Ihr Warenkorb ist leer.

Warenkorb

APEX TACTICAL SPECIALTIES INC
J-FRAME DUTY/CARRY KIT

856008005260 100007219

Installation of this kit reduces trigger pull weight of your centerfire J-frame Smith & Wesson revolver from over 12 lbs to 9 lbs Kit contains a new rebound slide spring, main spring, and an Apex XP firing pin kit Installation requires no fitting or modification to the factory springs or parts Just remove the factory parts and install the j-frame duty/carry kit Works with all modern centerfire J-frame revolvers with the frame mounted firing pin

Mehr...

Die Installation dieses Kits reduziert das Abzugsgewicht deiner zentralfeuerbetriebenen J-Frame Smith & Wesson Revolver von über 12 lbs auf 9 lbs. Das Kit enthält eine neue Rückholfeder, Hauptfeder und ein Apex XP Schlagbolzen-Kit. Die Installation erfordert keine Anpassung oder Modifikation der Werksfedern oder -teile. Einfach die Werkskomponenten entfernen und das J-Frame Duty/Carry Kit einbauen. Funktioniert mit allen modernen zentralfeuerbetriebenen J-Frame Revolvern mit im Rahmen montiertem Schlagbolzen

Mehr...

Kundenbewertungen zu APEX TACTICAL SPECIALTIES INC J-FRAME DUTY/CARRY KIT FOR S&W REVOLVERS

Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4,2

Decent (01.09.2011)

Installed easily into my well used 637. Reduced trigger pull a little bit but definitely not a night and day difference. Can't really go much lower though to insure reliable ignition of hard primers. The machined firing pin is a nice addition. Overall, you don't have to sacrifice much time or money to install this kit into your j-frame so it is worthwhile but I wouldn't call it a "must buy."

Does make it smoother (27.10.2011)

Installed it on my new wife's S&W 642CT, no much lighter but did make it smoother. Do watch the video first and if you have one of the S&W trigger spring tools, makes life much easier. I have one and took maybe 20 mins for the total install. Have a S&W 637 with Wolf springs and plan to swap out for Apex J kit.

Apex Tactical J-Frame Spring Kit (02.12.2011)

I purchased this as a hopeful fix for my wife's Airweight J-Frame. She was complaining that the factory trigger was too heavy and hurt her finger when she shot. Had to dress the end of one of the springs as it did not have the flat pressed end - was just clipped off, but this was easily fixed in 15 seconds with a torch and pliers. There was a significant and improved difference in trigger weight, and cycling the action is much faster on repetitive shots. I would like to see a lighter version, possibly 5-7 pound kit, as this firearm does not have a safety device that is spring reliant. In all, great kit. I just ordered another two: one for mine, and one for a friend that is becoming envious...

Excellent Upgrade (07.12.2011)

Have installed a half dozen or so of these to date. About to order 3 more. Customers are astounded at the difference it makes. Easy install and huge improvement.

Easy installation w/ great results (22.01.2012)

I purchased this kit for a new S&W 60 based on reviews from other users. Following the company's instructional videos on YouTube, I was able to easily do the installation by myself and avoided mistakes that I would have otherwise made. I'm very pleased with the lighter pull and highly recommend the product to all. It was well worth the money!

Excellent Kit for the money (04.07.2012)

Have installed many of these kits on customer revolvers. I have not had anyone yet that wasn't estatic over the improvement. Very smooth action afterwards. I have had to lightly polish a couple of the firing pins but other than that.... perfect installations.

Amazing difference! (06.03.2014)

Amazing difference in trigger pull weight and smoothness. Didn't measure with a trigger scale, but a very noticeable change. Watch their video, use the right tools, and it is very easy to swap out. Take the time to polish the rebound slide back and bottom while its out, as well. Compared my gun with springs to an identical 637 without and the difference is amazing. Student in my CCW class could not easily nor accurately pull double action with her 637 but she was able to fire mine very accurately and quickly. She asked about the difference right away and for someone not experienced in firearms to comment speaks volumes. Excellent investment for the money!

S&W 638 Installation and Performance (26.07.2014)

