Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

EGW
WALTHER 22 LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115679 296000679
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Colt 1911/.22 Rail Gun (Walther .22 Slide) This mount fits the Colt Rail Gun .22lr that has the slide made by Walther.
0 0 1 EUR
Artikel-Nr.: 296000679
EGW WALTHER 22 LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Herstellerproduktnummer: 49404 841370115679 EGW Red-Dot-Visiere sollen von links nach rechts installiert werden (wobei die Mündung nach vorne zeigt). Die Schwalbenschwanzführung hat eine progressive Verjüngung, um die Installation zu erleichtern. Entferne einfach das hintere Visier deiner Waffe und ersetze es durch die EGW-Montage, um dein Leupold DeltaPoint Pro, JPoint, Redfield Accelerator oder Optima Red-Dot-Visier zu montieren. Du kannst die Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial ist enthalten. Installationsanweisungen: Entferne das hintere Visier* Installiere die EGW-Sichtmontage in der Schwalbenschwanzführung Ziehe die Feststellschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW-Sichtmontage (das Platzieren eines kleinen Stücks Papier zwischen dem Red-Dot-Visier und der Sichtmontage wird die spätere Entfernung erleichtern und hält Loctite von dem Red-Dot-Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs fest Eine Modifikation deiner Waffe kann die Garantie des Herstellers erlöschen lassen. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Für Schäden oder Verletzungen, die durch unsachgemäße Installation oder Benutzung dieses Produkts entstehen können, wird keine Haftung übernommen. Diese Montage passt für: Colt 1911/.22 Rail Gun (Walther .22 Schlitten) Diese Montage passt für die Colt Rail Gun .22lr, die einen von Walther hergestellten Schlitten hat.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Walther, Colt Material: Aluminum Modell: P22, 1911

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Walther,Colt Material: Aluminum Modell: P22,1911 Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm

Artikeldetails

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Colt 1911/.22 Rail Gun (Walther .22 Slide) This mount fits the Colt Rail Gun .22lr that has the slide made by Walther.
Newsletter