M1 Garand muzzle mounted cleaning rod guide friction fits on the muzzle for correct alignment of the cleaning rod with the bore. Internal chamber allows for reversal of bore brush or jag without removing the guide. Fits up to 30 caliber rods such as the Dewey coated rods. Works for all calibers. Our guide includes a solvent port for ease of use.Just slip the rod guide over your cleaning rod, then install your jag or brush on the rod prior to placing the Muzzle Buddy on the barrel. Protect that properly crowned muzzle with the hew Muzzle Buddy. The M1 Buddy Combo contains the M1 Buddy and M1 Muzzle Buddy.
Mehr...
Der M1 Garand Mündungsaufsatz-Reinigungsstabführer passt sich durch Reibung an der Mündung an und ermöglicht eine korrekte Ausrichtung des Reinigungsstabs mit dem Lauf. Die innere Kammer erlaubt das Umkehren der Bürste oder des Jags ohne Entfernung des Führers. Geeignet für bis zu 30 Kaliber Stäbe, wie die beschichteten Stäbe von Dewey. Funktioniert für alle Kaliber. Unser Führer beinhaltet einen Lösungsmittelanschluss für eine einfache Nutzung. Einfach den Stabführer über deinen Reinigungsstab schieben, dann deinen Jag oder Bürste am Stab anbringen, bevor du den Muzzle Buddy auf den Lauf setzt. Schütze deine korrekt abgerundete Mündung mit dem neuen Muzzle Buddy. Das M1 Buddy Combo enthält den M1 Buddy und M1 Muzzle Buddy.
Mehr...
Kundenbewertungen zu TK PRODUCTS, INC. M1 Muzzle Buddy
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 3,4
Avoid....Doesn't Fit M1 Garand as stated(04.09.2018)
Doesn't fit on the end of the muzzle AND a standard .30 cal jag/patch won't fit through the inner diameter of the guide. Receiver end piece won't stay in place with the bolt closed. AVOID, and buy the Sinclair muzzle guide/bore guide instead.
It works, well kind of works.(29.05.2012)
This product is supposed to snap in, it does not. It loosely sits in place as long as you do not tip the rifle. It is molded to the shape of the action but has at least 1/16" between its edges and the action's surfaces. If you want this to work the best bet I can think of would be to apply grease or wax to the receiver and then use RTV sealant on the M1 Buddy to make the fit what it should be.
Does What It's Supposed To Do!(22.12.2012)
I used this in both my M1-A's and M1 Garand and in both types of weapons it worked just fine. With the Garand you have to push down on the device while pushing forward on the op rod. With the M1A you just lock the bolt back, set the device in the receiver opening, and gently let the bolt go forward.
This thing is GREAT!(09.08.2013)
I have used it in my Garands and my M1A. The bolt holds it in place.
Worthless if you have a scope mount!(23.08.2013)
It appears to be a great idea....IF one does NOT have a scope mounted. This will NOT fit under my SEI mount.I have tried everything short of forcing it in. Oh Well...Back to a rag jammed in the mag well.
M 1 Buddy Thumbs up(08.10.2014)
No cons on this. I need a quick wipe down the barrel so I bought this Buddy and it works keep it in your box....
Artikel-Nr.: 100015393 TK PRODUCTS, INC. M1 Muzzle Buddy Herstellerproduktnummer: M1MZBUDDY Der M1 Garand Mündungsaufsatz-Reinigungsstabführer passt sich durch Reibung an der Mündung an und ermöglicht eine korrekte Ausrichtung des Reinigungsstabs mit dem Lauf. Die innere Kammer erlaubt das Umkehren der Bürste oder des Jags ohne Entfernung des Führers. Geeignet für bis zu 30 Kaliber Stäbe, wie die beschichteten Stäbe von Dewey. Funktioniert für alle Kaliber. Unser Führer beinhaltet einen Lösungsmittelanschluss für eine einfache Nutzung. Einfach den Stabführer über deinen Reinigungsstab schieben, dann deinen Jag oder Bürste am Stab anbringen, bevor du den Muzzle Buddy auf den Lauf setzt. Schütze deine korrekt abgerundete Mündung mit dem neuen Muzzle Buddy. Das M1 Buddy Combo enthält den M1 Buddy und M1 Muzzle Buddy.
Hersteller/Modell:
Springfield
Modell:
M1
Versandgewicht: 0,091kgVersandhöhe: 25mmVersandbreite: 107mmVersandlänge: 171mm
Artikeldetails
Made in USA
Artikel-Nr.: 100007592 TK PRODUCTS, INC. M1 BUDDY Herstellerproduktnummer: M1BUDDY Der M1 Garand Mündungsaufsatz-Reinigungsstabführer passt sich durch Reibung an der Mündung an und ermöglicht eine korrekte Ausrichtung des Reinigungsstabs mit dem Lauf. Die innere Kammer erlaubt das Umkehren der Bürste oder des Jags ohne Entfernung des Führers. Geeignet für bis zu 30 Kaliber Stäbe, wie die beschichteten Stäbe von Dewey. Funktioniert für alle Kaliber. Unser Führer beinhaltet einen Lösungsmittelanschluss für eine einfache Nutzung. Einfach den Stabführer über deinen Reinigungsstab schieben, dann deinen Jag oder Bürste am Stab anbringen, bevor du den Muzzle Buddy auf den Lauf setzt. Schütze deine korrekt abgerundete Mündung mit dem neuen Muzzle Buddy. Das M1 Buddy Combo enthält den M1 Buddy und M1 Muzzle Buddy.
22.9EUR022,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Artikel-Nr.: 100015394 TK PRODUCTS, INC. M1 Buddy Combo Herstellerproduktnummer: M1COMBO Der M1 Garand Mündungsaufsatz-Reinigungsstabführer passt sich durch Reibung an der Mündung an und ermöglicht eine korrekte Ausrichtung des Reinigungsstabs mit dem Lauf. Die innere Kammer erlaubt das Umkehren der Bürste oder des Jags ohne Entfernung des Führers. Geeignet für bis zu 30 Kaliber Stäbe, wie die beschichteten Stäbe von Dewey. Funktioniert für alle Kaliber. Unser Führer beinhaltet einen Lösungsmittelanschluss für eine einfache Nutzung. Einfach den Stabführer über deinen Reinigungsstab schieben, dann deinen Jag oder Bürste am Stab anbringen, bevor du den Muzzle Buddy auf den Lauf setzt. Schütze deine korrekt abgerundete Mündung mit dem neuen Muzzle Buddy. Das M1 Buddy Combo enthält den M1 Buddy und M1 Muzzle Buddy.
45.9EUR045,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
M1 Garand muzzle mounted cleaning rod guide friction fits on the muzzle for correct alignment of the cleaning rod with the bore. Internal chamber allows for reversal of bore brush or jag without removing the guide. Fits up to 30 caliber rods such as the Dewey coated rods. Works for all calibers. Our guide includes a solvent port for ease of use.Just slip the rod guide over your cleaning rod, then install your jag or brush on the rod prior to placing the Muzzle Buddy on the barrel. Protect that properly crowned muzzle with the hew Muzzle Buddy. The M1 Buddy Combo contains the M1 Buddy and M1 Muzzle Buddy.
Mehr...
Der M1 Garand Mündungsaufsatz-Reinigungsstabführer passt sich durch Reibung an der Mündung an und ermöglicht eine korrekte Ausrichtung des Reinigungsstabs mit dem Lauf. Die innere Kammer erlaubt das Umkehren der Bürste oder des Jags ohne Entfernung des Führers. Geeignet für bis zu 30 Kaliber Stäbe, wie die beschichteten Stäbe von Dewey. Funktioniert für alle Kaliber. Unser Führer beinhaltet einen Lösungsmittelanschluss für eine einfache Nutzung. Einfach den Stabführer über deinen Reinigungsstab schieben, dann deinen Jag oder Bürste am Stab anbringen, bevor du den Muzzle Buddy auf den Lauf setzt. Schütze deine korrekt abgerundete Mündung mit dem neuen Muzzle Buddy. Das M1 Buddy Combo enthält den M1 Buddy und M1 Muzzle Buddy.
Mehr...
Kundenbewertungen zu TK PRODUCTS, INC. M1 Muzzle Buddy
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 3,4
Avoid....Doesn't Fit M1 Garand as stated(04.09.2018)
Doesn't fit on the end of the muzzle AND a standard .30 cal jag/patch won't fit through the inner diameter of the guide. Receiver end piece won't stay in place with the bolt closed. AVOID, and buy the Sinclair muzzle guide/bore guide instead.
It works, well kind of works.(29.05.2012)
This product is supposed to snap in, it does not. It loosely sits in place as long as you do not tip the rifle. It is molded to the shape of the action but has at least 1/16" between its edges and the action's surfaces. If you want this to work the best bet I can think of would be to apply grease or wax to the receiver and then use RTV sealant on the M1 Buddy to make the fit what it should be.
Does What It's Supposed To Do!(22.12.2012)
I used this in both my M1-A's and M1 Garand and in both types of weapons it worked just fine. With the Garand you have to push down on the device while pushing forward on the op rod. With the M1A you just lock the bolt back, set the device in the receiver opening, and gently let the bolt go forward.
This thing is GREAT!(09.08.2013)
I have used it in my Garands and my M1A. The bolt holds it in place.
Worthless if you have a scope mount!(23.08.2013)
It appears to be a great idea....IF one does NOT have a scope mounted. This will NOT fit under my SEI mount.I have tried everything short of forcing it in. Oh Well...Back to a rag jammed in the mag well.
M 1 Buddy Thumbs up(08.10.2014)
No cons on this. I need a quick wipe down the barrel so I bought this Buddy and it works keep it in your box....