In all honesty, I was a bit nervous about installing this kit, having never done any trigger work. APEX provided great videos as well as another Youtube video from Terry G titled "S&W Airweight Trigger Job: "The Yoda G Mod". I used APEX's videos for their kit, but I went a bit farther as the Yoda G Mod teaches how to completely dissassemble, remove the cylinder lock, what surfaces can use polishing and which ones not to touch. Replacing the springs is only 2/3 the job, in my opinion. Polishing most of the contact or "friction point" surfaces inside really make a huge difference also and are not hard- took me less than an hour to do the whole install, and that was using the two Apex Youtube videos and the Yoda video. Only issue I had was a small pin fell out in the area of the trigger guard upon complete dissasembly, and it was difficult from the video to tell excactly where that pin went. I found an exploded parts drawing on the internet and it saved the day. No left over parts. I would say double action pull, without using a gauge, decreased from a very hard 12-14 to a much more manageable 8 or so. Again this is subjective as I have no trigger pull gauge, but it is definitely much lighter. The 638 also has single action capability, and it seems to break about 2.5 - 3 lbs. Save yourself some money and buy the kit. A job like I did with the polishing and parts replacement would easily cost $150 or more. Just follow the instructions "exactly" as getting the side-plate off the way they describe is critical as is using the proper size screwdrivers. One tool they recommend for installing a spring, I didn't have, but it was no issue whatsoever. I am not a mechanic, by any means, but probably have average mechanical aptitude. If I can do this, you can do this. God Bless and have a great day!

.333 Batting Average (04.09.2016)

Bought the spring kit for my new S&W 442. I channeled my inner armorer since being out of the army for nearly 19 years. After installing the new springs, I went to the range to test it out. I had 4 misfires in the first box of 50 cartridges that I shot through it, and the trigger would not return on it's own after being shot. I talked to S&W, who gladly mailed me new OEM main and rebound springs after I unsuccessfully tried to find my originals. Looks like I will be developing a stronger trigger finger.

Lesen Sie 9 weitere Bewertungen bei brownells.com

53.9 53.9 1 EUR

Artikel-Nr.: 100007219
APEX TACTICAL SPECIALTIES INC J-FRAME DUTY/CARRY KIT FOR S&W REVOLVERS
Herstellerproduktnummer: 103-106 856008005260 Die Installation dieses Kits reduziert das Abzugsgewicht deiner zentralfeuerbetriebenen J-Frame Smith & Wesson Revolver von über 12 lbs auf 9 lbs. Das Kit enthält eine neue Rückholfeder, Hauptfeder und ein Apex XP Schlagbolzen-Kit. Die Installation erfordert keine Anpassung oder Modifikation der Werksfedern oder -teile. Einfach die Werkskomponenten entfernen und das J-Frame Duty/Carry Kit einbauen. Funktioniert mit allen modernen zentralfeuerbetriebenen J-Frame Revolvern mit im Rahmen montiertem Schlagbolzen

53.9 EUR 122 53,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Versandgewicht: 0,007kg Versandbreite: 83mm Versandlänge: 146mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x

Mehr...

Kundenbewertungen zu APEX TACTICAL SPECIALTIES INC J-FRAME DUTY/CARRY KIT FOR S&W REVOLVERS

Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4,2

Decent (01.09.2011)

Does make it smoother (27.10.2011)

Apex Tactical J-Frame Spring Kit (02.12.2011)

Excellent Upgrade (07.12.2011)

Have installed a half dozen or so of these to date. About to order 3 more. Customers are astounded at the difference it makes. Easy install and huge improvement.

Easy installation w/ great results (22.01.2012)

Excellent Kit for the money (04.07.2012)

Amazing difference! (06.03.2014)

S&W 638 Installation and Performance (26.07.2014)

.333 Batting Average (04.09.2016)

Lesen Sie 9 weitere Bewertungen bei brownells.com

Kunden kauften auch

L.E. WILSON, INC. 257 Weatherby Magnum FIRED Case Holder
L.E. WILSON, INC. RIFLE CASE HOLDERS

L.E. WILSON

Auf Lager

20,90 € * 20,90 € - 29,90 €*

Hülsenhalter für Trimmer | Hülsentrimmer

3,8

L.E. WILSON, INC. 44-40 Winchester Case Gage
L.E. WILSON, INC. WILSON CASE GAGE

L.E. WILSON

Bestellbar, nicht vorrätig

49,90 € * 42,90 € - 70,90 €*

Hülsenlehren & Verschlussabstandslehren

4,9

BROWNELLS Lead Remover Kit, 9mm/.38
BROWNELLS LEWIS LEAD REMOVER

BROWNELLS

Auf Lager

56,90 € * 12,90 € - 56,90 €*

Bleireiniger

4,4

SINCLAIR INTERNATIONAL Redding Die Lock Ring Pliers
SINCLAIR INTERNATIONAL SINCLAIR REDDING DIE LOCK RING PLIERS

SINCLAIR INTERNATIONAL

Auf Lager

19,90 € * 19,90 € - 50,90 €*

Ersatzteile und Aufrüstsets

3,8

KYNTEC CORPORATION AR-308 Shorty (2.5") Collapsible Stock Recoil Buffer
KYNTEC CORPORATION AR-15/M16/308 AR RECOIL BUFFER

KYNTEC CORPORATION

Auf Lager

213,90 € * 206,90 € - 247,90 €*

Rückstoßdämpfer

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.

Zahlungsarten

Preise inkl. MwSt., zzgl. Versand

Klassische Ansicht

Mobile Ansicht