GBRS GROUP ASSAULTER BELT SYSTEM V3 The GBRS Group Assaulter Belt utilizes a 2-belt system to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters, and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi-rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load-rated, 1.75” AustriAlpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hooks should never be worn towards the body, especially in such a high-wear area (belt line). The inner belt system consists of a low profile “hook” inner belt with a single layer of 1.5” scuba webbing. This results in a system that doubles as a non-metallic EDC belt and is a comfortable and convenient way to cover the abrasive hook portion of the inner belt when flipped inside out. The single layer of scuba webbing allows for a rigid surface for IWB holsters to secure firmly. SPECS Outer Belt ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN* Webbing Type 13, 1-23/32” Inner Belt 3610 Low Profile Loop 1.5” HTH Extruded Hook 841 1.5” Scuba Webbing 1.5” Weight: Inner and Outer Belt Total Small: 12.9 oz. Medium: 13.8 oz. Large: 14.7 oz. X-Large: 16.8 oz. *BUCKLE DISCLAIMER: The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH Regulation) protects the environment against the harmful effects of chemical substances. 2023 changes to this regulation may or may not have visually affected the buckle on our V3 belt. This minimal visual difference does not affect the functionality of the belt. COMPATIBILITY: All MOLLE weave pouches/ products Holsters with belt loops (EX: Safariland® 6075UBL) True North Modular Holster Adapters SIZING: **Measure your waistline circumference for correct measurements, do not use pants size*** Size S fits waist sizes 27”-32” Ideal fit 27”-31” 17 MOLLE spaces Size M fits waist sizes 31”-36 “ Ideal fit 31”-34” 20 MOLLE spaces Size L fits waist sizes 35”-41” Ideal fit 35”-39” 23 MOLLE spaces Size XL fits waist sizes 40”-50” Ideal fit 40”-46” 26 MOLLE spaces
Entdecke das GBRS GROUP ASSAULTER BELT SYSTEM V3 für ultimativen Komfort und Flexibilität!
Das GBRS Group Assaulter Belt System V3 nutzt ein 2-Gürtel-System, um eine leichte, flexible, aber dennoch starre und stabile Plattform zu schaffen, auf der du Ausrüstung, Holster und Zubehör befestigen kannst. Dies wird durch die Verwendung von Type 13, 1-23/32” Gürtelgewebe (7000 lbs Zugfestigkeit) als Basis erreicht, ergänzt durch ein Feld aus PALS-Webbing, das aus einem semi-starren, gewebten Thermo-Polymer (Patent angemeldet) lasergeschnitten ist.
So bleibt deine Ausrüstung immer an etwas Festem befestigt, während der Gürtel leicht und bequem bleibt. Um das Ganze abzurunden, haben wir das Webbing doppelt mit einem „W“ genäht, um es mit einer lastbewerteten, 1.75” AustriAlpin Cobra Schnalle und einem D-Ring für die Befestigung von Helo-Lanyards und anderer Ausrüstung zu verbinden. Der äußere Gürtel hat eine innere Fläche aus „Schleifen“-Velcro, um sich an einem niedrigprofiligen „Haken“-Innergürtel zu befestigen. Wir haben dies so gestaltet, dass Haken niemals zur Körperseite getragen werden sollten, besonders in einem stark beanspruchten Bereich (Gürtelbereich).
Innerer Gürtel
Das Innengürtel-System besteht aus einem niedrigprofiligen „Haken“-Innergürtel mit einer einzelnen Schicht aus 1.5” Scuba-Webbing. Dies führt zu einem System, das auch als nicht-metallischer EDC-Gürtel dient und eine bequeme Möglichkeit bietet, den abrasiven Hakenbereich des Innengürtels beim Umstülpen abzudecken. Die einzelne Schicht aus Scuba-Webbing sorgt für eine starre Oberfläche, damit IWB-Holster sicher befestigt werden können.
SPEZIFIKATIONEN
- Äußerer Gürtel: ONE-WRAP® ¾”, Loop 1” & 1.5”, Binding ¾”, Tegris 12 Layer, AustriAlpin D-Ring COBRA® ProStyle Schnalle 1.75” 18kN*
- Innerer Gürtel: 3610 Low Profile Loop 1.5”, HTH Extruded Hook 841 1.5”, Scuba Webbing 1.5”
- Gewicht: Innerer und äußerer Gürtel zusammen: Klein: 12.9 oz, Mittel: 13.8 oz, Groß: 14.7 oz, X-Groß: 16.8 oz
*HINWEIS ZUR SCHNALLE: Die Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe (REACH-Verordnung) schützt die Umwelt vor den schädlichen Auswirkungen chemischer Substanzen. Änderungen an dieser Verordnung im Jahr 2023 können die Schnalle unseres V3-Gürtels visuell beeinflusst haben. Dieser minimale visuelle Unterschied hat jedoch keinen Einfluss auf die Funktionalität des Gürtels.
VERTRÄGLICHKEIT:
- Alle MOLLE-Web-Taschen/Produkte
- Holster mit Gürtelschlaufen (z.B. Safariland® 6075UBL)
- True North Modular Holster Adapter
GRÖßEN:
**Miss deinen Taillenumfang für die richtigen Maße, verwende nicht die Hosengröße***
- Größe S: passt für Taillengrößen 27”-32”, ideal 27”-31”, 17 MOLLE Plätze
- Größe M: passt für Taillengrößen 31”-36”, ideal 31”-34”, 20 MOLLE Plätze
- Größe L: passt für Taillengrößen 35”-41”, ideal 35”-39”, 23 MOLLE Plätze
- Größe XL: passt für Taillengrößen 40”-50”, ideal 40”-46”, 26 MOLLE Plätze