Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

EGW
DESERT EAGLE (POST 2017) TRIJICON RMR SIGHT MOUNT

841370116898 296000593
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
76.9 76.9 1 EUR
Artikel-Nr.: 296000593
EGW Desert Eagle (Post 2017) Trijicon RMR Sight Mount
Herstellerproduktnummer: 49534 841370116898 Material: 7075 Aluminium Beschichtung: Mattschwarz Hardcoat Gesamtlänge: 1,780" Gesamtbreite: 1,1" Montagematerial: (2) 6-32 Flachkopfschrauben, (1) 6-32 X 3/16 Madenschraube Red Dot Passform: Trijicon RMR, Holosun HS507C Diese Montage passt für: Baby Desert Eagle (Post 2006) EAA Witness Elite Match Diese Montage passt nicht für: Rock Island 1911s Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Trijicon RMR Red Dot Visier zu montieren. Keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial inklusive. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Visiermontage im Schwalbenschwanz Straffe die Madenschraube (falls zutreffend) Platziere das Red Dot Visier auf der EGW Visiermontage (das Einlegen eines kleinen Papierstücks zwischen dem Red Dot Visier und der Visiermontage erleichtert die Demontage und hält Loctite vom Red Dot Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs an 2 Flachkopfschrauben - Für Trijicon RMR bereitgestellt Die mit dieser Montage gelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel zur Installation.
76.9 EUR 0 76,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Magnum Research Material: Aluminum Modell: Desert Eagle

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Magnum Research Material: Aluminum Modell: Desert Eagle Versandgewicht: 0,204kg Versandhöhe: 13mm Versandbreite: 102mm Versandlänge: 127mm

Artikeldetails

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter