Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Entdecke die perfekte Montage für dein Trijicon RMR Rotpunktvisier!
Die IVER JOHNSON 1911 TRIJICON RMR SIGHT MOUNT von EGW bietet dir eine zuverlässige und einfache Lösung, um dein Trijicon RMR Rotpunktvisier auf deiner Waffe zu montieren.
Produktdetails:
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Montagematerial: (2) 6-32 Flachschrauben, (1) 6-32 X 3/16 Set-Schraube
- Rotpunkt-Kompatibilität: Trijicon RMR, Holosun HS507C
Kompatibilität:
Diese Montage passt:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Diese Montage passt nicht:
Installation:
Um dein Trijicon RMR Rotpunktvisier zu montieren, entferne einfach die hintere Visierung deiner Waffe und ersetze sie durch unsere Montage. Es sind keine Änderungen an deiner Waffe erforderlich. Du kannst unsere Montage jederzeit abnehmen und deine hintere Visierung wieder anbringen. Montagematerial ist im Lieferumfang enthalten.
Installationsanleitung:
- Entferne die hintere Visierung*
- Installiere die EGW Sight Mount in der Dovetail
- Ziehe die Set-Schraube (falls zutreffend) fest
- Platziere das Rotpunktvisier auf der EGW Sight Mount (ein kleines Stück Papier zwischen dem Rotpunktvisier und der Montage erleichtert die Entfernung und schützt das Rotpunktvisier vor Loctite)
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf
- Ziehe die Montageschrauben auf 15in/lbs fest
Hinweis: Die mit dieser Montage gelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel für die Installation.