Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland
080860307
To complement our “Ring-Of-Steel” Action Wrench System, we’ve developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive four bolt system and extra-wide design generates so much holding force, the Brownells Barrel Vise must be firmly bolted to the stoutest bench or an immovable base to realize its full ­potential. Split barrel bushings come in a variety of sizes to fit many popular barrels (and some not-so-common ones) to make this universal Barrel Vise system the very first choice of ­professional gunsmiths. Steel Bushings provide years of service and have the necessary clamping power to break loose the tightest barrels. Aluminum Bushings also give a strong hold without risk of marring your barrel.  

SPECS: Blocks - Steel, blued. Top Block - 4-1/2" (11.4cm) x 3" (7.6cm) x 1-1/2" (3.8cm). Bottom Block - 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). ­Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish or 6160 aluminum, natural finish. All bushings 3" long, -13/4" diameter. #4, 7, 8, 9, 10 and 11 are in a range of I.D.’s to closely match the shank diameters of most rifle barrels. #5 fits military Mauser 98 barrels. #6 is tapered to fit Remington factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy M14/M1A/M1 Garand barrels. #15 is for the FN FAL barrel. #16 is an aluminum bushing for ?" octagonal barrels. Steel and Aluminum Barrel Vise Sets come complete with the four ?"-20 tpi x 2" Allen head bolts, hex wrench, and bushings #4, #6, #7, #8, #9, #10 and #11. (Bushings #5, 12, 13, 14, 15 and 16 must be purchased separately).

377.9 377.9 2 EUR
Artikel-Nr.: 080860307
BROWNELLS Aluminum Barrel Vise Set Um unser „Ring-Of-Steel“ Action Wrench System zu ergänzen, haben wir den einzigen professionellen Laufschraubstock entwickelt, der selbst den festesten Lauf beim Entfernen sicher klemmt und verhindert, dass er sich dreht. Gefertigt aus massivem Stahl für Langlebigkeit, um den Bedürfnissen von Büchsenmachern bei der Montage und Demontage von Läufen über viele Jahre hinweg gerecht zu werden. Unser exklusives Vier-Bolzen-System und das extra-breite Design erzeugen so viel Haltekraft, dass der Brownells Laufschraubstock fest an die stabilste Werkbank oder eine unbewegliche Basis geschraubt werden muss, um sein volles Potenzial zu entfalten. Geteilte Laufbuchsen sind in einer Vielzahl von Größen erhältlich, um viele beliebte Läufe (und einige nicht so gängige) zu passen, was dieses universelle Laufschraubstock-System zur ersten Wahl von professionellen Büchsenmachern macht. Stahlbuchsen bieten jahrelangen Einsatz und haben die notwendige Klemmkraft, um selbst die festesten Läufe zu lösen. Aluminiumbuchsen bieten ebenfalls einen starken Halt, ohne das Risiko, den Lauf zu beschädigen.
377.9 EUR 0 377,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften: Material: Aluminum

Eigenschaften

Material: Aluminum Versandgewicht: 6,055kg

Artikeldetails

Made in USA



Artikel-Nr.: 080860107
BROWNELLS Steel Barrel Vise Set Um unser „Ring-Of-Steel“ Action Wrench System zu ergänzen, haben wir den einzigen professionellen Laufschraubstock entwickelt, der selbst den festesten Lauf beim Entfernen sicher klemmt und verhindert, dass er sich dreht. Gefertigt aus massivem Stahl für Langlebigkeit, um den Bedürfnissen von Büchsenmachern bei der Montage und Demontage von Läufen über viele Jahre hinweg gerecht zu werden. Unser exklusives Vier-Bolzen-System und das extra-breite Design erzeugen so viel Haltekraft, dass der Brownells Laufschraubstock fest an die stabilste Werkbank oder eine unbewegliche Basis geschraubt werden muss, um sein volles Potenzial zu entfalten. Geteilte Laufbuchsen sind in einer Vielzahl von Größen erhältlich, um viele beliebte Läufe (und einige nicht so gängige) zu passen, was dieses universelle Laufschraubstock-System zur ersten Wahl von professionellen Büchsenmachern macht. Stahlbuchsen bieten jahrelangen Einsatz und haben die notwendige Klemmkraft, um selbst die festesten Läufe zu lösen. Aluminiumbuchsen bieten ebenfalls einen starken Halt, ohne das Risiko, den Lauf zu beschädigen.
377.9 EUR 1 377,90 € *
Lieferzeit ca. 14-21 Tage.
1 Stk. im Großlager
Eigenschaften: Material: Steel
To complement our “Ring-Of-Steel” Action Wrench System, we’ve developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive four bolt system and extra-wide design generates so much holding force, the Brownells Barrel Vise must be firmly bolted to the stoutest bench or an immovable base to realize its full ­potential. Split barrel bushings come in a variety of sizes to fit many popular barrels (and some not-so-common ones) to make this universal Barrel Vise system the very first choice of ­professional gunsmiths. Steel Bushings provide years of service and have the necessary clamping power to break loose the tightest barrels. Aluminum Bushings also give a strong hold without risk of marring your barrel.  

SPECS: Blocks - Steel, blued. Top Block - 4-1/2" (11.4cm) x 3" (7.6cm) x 1-1/2" (3.8cm). Bottom Block - 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). ­Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish or 6160 aluminum, natural finish. All bushings 3" long, -13/4" diameter. #4, 7, 8, 9, 10 and 11 are in a range of I.D.’s to closely match the shank diameters of most rifle barrels. #5 fits military Mauser 98 barrels. #6 is tapered to fit Remington factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy M14/M1A/M1 Garand barrels. #15 is for the FN FAL barrel. #16 is an aluminum bushing for ?" octagonal barrels. Steel and Aluminum Barrel Vise Sets come complete with the four ?"-20 tpi x 2" Allen head bolts, hex wrench, and bushings #4, #6, #7, #8, #9, #10 and #11. (Bushings #5, 12, 13, 14, 15 and 16 must be purchased separately).

Newsletter