Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

HARRISON DESIGN & CONSULTING
SANDING BLOCK FOR 1911 SLIDE AND FRAME FLATS

100019354
Harrison Design and Consulting have used these 2"x7" aluminum sanding block in their shop for years to be able to level and sand out slide and frame flats to any level of polish that their clients have ordered. They think they work so well, that they wanted to offer them for sale. The clamp plate keeps the abrasive paper pulled taught, while the finger and thumb grooves on the sides help you control and direct the block without tiring you out, trying to keep the paper taught, like on a makeshift sanding block. Harrison Design and Consulting's sanding blocks use a 2" wide piece of sandpaper or 2" wide emory strip. They recommend sheet sandpaper in 9"x11" sheets and then advise you tear it length-wise, procure 3 strips 2" wide, plus another 1" wide strip that you could save for general shoe-shine blending. Harrison Design and Consulting include a loose piece of 2" wide 7" long 40 durometer Buna-N rubber that you can use between the abrasive paper and sanding block at your option. When sanding out flats that are a little wavy and they have roll marks, they normally use the rubber to allow some give in the sandpaper and help it follow the surface, rather than forcing it to level the surface. When you've worn out a piece of paper, tear off those un-used ends and save them for wrapping around sanding sticks and files to sand small surfaces.
85.9 85.9 1 EUR
Artikel-Nr.: 100019354
HARRISON DESIGN & CONSULTING Aluminum Sanding Block
Herstellerproduktnummer: HDBLOCK Harrison Design & Consulting verwendet seit Jahren diese 2"x7" Aluminium-Schleifblöcke in ihrer Werkstatt, um Schlitten und Rahmenflächen auf jedes gewünschte Polierniveau zu ebenen und zu schleifen, das ihre Kunden bestellt haben. Sie finden sie so effektiv, dass sie beschlossen haben, sie auch zum Verkauf anzubieten. Die Klemmplatte hält das Schleifpapier straff, während die Rillen für Finger und Daumen an den Seiten helfen, den Block zu kontrollieren und zu führen, ohne dass du dich anstrengst, das Papier straff zu halten, wie bei einem improvisierten Schleifblock. Die Schleifblöcke von Harrison Design & Consulting verwenden ein 2" breites Stück Schleifpapier oder einen 2" breiten Schmirgelstreifen. Sie empfehlen Schleifpapier in 9"x11" Bögen und raten dir, es der Länge nach zu teilen, um 3 Streifen zu je 2" Breite zu erhalten, plus einen weiteren 1" breiten Streifen, den du für allgemeine Schuhputz-Mischtechniken aufbewahren kannst. Harrison Design & Consulting legen ein loses Stück 2" breites und 7" langes 40 Durometer Buna-N Gummi bei, das du optional zwischen dem Schleifpapier und dem Schleifblock verwenden kannst. Beim Schleifen von Flächen, die etwas wellig sind und Walzspuren aufweisen, verwenden sie normalerweise das Gummi, um dem Schleifpapier etwas Nachgiebigkeit zu ermöglichen und es der Oberfläche folgen zu lassen, statt es zu zwingen, die Oberfläche zu ebnen. Wenn du ein Stück Papier abgenutzt hast, reiße die unbenutzten Enden ab und bewahre sie auf, um sie um Schleifstäbchen und Feilen zu wickeln, mit denen du kleine Flächen schleifen kannst.
85.9 EUR 1 85,90 € *
Lieferzeit ca. 14-21 Tage.
1 Stk. im Großlager

Eigenschaften

Versandgewicht: 0,692kg Versandhöhe: 32mm Versandbreite: 57mm Versandlänge: 203mm

Artikeldetails

Made in USA



Harrison Design and Consulting have used these 2"x7" aluminum sanding block in their shop for years to be able to level and sand out slide and frame flats to any level of polish that their clients have ordered. They think they work so well, that they wanted to offer them for sale. The clamp plate keeps the abrasive paper pulled taught, while the finger and thumb grooves on the sides help you control and direct the block without tiring you out, trying to keep the paper taught, like on a makeshift sanding block. Harrison Design and Consulting's sanding blocks use a 2" wide piece of sandpaper or 2" wide emory strip. They recommend sheet sandpaper in 9"x11" sheets and then advise you tear it length-wise, procure 3 strips 2" wide, plus another 1" wide strip that you could save for general shoe-shine blending. Harrison Design and Consulting include a loose piece of 2" wide 7" long 40 durometer Buna-N rubber that you can use between the abrasive paper and sanding block at your option. When sanding out flats that are a little wavy and they have roll marks, they normally use the rubber to allow some give in the sandpaper and help it follow the surface, rather than forcing it to level the surface. When you've worn out a piece of paper, tear off those un-used ends and save them for wrapping around sanding sticks and files to sand small surfaces.
Newsletter