EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Does not work with Rock Island 1911 or EAA/Tanfoglio Witness with LPA/Bomar style rear sights.
Die perfekte Montage für deine Vortex Viper/Venom!
Die EGW Low Vortex Viper/Venom Sight Mount ist die ideale Lösung, um deine red dot sights sicher und einfach zu montieren. Mit dieser Montage kannst du deine Vortex Viper/Venom, Burris FastFire oder Docter red-dot sights problemlos anbringen.
Produktbeschreibung
Die EGW red dot sights sind dafür gedacht, von links nach rechts (mit dem Lauf nach vorne) installiert zu werden. Der Dovetail hat eine progressive Taperung, die die Installation erleichtert. Entferne einfach die hintere Visierung deines Gewehrs und ersetze sie durch die EGW-Montage.
- Montageanleitung:
- Entferne die hintere Visierung*
- Installiere die EGW Sight Mount im Dovetail
- Ziehe die Set-Schraube fest (falls zutreffend)
- Platziere die red dot sight auf der EGW Sight Mount (ein kleines Stück Papier zwischen der red dot sight und der Sight Mount erleichtert die Entfernung und schützt die red dot sight vor Loctite)
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf
- Ziehe die Montageschrauben auf 15in/lbs an
Lieferumfang:
- 2 Button Head Cap Screws - für Vortex Viper und Venom Sights
- 2 Flat Head Cap Screws - für Burris FastFire und Docter Sights
Die mitgelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel für die Installation. Beachte, dass Änderungen an deinem Feuerwaffen die Herstellergarantie ungültig machen können. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Für Schäden oder Verletzungen, die aus unsachgemäßer Installation oder Nutzung dieses Produkts resultieren, wird keine Haftung übernommen.
Hinweis: Funktioniert nicht mit Rock Island 1911 oder EAA/Tanfoglio Witness mit LPA/Bomar Stil hinteren Visierungen.