Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.604" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Entdecke die perfekte Montage für deine CZ Shadow 2!
Die CZ SHADOW 2 LEUPOLD DELTAPOINT PRO SIGHT MOUNT und die CZ SHADOW 2 VORTEX LEUPOLD DELTAPOINT PRO SIGHT MOUNT von EGW bieten dir eine hochwertige Lösung für die Montage deiner Rotpunktvisiere.
Produktbeschreibung
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.604"
- Gesamtbreite: .99"
- Montagehardware: (2) 6-32 Button Head Schrauben, (2) 6-32 Flachkopf Schrauben, (1) 6-32 Set Schraube
- Kompatibilität: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter
Die Rotpunktvisiere von EGW sind so konzipiert, dass sie von links nach rechts montiert werden (mit dem Lauf nach vorne gerichtet). Der Dovetail hat eine progressive Taper, die eine einfachere Installation ermöglicht. Entferne einfach die Kimme deiner Waffe und ersetze sie durch unsere Montage, um dein Vortex Viper/Venom, Burris FastFire oder Docter Rotpunktvisier zu montieren. Es sind keine Änderungen erforderlich, und du kannst unsere Montage jederzeit abnehmen und deine Kimme wieder anbringen.
Montageanleitung
- Entferne die Kimme*
- Installiere die EGW Sight Mount im Dovetail
- Ziehe die Set Schraube an (falls zutreffend)
- Setze das Rotpunktvisier auf die EGW Sight Mount (ein kleines Stück Papier zwischen dem Rotpunktvisier und der Montage erleichtert die Entfernung und hält Loctite vom Rotpunktvisier fern).
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf
- Ziehe die Montageschrauben auf 15 in/lbs an
Hinweis: Die mit dieser Montage gelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel für die Installation.