Flexible rubber body with spring-loaded, ABS plastic covers help seal out dirt, dust and moisture to keep the lens surfaces of your EOTech holographic sight clean, scratch-free, and ready for use in all shooting conditions. Tabs on the right and left sides of the covers allow a fast, ambidextrous flip-open action with thumb or finger pressure. Front cover opens to near horizontal position to help block rain or sunlight. Rear cover folds back on top of the EOTech’s protective hood to ensure an unobstructed view through the sight. Body section installs under the EOTech protective hood, so it’s not even visible. Noise-absorbing neoprene pads dampen the sound of the rear lens cover contacting the hood during covert operations.
SPECS: Rubber body, ABS plastic covers, neoprene pads, matte black. 1 oz. (28.4g) weight. Includes Torx wrenches for installation. XPS2/3 - 23⁄8" long, 2¼" (5.7cm) wide, 1½" (3.8cm) high. 1 oz. (28.4g) weight. Fits EOTech models XPS2 and XPS3 only.
Mehr...
Flexibler Gummikörper mit federbelasteten ABS-Kunststoffabdeckungen, die Schmutz, Staub und Feuchtigkeit abhalten, um die Linsenoberflächen deines EOTech Holografischen Visiers sauber und kratzfrei zu halten und in allen Schießbedingungen einsatzbereit zu sein. Laschen an den rechten und linken Seiten der Abdeckungen ermöglichen eine schnelle, beidhändige Flip-Open-Aktion mit Daumen oder Fingerdruck. Die vordere Abdeckung öffnet sich bis zu einer nahezu horizontalen Position, um Regen oder Sonnenlicht abzuhalten. Die hintere Abdeckung klappt zurück auf die Schutzhaube des EOTech, um eine ungehinderte Sicht durch das Visier zu gewährleisten. Der Körperteil wird unter der EOTech Schutzhaube installiert, sodass er nicht einmal sichtbar ist. Geräuschabsorbierende Neopren-Pads dämpfen das Geräusch der hinteren Linsenabdeckung, die während verdeckter Operationen mit der Haube in Kontakt kommt.
SPECS: Gummikörper, ABS-Kunststoffabdeckungen, Neopren-Pads, matt-schwarz. Gewicht 1 oz. (28,4g). Inklusive Torx-Schlüssel für die Installation. XPS2/3 - 23⁄8" lang, 2¼" (5,7cm) breit, 1½" (3,8cm) hoch. Gewicht 1 oz. (28,4g). Passt nur zu EOTech Modellen XPS2 und XPS3.
Mehr...
Kundenbewertungen zu GG&G, INC. GG&G XPS2 & XPS3 Lens Covers
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3
Poor Fit(04.12.2012)
Ordered this with my new Eotech. It did not fit through you could see it was designed for the sight. Instead of sending it back, I cut four slits with a fingernail clipper (one fore and aft on each side) in in bottom of the thing and ripped this initial cut up about 2/3 the depth of the side rubber. This gave the unit the flex to fit, although I have to use a rubber band around it to hold the front flap down. Poor fit to say the least. Wish there was an alternative.
For "XPS" NOT "EXPS"(02.04.2013)
Do not order this model if you have the EXPS model Eotech, it will not fit and is made strictly for the XPS models. I ordered one and found this out the hard way but Brownells gladly accepted it as a return and GG&G squared me away on which model I needed (EXPS Scope & Lense Cover Combo #GGG-1424)I gave this 5 stars because of its quality and the GG&G and Brownells customer service.
