Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

KE ARMS
KP-9 STRIPPED LOWER RECEIVER POLYMER

100042875
The KP-9 is a monolithic polymer 9mm Glock Mag Compatible AR15 style receiver made from injection molded 30% glass filled nylon incorporating the buttstock, buffer tube, pistol grip, and trigger guard into the receiver design as integral components.   This manufacturing process offers several advantages Lighter weight compared to similarly configured receivers Lower cost to similarly configured receivers Increased production speed and elimination of sub components through integration; especially important during high demand cycles in the market. Features Include: Compatibility with most common 9mm AR15 uppers and lower parts kits Compatible with Glock 17 and 19 Magazines Flared magwell to make reloads under stress easier to perform. A1 Length 13” Length of Pull (LOP) Buttstock to fit a wide range of shooters MLOK Slots at rear of stock for sling attachement points or run a strap through it for simple sling attachment Holes at the front of the stock for QD socket inserts for more sling attachment options Improved grip for comfortable use “Winter” Trigger Guard Stripped Lowers Include: Pivot and Take Down Pins KP-9 Selector Detent Buttplate 5/64" Roll Pin to Retain Buffer Detent Ambi Glock Magazine Catch Assembly Adjustable 9mm Steel Ejector Technical Information The KP-9 receiver uses a Carbine buffer and spring. Do NOT use anything other than standard 9mm carbine buffers and round springs or the JP SCSS in the KP-9. The Take Down and Pivot Pins have the detents built into them; eliminating the spring and detent holes in the lower increases durability. The buffer detent (should you choose to use it) is held in place with a 5/64” Roll Pin The KP-9 is compatible with all Mil-Spec Fire Control Groups The KP-9 is compatible with cassette style match triggers including the KE Arms SLT units. The retention system of these triggers with D-Clips in the bushings to retain the fire control pins makes them better suited for use in the KP-9 than other designs that require captured pins.* The hammer pin area is wider for durability; Standard AR15 hammer pins can still be used but we offer a longer hammer pin for customers preferring a flush pin for aesthetic reasons. Safety selector spring and detent load from the top and then the selector is slid over them.  Standard selectors can work but removing them can be particularly difficult.   We recommend the use of our optimized mil-spec selector or optimized ambi selector to make removal easier.  Follow our assembly guide for further instructions. The KP-9 is compatible with 9mm blowback systems with a 5.4oz carbine buffer minimum.  Use heavier buffers as long as your gun can cycle reliably.  Failure to use this minimum buffer weight can damage the lower. CMMG Radial Delayed Blowback Uppers will need modifications to the ejector to work. Cerakoting: If you intend to have your KP-9 Cerakoted we recommend you use We Plead the 2nd as they are experienced in coating polymer receivers and have our authorization. The bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping. Last Round Bolt Hold Open Last Bolt Hold Open Functon is dependent upon the upper you use. The standard bolt catch does not interface with the Glock Magazine follower. Some uppers such as those from Gibbz Arms and New Frontier Armory have linkage systems that interface with the Glock magazine followers and extend back to the bolt catch. Without one of these uppers, the bolt catch can still be manually actuated to verify a clear firearm or make inserting a magazine with high tension easier.  
312.9 312.9 1 EUR
Artikel-Nr.: 100042875
KE ARMS KP-9 STRIPPED LOWER RECEIVER POLYMER BLACK
Herstellerproduktnummer: 01-61-03-001 Der KP-9 ist ein monolithischer Polymer 9mm Glock Mag kompatibler AR15-Stil Empfänger, hergestellt aus spritzgegossenem 30% glasfaserverstärktem Nylon, das Schaft, Pufferrohr, Pistolengriff und Abzugsbügel als integrale Bestandteile des Designs enthält. Dieser Herstellungsprozess bietet mehrere Vorteile: Geringeres Gewicht im Vergleich zu ähnlich konfigurierten Empfängern, niedrigere Kosten im Vergleich zu ähnlich konfigurierten Empfängern, erhöhte Produktionsgeschwindigkeit und Wegfall von Unterkomponenten durch Integration; besonders wichtig während hoher Nachfragezyklen im Markt. Zu den Funktionen gehören: Kompatibilität mit den meisten gängigen 9mm AR15 Ober- und Unterteilen, Kompatibilität mit Glock 17 und 19 Magazinen, erweiterte Magazinschacht, um Nachladungen unter Stress einfacher zu machen. A1 Länge 13” Länge des Schafts (LOP) passt für eine breite Palette von Schützen, MLOK-Schlitze am hinteren Ende des Schafts für Riemenbefestigungspunkte oder Durchführen eines Riemens für eine einfache Riemenbefestigung, Löcher an der Vorderseite des Schafts für QD-Sockeleinsätze für weitere Riemenbefestigungsoptionen, Verbesserter Griff für komfortable Nutzung, "Winter" Abzugsbügel, Unmontierte Lower enthalten: Pivot- und Take Down-Pins, KP-9 Selektor-Detent, Schaftplatte, 5/64" Rollstift zur Sicherung des Puffer-Detents, Ambi Glock Magazinauslöser-Assembly, Einstellbarer 9mm Stahl-Auswerfer, Technische Informationen Der KP-9 Empfänger verwendet ein Carbine Puffer und Feder. Verwenden Sie NICHTS anderes als standardmäßige 9mm Carbine Puffer und runde Federn oder das JP SCSS im KP-9. Die Take Down und Pivot Pins haben die Detents integriert; das Eliminieren der Feder und Detent-Löcher im unteren Teil erhöht die Haltbarkeit. Der Puffer-Detent (falls verwendet) wird mit einem 5/64” Rollstift gehalten. Der KP-9 ist kompatibel mit allen Mil-Spec Feuerkontrollgruppen. Der KP-9 ist kompatibel mit Kassettenstil-Matchabzügen, einschließlich der KE Arms SLT-Einheiten. Das Retentionssystem dieser Abzüge mit D-Clips in den Buchsen zur Sicherung der Feuerkontrollstifte macht sie besser geeignet für die Verwendung im KP-9 als andere Designs, die eingefangene Stifte benötigen.* Der Bereich des Hammerstifts ist für Haltbarkeit breiter; Standard AR15 Hammerstifte können immer noch verwendet werden, aber wir bieten einen längeren Hammerstift für Kunden, die aus ästhetischen Gründen einen bündigen Stift bevorzugen. Feder und Detent des Sicherheitsauswählers werden von oben geladen und dann wird der Auswähler darüber geschoben. Standardauswähler können funktionieren, aber deren Entfernung kann besonders schwierig sein. Wir empfehlen die Verwendung unseres optimierten Mil-Spec-Auswählers oder optimierten Ambi-Auswählers, um die Entfernung zu erleichtern. Folgen Sie unserer Montageanleitung für weitere Anweisungen. Der KP-9 ist kompatibel mit 9mm Blowback-Systemen mit einem Minimum von 5,4oz Carbine Puffer. Verwenden Sie schwerere Puffer, solange Ihre Waffe zuverlässig zyklisch arbeiten kann. Die Verwendung eines unter diesem Mindestgewicht liegenden Puffers kann den unteren Teil beschädigen. CMMG Radialverzögerte Blowback-Oberseiten benötigen Modifikationen am Auswerfer, um zu funktionieren. Cerakoting: Wenn Sie vorhaben, Ihren KP-9 Cerakoten zu lassen, empfehlen wir Ihnen We Plead the 2nd, da sie Erfahrung in der Beschichtung von Polymerempfängern haben und unsere Autorisierung besitzen. Das Backen sollte bei niedrigen Temperaturen (<190 Grad F) und mit einem oberen Teil erfolgen, um Verformungen zu verhindern. Letzte Runde Verschluss Halten Offen Die Funktion des letzten Verschlusshalts ist abhängig von dem Oberen, das Sie verwenden. Der Standard-Verschlusshalter interagiert nicht mit dem Glock-Magazinfollower. Einige Oberteile, wie die von Gibbz Arms und New Frontier Armory, haben Verbindungssysteme, die mit den Glock-Magazinfollowern interagieren und sich zurück zum Verschlusshalter erstrecken. Ohne eines dieser Oberteile kann der Verschlusshalter immer noch manuell betätigt werden, um eine leere Waffe zu überprüfen oder das Einführen eines Magazins mit hoher Spannung zu erleichtern.
312.9 EUR 0 312,90 € *
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht auf Lager. Kein Liefertermin bekannt.
Eigenschaften: Action Type: Semi-Auto Farbe: Black Finish: Matte Patrone: 9 mm Luger

Kaufbeschränkungen

  • Abgabe nur an Inhaber einer Erwerbserlaubnis.

Eigenschaften

Action Type: Semi-Auto Farbe: Black Finish: Matte Patrone: 9 mm Luger Versandgewicht: 0,726kg Versandhöhe: 48mm Versandbreite: 231mm Versandlänge: 538mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.e



The KP-9 is a monolithic polymer 9mm Glock Mag Compatible AR15 style receiver made from injection molded 30% glass filled nylon incorporating the buttstock, buffer tube, pistol grip, and trigger guard into the receiver design as integral components.   This manufacturing process offers several advantages Lighter weight compared to similarly configured receivers Lower cost to similarly configured receivers Increased production speed and elimination of sub components through integration; especially important during high demand cycles in the market. Features Include: Compatibility with most common 9mm AR15 uppers and lower parts kits Compatible with Glock 17 and 19 Magazines Flared magwell to make reloads under stress easier to perform. A1 Length 13” Length of Pull (LOP) Buttstock to fit a wide range of shooters MLOK Slots at rear of stock for sling attachement points or run a strap through it for simple sling attachment Holes at the front of the stock for QD socket inserts for more sling attachment options Improved grip for comfortable use “Winter” Trigger Guard Stripped Lowers Include: Pivot and Take Down Pins KP-9 Selector Detent Buttplate 5/64" Roll Pin to Retain Buffer Detent Ambi Glock Magazine Catch Assembly Adjustable 9mm Steel Ejector Technical Information The KP-9 receiver uses a Carbine buffer and spring. Do NOT use anything other than standard 9mm carbine buffers and round springs or the JP SCSS in the KP-9. The Take Down and Pivot Pins have the detents built into them; eliminating the spring and detent holes in the lower increases durability. The buffer detent (should you choose to use it) is held in place with a 5/64” Roll Pin The KP-9 is compatible with all Mil-Spec Fire Control Groups The KP-9 is compatible with cassette style match triggers including the KE Arms SLT units. The retention system of these triggers with D-Clips in the bushings to retain the fire control pins makes them better suited for use in the KP-9 than other designs that require captured pins.* The hammer pin area is wider for durability; Standard AR15 hammer pins can still be used but we offer a longer hammer pin for customers preferring a flush pin for aesthetic reasons. Safety selector spring and detent load from the top and then the selector is slid over them.  Standard selectors can work but removing them can be particularly difficult.   We recommend the use of our optimized mil-spec selector or optimized ambi selector to make removal easier.  Follow our assembly guide for further instructions. The KP-9 is compatible with 9mm blowback systems with a 5.4oz carbine buffer minimum.  Use heavier buffers as long as your gun can cycle reliably.  Failure to use this minimum buffer weight can damage the lower. CMMG Radial Delayed Blowback Uppers will need modifications to the ejector to work. Cerakoting: If you intend to have your KP-9 Cerakoted we recommend you use We Plead the 2nd as they are experienced in coating polymer receivers and have our authorization. The bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping. Last Round Bolt Hold Open Last Bolt Hold Open Functon is dependent upon the upper you use. The standard bolt catch does not interface with the Glock Magazine follower. Some uppers such as those from Gibbz Arms and New Frontier Armory have linkage systems that interface with the Glock magazine followers and extend back to the bolt catch. Without one of these uppers, the bolt catch can still be manually actuated to verify a clear firearm or make inserting a magazine with high tension easier.  
Newsletter