Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Mehr...
Material: 7075 Aluminium Beschichtung: Mattschwarz Hardcoat Gesamtlänge: 1,831" (46,51 mm) Gesamtbreite: 1,062" (26,97 mm) Montagematerial: (2) 8-32 Knopfkopfschrauben, (1) 8-32 Madenschraube Red Dot Passform: Vortex Razor, C-More RTS & STS Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Razor, C-More RTS oder STS Red-Dot-Visier zu montieren. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und das hintere Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Visiermontage in der Schwalbenschwanzführung Ziehe die Madenschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Visiermontage (ein kleines Stück Papier zwischen Red-Dot-Visier und Montage zu legen, erleichtert die Demontage und schützt vor Loctite.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs (1,69 Nm) fest
Mehr...
77.977.91EUR
Artikel-Nr.: 296000557 EGW CZ P10C Vortex Razor Sight Mount Herstellerproduktnummer: 49462841370117048 Material: 7075 Aluminium Beschichtung: Mattschwarz Hardcoat Gesamtlänge: 1,831" (46,51 mm) Gesamtbreite: 1,062" (26,97 mm) Montagematerial: (2) 8-32 Knopfkopfschrauben, (1) 8-32 Madenschraube Red Dot Passform: Vortex Razor, C-More RTS & STS Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Razor, C-More RTS oder STS Red-Dot-Visier zu montieren. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und das hintere Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Visiermontage in der Schwalbenschwanzführung Ziehe die Madenschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Visiermontage (ein kleines Stück Papier zwischen Red-Dot-Visier und Montage zu legen, erleichtert die Demontage und schützt vor Loctite.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs (1,69 Nm) fest
77.9EUR077,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Mehr...
Material: 7075 Aluminium Beschichtung: Mattschwarz Hardcoat Gesamtlänge: 1,831" (46,51 mm) Gesamtbreite: 1,062" (26,97 mm) Montagematerial: (2) 8-32 Knopfkopfschrauben, (1) 8-32 Madenschraube Red Dot Passform: Vortex Razor, C-More RTS & STS Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Razor, C-More RTS oder STS Red-Dot-Visier zu montieren. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und das hintere Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Visiermontage in der Schwalbenschwanzführung Ziehe die Madenschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Visiermontage (ein kleines Stück Papier zwischen Red-Dot-Visier und Montage zu legen, erleichtert die Demontage und schützt vor Loctite.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs (1,69 Nm) fest