Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

EGW
DESERT EAGLE LEUPOLD DELTAPOINT PRO SIGHT MOUNT

296000545
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 EUR
Artikel-Nr.: 296000545
EGW Desert Eagle(Post 2017) Leupold DeltaPoint Pro Sight Mount
Herstellerproduktnummer: 49396 Material: 7075 Aluminium Beschichtung: Mattschwarz Hardcoat Gesamtlänge: 1.811" Gesamtbreite: .99" Montagematerial: (2) 6-32 Button Head Schrauben, (2) 6-32 Flachkopfschrauben, (1) 6-32 Madenschraube Red Dot Passform: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Die Red-Dot-Visiere von EGW sind dafür ausgelegt, von links nach rechts installiert zu werden (mit dem Lauf nach vorne gerichtet). Das Schwalbenschwanzprofil hat eine progressive Verjüngung, um die Installation zu erleichtern. Entferne einfach das hintere Visier deiner Waffe und ersetze es durch unsere Montage, um dein Vortex Viper/Venom, Burris FastFire oder Docter Red-Dot-Visier zu montieren. Keine Änderungen sind erforderlich. Du kannst unsere Montage jederzeit abnehmen und das hintere Visier wieder anbringen. Montagematerial inklusive. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Sight Mount im Schwalbenschwanz Ziehe die Madenschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen Red-Dot-Visier und Montage wird die Demontage erleichtern und hält Loctite vom Red-Dot-Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit 15in/lbs an 2 Button Head Cap Schrauben - Bereitgestellt für Vortex Viper und Venom Sights 2 Flachkopfschrauben - Bereitgestellt für Burris FastFire und Docter Sights Die mit dieser Montage gelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel für die Installation.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Magnum Research Material: Aluminum Modell: Desert Eagle

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Magnum Research Material: Aluminum Modell: Desert Eagle Versandgewicht: 0,04kg Versandhöhe: 19mm Versandbreite: 83mm Versandlänge: 133mm

Artikeldetails

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter