Makes uniform, precise fitting of an oversized bushing or cone style compensator fast and simple. Two-piece mandrel threads together with the bushing/comp in between. Flat seat locates front of bushing; tapered, hardened "nose" automatically centers the rear. Mount in the lathe or drill press and file or turn O.D. as needed.
SPECS: Machined steel. 11/16" (17.4mm) diameter. Approximately 4" (10.2cm) long. Comes complete with "A" rod for bushing, "B" rod for cone style comps. Instructions included.
Mehr...
Griffe & Mitten zum Drehen O.D.
Ermöglicht die schnelle und einfache gleichmäßige und präzise Montage einer übergroßen Buchse oder eines Kompensators im Kegelstil. Zweiteiliges Dorngewinde mit dazwischenliegender Buchse / Komp. Der flache Sitz befindet sich vor der Buchse. Die abgeschrägte, gehärtete "Nase" zentriert automatisch das Heck. In die Drehmaschine oder Bohrmaschine einbauen und O.D. abfeilen oder wenden. wie benötigt.
TECHNISCHE DATEN: Bearbeiteter Stahl. 11/16 "(17,4 mm) Durchmesser. Ungefähr 4" (10,2 cm) lang. Kommt komplett mit "A" -Stange für Buchsen, "B" -Stange für Kegelformteile. Anleitung liegt bei.
Mehr...
Kundenbewertungen zu BROWNELLS Bushing/Compensator "B" Rod
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Excellent, well made product(24.02.2010)
This product in instrumnetal in fitting barrel bushings, and compensators on 1911 pistols. It is so easy to just screw your bushihg in between the little cones, chuck the thing up in the lathe and youre good to go. Awesome product that makes life a little easier. Came with standard Brownells Directions but were a little strange for this one with very little information about how to use this particular product. It was a sheet made for many products with a small section about this one.
Recommended to fit match grade bushing(22.12.2011)
I followed the directions and worked slowly. Made fitting the match bushing to the frame much easier. I used this product with the "B" Reamer to to fit the bushing to the barrel. Together they made fitting a 1911 match grade bushing much easier.
Artikel-Nr.: 080804101 BROWNELLS Bushing/Compensator "B" Rod Ermöglicht die schnelle und einfache gleichmäßige und präzise Montage einer übergroßen Buchse oder eines Kompensators im Kegelstil. Zweiteiliges Dorngewinde mit dazwischenliegender Buchse / Komp. Der flache Sitz befindet sich vor der Buchse. Die abgeschrägte, gehärtete "Nase" zentriert automatisch das Heck. In die Drehmaschine oder Bohrmaschine einbauen und O.D. abfeilen oder wenden. wie benötigt.
25.9EUR025,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 080804100 BROWNELLS Bushing/Compensator Fitting Mandrel Ermöglicht die schnelle und einfache gleichmäßige und präzise Montage einer übergroßen Buchse oder eines Kompensators im Kegelstil. Zweiteiliges Dorngewinde mit dazwischenliegender Buchse / Komp. Der flache Sitz befindet sich vor der Buchse. Die abgeschrägte, gehärtete "Nase" zentriert automatisch das Heck. In die Drehmaschine oder Bohrmaschine einbauen und O.D. abfeilen oder wenden. wie benötigt.
77.9EUR077,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Makes uniform, precise fitting of an oversized bushing or cone style compensator fast and simple. Two-piece mandrel threads together with the bushing/comp in between. Flat seat locates front of bushing; tapered, hardened "nose" automatically centers the rear. Mount in the lathe or drill press and file or turn O.D. as needed.
SPECS: Machined steel. 11/16" (17.4mm) diameter. Approximately 4" (10.2cm) long. Comes complete with "A" rod for bushing, "B" rod for cone style comps. Instructions included.
Mehr...
Griffe & Mitten zum Drehen O.D.
Ermöglicht die schnelle und einfache gleichmäßige und präzise Montage einer übergroßen Buchse oder eines Kompensators im Kegelstil. Zweiteiliges Dorngewinde mit dazwischenliegender Buchse / Komp. Der flache Sitz befindet sich vor der Buchse. Die abgeschrägte, gehärtete "Nase" zentriert automatisch das Heck. In die Drehmaschine oder Bohrmaschine einbauen und O.D. abfeilen oder wenden. wie benötigt.
TECHNISCHE DATEN: Bearbeiteter Stahl. 11/16 "(17,4 mm) Durchmesser. Ungefähr 4" (10,2 cm) lang. Kommt komplett mit "A" -Stange für Buchsen, "B" -Stange für Kegelformteile. Anleitung liegt bei.
Mehr...
Kundenbewertungen zu BROWNELLS Bushing/Compensator "B" Rod
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Excellent, well made product(24.02.2010)
This product in instrumnetal in fitting barrel bushings, and compensators on 1911 pistols. It is so easy to just screw your bushihg in between the little cones, chuck the thing up in the lathe and youre good to go. Awesome product that makes life a little easier. Came with standard Brownells Directions but were a little strange for this one with very little information about how to use this particular product. It was a sheet made for many products with a small section about this one.
Recommended to fit match grade bushing(22.12.2011)
I followed the directions and worked slowly. Made fitting the match bushing to the frame much easier. I used this product with the "B" Reamer to to fit the bushing to the barrel. Together they made fitting a 1911 match grade bushing much easier.