Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland
787308101
Contour #1 in Chrome Moly
All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.

Click here to view contour specifications.

SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).

Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.

529.9 529.9 1 EUR
Artikel-Nr.: 787308101
SHILEN .30, 10 Twist, CM
Herstellerproduktnummer: 30101CM All die liebevolle Sorgfalt des besten Schaftmachers und die akribische Aufmerksamkeit fürs Detail des Meistermechanikers können ein Gewehr nicht genauer schießen lassen als die Genauigkeitsfähigkeit des verwendeten Laufs. Und es sind die Innenseiten eines Laufs, jener sehr kleine und entscheidende Bereich von Feldern und Zügen, über den der Büchsenmacher keine Kontrolle hat, der bestimmt, ob das fertige Kunstwerk zum Schießen - oder „nur zum Anschauen“ ist. Handwerkskunst... nicht der Preis... bestimmt die Qualität eines Laufs. Aber ebenso ist der Kunde, der bereit ist, Geld für eine maßgefertigte Waffe auszugeben, kurzsichtig, wenn er anfängt zu sparen und „irgendeinen alten Lauf bestellt, solange er nur billig ist“. Zudem gefährdet er Deinen Ruf als Waffenbauer, indem er eine solche Anfrage stellt. Wir als Dein Lieferant setzen unseren Ruf (und auch Deinen!) aufs Spiel, indem wir Dir Laufrohlinge anbieten. Sie müssen gut sein, sonst haben wir ein großes Problem!! Wir dürfen Dir nie etwas anderes verkaufen, als das, was Dein Ansehen bei Deinen Kunden vergrößert. Und wir sind der Meinung, dass der Brownell-Lauf, der für uns von Ed Shilen hergestellt wird, genau das tun wird! Shilen Läufe, entweder aus Chrom-Moly oder Edelstahl, sind mit sechs Feldern und Zügen durch den „Kaltformungs“-Prozess mit Karbiddornen geriffelt, die in Shilens eigener Fabrik unter strengsten Kontrollen hergestellt werden. Dieses Riffelungsverfahren erreicht extrem hohe innere Gleichmäßigkeit von Patronenlager bis Mündung. Fertige Läufe werden mit Luftmessgeräten überprüft (Empfindlichkeit der Luftmessung beträgt 0,00005" - fünf-einhunderttausendstel!) und mit einem 6X-Boreskop inspiziert. Alle Läufe, von .22 bis .30 Kaliber, haben Rillentoleranzen innerhalb von 0,0005" und Gleichmäßigkeit innerhalb von 0,0003". Es wird keine Richten durchgeführt, und alle Läufe sind vollständig spannungsfrei. Alle Edelstahlläufe werden in der Fabrik von Hand geläppt. Nur die Läufe, die alle Spezifikationstests bestehen, werden dem Handel angeboten. Jeder auch nur im Geringsten „verdächtige“ Lauf wird erneut durch den Produktionsprozess geschickt und auf ein größeres Kaliber aufgebohrt. Auf keine andere Weise kann Qualität und Ruf erhalten bleiben. Etwas teurer in der Produktion - aber unvergleichlich höher in Qualität und letztendlicher Leistung.
529.9 EUR 1 529,90 € *
Lieferzeit ca. 14-21 Tage.
1 Stk. im Großlager
Eigenschaften: Art: Match-Grade Drall: 1-10 Kaliber: 30 Caliber (.308) Kontur: #1 Material: Chrome Moly Steel

Kaufbeschränkungen

  • Abgabe nur an Inhaber einer Erwerbserlaubnis.

Eigenschaften

Art: Match-Grade Dralllänge: 1-10 Kaliber: 30 Caliber (.308) Kontur: #1 Material: Chrome Moly Steel Versandgewicht: 1,043kg Versandhöhe: 28mm Versandbreite: 30mm Versandlänge: 559mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c



Contour #1 in Chrome Moly
All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.

Click here to view contour specifications.

SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).

Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.

Newsletter