Ihr Warenkorb ist leer.

Warenkorb

Newsletter abonnieren

CYLINDER & SLIDE
COLT .380 ALUMINUM TRIGGER

000000003117 206000020

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

Long-wearing, CNC-machined, aluminum trigger easily replaces the Colt factory nylon/plastic trigger for increased durability and a more solid feeling trigger pull. Use as a standalone enhancement or part of a complete trigger job. Installation may require slight modification; completely eliminates premature trigger wear breakage at the trigger pivot pin hole.

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Mehr...

Ersetzt das Kunststoffteil der Fabrik für bessere Haltbarkeit, verbessertes "Gefühl"

Langlebiger, CNC-gefräster Aluminiumabzug, der den Colt Werks-Nylon/Kunststoffabzug für erhöhte Haltbarkeit und ein solideres Abzugsgefühl leicht ersetzen kann. Kann als einzelne Verbesserung oder als Teil einer kompletten Abzugsaufwertung verwendet werden. Die Installation kann leichte Modifikationen erfordern; eliminiert vollständig vorzeitigen Verschleiß und Bruch am Abzugdrehbolzenloch.

SPECS: Aluminium, mattes Silber. Passt für Colt .380 Government und Mustang Modelle.

Mehr...

Kundenbewertungen zu CYLINDER & SLIDE Aluminum Colt .380 Trigger

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4,1

I would and did buy this product again (21.04.2010)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (07.03.2012)

I had asked the question about whether or not this would fit the new Sig P238, but the response was NO. I decided that my curiousity would not let that deter me from trying it out... After all the Wolff springs will fit both the Colt and the Sig. This went in without a problem and worked out very well. The only thing that I would add to this part (and I am surprised that it was not added) would be an overtravel screw at the bottom. I installed my own and it makes a huge difference. Also, one in a parkerized black would be sweet as well. If Cylinder and Slide decide to machine one in, please send one to me !! and Brownells, advertise this for the Sig P238 also.

A lot better (02.04.2012)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (06.04.2012)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (27.07.2012)

mine had some metal shavings in the nooks and the mounting pin holes shifted the trigger lever back a few mils causing it to get stuck on the ejector clip preventing the trigger from resetting. It only happened when you fired it with live rounds too. Work just fine dry firing. Took me a while to find that one. I fixed that by rounding the corners on the trigger bar bracket. I hit it with some 1100 grit sandpaper to shine it up a bit and get it to slide in a little easier when installing

P938 (10.09.2012)

I read some things about possible using this in the Sig p938. I took the chance and replaced the plastic trigger in the P938 and this one works great. I have also read you can use this in the p238 as well.

Worsened the trigger in P238 (08.11.2014)

I think My upgraded trigger must have been overbored where the trigger spring goes, it seems to have slightly increased the amount of slop and creep, giving the P238 slightly more spongy feeling, and not as crisp as the stock plastic trigger.

I can hear the spring grating on the inside of the trigger as well, none of this happened with the stock plastic piece.

I'm leaving it in for now, to see how this performs at the range.

On a positive side note, trigger breaks at slightly lower weight now, but I didnt put up the trigger gauge pre or post.

Edit: removed the trigger, lubed up the spring and cleaned out the trigger spring area, seems to have improved the trigger and decreased sponginess, still not as crisp as stock though.

My Colt Mustang pocketlite serial no PL1147XX comes with anodized aluminum trigger and did not need to be replaced

Needs to be fit. (11.08.2017)

This is the third trigger that I have installed in a Mustang made by Cylinder and Slide.This one was the worst.The trigger bar slot had to be fit, the Spring hole had to be fit and the pivot hole had to be fit. I think their tooling has to be replaced.

Lesen Sie 8 weitere Bewertungen bei brownells.com

52.9 52.9 1 EUR

Artikel-Nr.: 206000020
CYLINDER & SLIDE Aluminum Colt .380 Trigger
Herstellerproduktnummer: CS311 000000003117 Langlebiger, CNC-gefräster Aluminiumabzug, der den Colt Werks-Nylon/Kunststoffabzug für erhöhte Haltbarkeit und ein solideres Abzugsgefühl leicht ersetzen kann. Kann als einzelne Verbesserung oder als Teil einer kompletten Abzugsaufwertung verwendet werden. Die Installation kann leichte Modifikationen erfordern; eliminiert vollständig vorzeitigen Verschleiß und Bruch am Abzugdrehbolzenloch.

52.9 EUR 12 52,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Art: Grooved Finish: Silver Hersteller/Modell: Colt Modell: Government, Mustang

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Grooved Finish: Silver Hersteller/Modell: Colt Modell: Government,Mustang Versandgewicht: 0,005kg Versandhöhe: 5mm Versandbreite: 79mm Versandlänge: 155mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Mehr...

Ersetzt das Kunststoffteil der Fabrik für bessere Haltbarkeit, verbessertes "Gefühl"

SPECS: Aluminium, mattes Silber. Passt für Colt .380 Government und Mustang Modelle.

Mehr...

Kundenbewertungen zu CYLINDER & SLIDE Aluminum Colt .380 Trigger

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4,1

I would and did buy this product again (21.04.2010)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (07.03.2012)

A lot better (02.04.2012)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (06.04.2012)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (27.07.2012)

P938 (10.09.2012)

Worsened the trigger in P238 (08.11.2014)

Needs to be fit. (11.08.2017)

Lesen Sie 8 weitere Bewertungen bei brownells.com

Kunden kauften auch

AIMTECH Remington 1100/11-87 12ga Scope Mount
AIMTECH SHOTGUN SCOPE MOUNT

AIMTECH

Bestellbar, nicht vorrätig

66,90 € * 63,90 € - 105,90 €*

Prismen für Schrotflinten

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.