Artikel-Nr.: 336000038 GG&G, INC. GG&G XPS2 & XPS3 Lens Covers Herstellerproduktnummer: GGG1272813157001888 Flexibler Gummikörper mit federbelasteten ABS-Kunststoffabdeckungen, die Schmutz, Staub und Feuchtigkeit abhalten, um die Linsenoberflächen deines EOTech Holografischen Visiers sauber und kratzfrei zu halten und in allen Schießbedingungen einsatzbereit zu sein. Laschen an den rechten und linken Seiten der Abdeckungen ermöglichen eine schnelle, beidhändige Flip-Open-Aktion mit Daumen oder Fingerdruck. Die vordere Abdeckung öffnet sich bis zu einer nahezu horizontalen Position, um Regen oder Sonnenlicht abzuhalten. Die hintere Abdeckung klappt zurück auf die Schutzhaube des EOTech, um eine ungehinderte Sicht durch das Visier zu gewährleisten. Der Körperteil wird unter der EOTech Schutzhaube installiert, sodass er nicht einmal sichtbar ist. Geräuschabsorbierende Neopren-Pads dämpfen das Geräusch der hinteren Linsenabdeckung, die während verdeckter Operationen mit der Haube in Kontakt kommt.
Flexible rubber body with spring-loaded, ABS plastic covers help seal out dirt, dust and moisture to keep the lens surfaces of your EOTech holographic sight clean, scratch-free, and ready for use in all shooting conditions. Tabs on the right and left sides of the covers allow a fast, ambidextrous flip-open action with thumb or finger pressure. Front cover opens to near horizontal position to help block rain or sunlight. Rear cover folds back on top of the EOTech’s protective hood to ensure an unobstructed view through the sight. Body section installs under the EOTech protective hood, so it’s not even visible. Noise-absorbing neoprene pads dampen the sound of the rear lens cover contacting the hood during covert operations.
SPECS: Rubber body, ABS plastic covers, neoprene pads, matte black. 1 oz. (28.4g) weight. Includes Torx wrenches for installation. XPS2/3 - 23⁄8" long, 2¼" (5.7cm) wide, 1½" (3.8cm) high. 1 oz. (28.4g) weight. Fits EOTech models XPS2 and XPS3 only.
Mehr...
Flexibler Gummikörper mit federbelasteten ABS-Kunststoffabdeckungen, die Schmutz, Staub und Feuchtigkeit abhalten, um die Linsenoberflächen deines EOTech Holografischen Visiers sauber und kratzfrei zu halten und in allen Schießbedingungen einsatzbereit zu sein. Laschen an den rechten und linken Seiten der Abdeckungen ermöglichen eine schnelle, beidhändige Flip-Open-Aktion mit Daumen oder Fingerdruck. Die vordere Abdeckung öffnet sich bis zu einer nahezu horizontalen Position, um Regen oder Sonnenlicht abzuhalten. Die hintere Abdeckung klappt zurück auf die Schutzhaube des EOTech, um eine ungehinderte Sicht durch das Visier zu gewährleisten. Der Körperteil wird unter der EOTech Schutzhaube installiert, sodass er nicht einmal sichtbar ist. Geräuschabsorbierende Neopren-Pads dämpfen das Geräusch der hinteren Linsenabdeckung, die während verdeckter Operationen mit der Haube in Kontakt kommt.
SPECS: Gummikörper, ABS-Kunststoffabdeckungen, Neopren-Pads, matt-schwarz. Gewicht 1 oz. (28,4g). Inklusive Torx-Schlüssel für die Installation. XPS2/3 - 23⁄8" lang, 2¼" (5,7cm) breit, 1½" (3,8cm) hoch. Gewicht 1 oz. (28,4g). Passt nur zu EOTech Modellen XPS2 und XPS3.
Mehr...
Kundenbewertungen zu GG&G, INC. GG&G XPS2 & XPS3 Lens Covers
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3
Poor Fit(04.12.2012)
Ordered this with my new Eotech. It did not fit through you could see it was designed for the sight. Instead of sending it back, I cut four slits with a fingernail clipper (one fore and aft on each side) in in bottom of the thing and ripped this initial cut up about 2/3 the depth of the side rubber. This gave the unit the flex to fit, although I have to use a rubber band around it to hold the front flap down. Poor fit to say the least. Wish there was an alternative.
For "XPS" NOT "EXPS"(02.04.2013)
Do not order this model if you have the EXPS model Eotech, it will not fit and is made strictly for the XPS models. I ordered one and found this out the hard way but Brownells gladly accepted it as a return and GG&G squared me away on which model I needed (EXPS Scope & Lense Cover Combo #GGG-1424)I gave this 5 stars because of its quality and the GG&G and Brownells customer service.