernrohr benutzt werden kann. Unten findest du alle Spezifikationen. Speziell entworfen für das M1A 'Scout Squad' oder 'SOCOM 16', mit Ausschnitt im oberen Werks-Handschutz. Einfache Installation. Niedriges Profil. Keine Modifikationen an deiner Waffe erforderlich. Zentraler Kanal reduziert Gewicht und ermöglicht die Nutzung der Werks-Eisenvisierung. Klemmt am Lauf für maximale Stabilität und Genauigkeit mit 8 Klemmschrauben im Vergleich zu den Werks-6 Schrauben. Bietet 7 Zoll MIL-STD 1913 'Picatinny' Schiene. Erstreckt sich nach hinten bis zum Anfang des Empfängers, um 'Scout' Stil Zielfernrohre zu montieren.
The GG&G M1A Scout Scope Mount is perfect for setting up your rifle with a red dot scope or long eye relief magnified scope. It easily installs in the cutout of the upper factory handguard. We cut a large channel in the rail so that the iron sights could be used with the scope in place. Check out all of the specifications below. Specifically designed for the M1A “Scout Squad” or “SOCOM 16“, with cutout factory top handguard. Easy installation. Low profile design. No modifications to your weapon are required. Center channel reduces weight and allows for the use of the factory iron sights. Clamps to the barrel for maximum stability and accuracy with 8 clamping screws vs. the factory 6 screws. Provides 7 inches of MIL-STD 1913 “Picatinny” rail. Extends rearward to the front of the receiver for mounting “Scout“ style scopes.
SPECS: Machined from 6061-T6 Billet. Type III Hard Coat Anodized. Weighs: 6.8 oz.. Made in America.
Mehr...
Die GG&G M1A Scout Scope Mount ist ideal, um dein Gewehr mit einem Rotpunktvisier oder einem Zielfernrohr mit langem Augenabstand auszustatten. Sie lässt sich leicht in den Ausschnitt des oberen Werks-Handschutzes einbauen. Wir haben eine große Aussparung in die Schiene geschnitten, damit die Eisenvisierung auch bei montiertem Zielfernrohr benutzt werden kann. Unten findest du alle Spezifikationen. Speziell entworfen für das M1A 'Scout Squad' oder 'SOCOM 16', mit Ausschnitt im oberen Werks-Handschutz. Einfache Installation. Niedriges Profil. Keine Modifikationen an deiner Waffe erforderlich. Zentraler Kanal reduziert Gewicht und ermöglicht die Nutzung der Werks-Eisenvisierung. Klemmt am Lauf für maximale Stabilität und Genauigkeit mit 8 Klemmschrauben im Vergleich zu den Werks-6 Schrauben. Bietet 7 Zoll MIL-STD 1913 'Picatinny' Schiene. Erstreckt sich nach hinten bis zum Anfang des Empfängers, um 'Scout' Stil Zielfernrohre zu montieren.
SPECS: Aus 6061-T6 Billet gefertigt. Typ III Hartbeschichtung. Gewicht: 6,8 oz. Hergestellt in Amerika.
Mehr...
Kundenbewertungen zu GG&G, INC. M1A Scout Scope Mount
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 3
Doesn't fit every m1a(06.03.2015)
Mount looks to be well constructed, but will not fit the aftermarket barrel on my gun. Would love it if it did, but I'll have send it back. Gave 3 stars because there was no NA rating.