Professional Grade AR Upper Receiver Fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the AR15/M16/M4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the Device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "T" interface. Front and rear lugs are controlled along with the entire bottom receiver flat. Compatible with milspec dimensioned receivers and billet receivers utilizing milspec internal dimensions. The Device does not contact barrel extension and is not caliber sensitive. Accurate Picatinny rail, with enumeration, allows for quick optic set-up or repair. A lanyard is provided to keep parts at-hand and help prevent dropping. An internal spring loaded detent allows for vertical application without loss of control. A2 and M4 rear sight tension spring alignment and removal is built in. Forward Assist removal channel in base. "Bolt carrier" style recesses allows Ejection Port door opening and testing.
Mehr...
Profi-Qualität AR Upper Receiver Halterung. Robuste Halterung für jahrelangen intensiven Einsatz. Schnelle, intuitive Schnittstelle, die den schnellen Aufbau/Neuaufbau und die Reparatur des gesamten Upper Receivers der AR15/M16/M4-Familie von Gewehren/Karabinern/Pistolen ermöglicht. Entwickelt, um die Installation oder Entfernung aller Upper Receiver-Teile ohne Behinderung zu ermöglichen. Mit Blick auf Schienensysteme konzipiert, bietet das Gerät Platz für die meisten Schienensysteme, um Installation und Entfernung zu ermöglichen, während der Upper sicher gehalten wird. Hält den Receiver von innen über die Bolt Carrier Laufbahn und die Charging Handle Laufbahn mittels einer "T"-Schnittstelle. Vordere und hintere Verriegelungen werden zusammen mit der gesamten unteren Receiver-Fläche kontrolliert. Kompatibel mit milspec-dimensionierten Receivern und Billet-Receivern, die milspec-interne Abmessungen verwenden. Das Gerät kommt nicht in Kontakt mit der Laufverlängerung und ist nicht kalibersensitiv. Eine genaue Picatinny-Schiene mit Nummerierung ermöglicht eine schnelle Optik-Einrichtung oder Reparatur. Ein Lanyard wird bereitgestellt, um Teile griffbereit zu halten und das Herunterfallen zu verhindern. Ein interner, federbelasteter Detent ermöglicht die vertikale Anwendung ohne Kontrollverlust. Die Ausrichtung und Entfernung der Spannfeder für das A2- und M4-Hinterschaftvisier ist integriert. Kanal zur Entfernung des Forward Assist in der Basis. "Bolt Carrier"-Stil Vertiefungen erlauben das Öffnen und Testen der Auswurffensterklappe.
Mehr...
Kundenbewertungen zu THE DEVICE MANUFACTURING LLC. Mk1Mod0 DEVICE
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,7
Rock solid(24.12.2016)
This thing is built rock solid and has worked on all of my milspec uppers. I like the rail on the bottom that you can use for scope mounting. If you are sick of poorly made/ar blocks, or build multiple ar's a year this is for you. Only down side is the coar
MK1MOD0 Device(26.08.2017)
I have tried a ton of tools and fixtures to install barrels and rails on the M16/M4 platform. This is the best tool I have used to date. Can't wait for the SR25/AR10 version to come out. Price is high but worth it. Way better than the reaction rod. Thank you.
The Device(29.06.2018)
I got this when it was new. Before it was at Brownell's. Heard about it locally and had to check it out.There have been some minor modifications since, all for the better, but mine is still going strong. Do you want to lock an upper in and do whatever you want to with it? This is the "Device" for you. Do you want to tweak a scope? flip it over. This thing is made to last, kinda taking us back to when craftsmanship was a thing. The price is up there, but do you want to buy one, or 4 of the same thing? Comes out to be cheaper in the end. I just re-read my post, and it sounds like a plug...well it kind of is. I friggin' love this thing. It does everything it is supposed to do. Put that barrel on with something else, then use this...You will know what I mean.
Artikel-Nr.: 100022745 THE DEVICE MANUFACTURING LLC. Mk1Mod0 DEVICE Herstellerproduktnummer: MK1MOD0DEVICE Profi-Qualität AR Upper Receiver Halterung. Robuste Halterung für jahrelangen intensiven Einsatz. Schnelle, intuitive Schnittstelle, die den schnellen Aufbau/Neuaufbau und die Reparatur des gesamten Upper Receivers der AR15/M16/M4-Familie von Gewehren/Karabinern/Pistolen ermöglicht. Entwickelt, um die Installation oder Entfernung aller Upper Receiver-Teile ohne Behinderung zu ermöglichen. Mit Blick auf Schienensysteme konzipiert, bietet das Gerät Platz für die meisten Schienensysteme, um Installation und Entfernung zu ermöglichen, während der Upper sicher gehalten wird. Hält den Receiver von innen über die Bolt Carrier Laufbahn und die Charging Handle Laufbahn mittels einer "T"-Schnittstelle. Vordere und hintere Verriegelungen werden zusammen mit der gesamten unteren Receiver-Fläche kontrolliert. Kompatibel mit milspec-dimensionierten Receivern und Billet-Receivern, die milspec-interne Abmessungen verwenden. Das Gerät kommt nicht in Kontakt mit der Laufverlängerung und ist nicht kalibersensitiv. Eine genaue Picatinny-Schiene mit Nummerierung ermöglicht eine schnelle Optik-Einrichtung oder Reparatur. Ein Lanyard wird bereitgestellt, um Teile griffbereit zu halten und das Herunterfallen zu verhindern. Ein interner, federbelasteter Detent ermöglicht die vertikale Anwendung ohne Kontrollverlust. Die Ausrichtung und Entfernung der Spannfeder für das A2- und M4-Hinterschaftvisier ist integriert. Kanal zur Entfernung des Forward Assist in der Basis. "Bolt Carrier"-Stil Vertiefungen erlauben das Öffnen und Testen der Auswurffensterklappe.
469.9EUR4469,90 €
*
Lieferzeit ca. 14-21 Tage. 4 Stk. im Großlager
Eigenschaften:Farbe: BlackFinish: Type III AndodizedHersteller/Modell: AR-15Material: Aluminum 7075-T6
Professional Grade AR Upper Receiver Fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the AR15/M16/M4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the Device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "T" interface. Front and rear lugs are controlled along with the entire bottom receiver flat. Compatible with milspec dimensioned receivers and billet receivers utilizing milspec internal dimensions. The Device does not contact barrel extension and is not caliber sensitive. Accurate Picatinny rail, with enumeration, allows for quick optic set-up or repair. A lanyard is provided to keep parts at-hand and help prevent dropping. An internal spring loaded detent allows for vertical application without loss of control. A2 and M4 rear sight tension spring alignment and removal is built in. Forward Assist removal channel in base. "Bolt carrier" style recesses allows Ejection Port door opening and testing.
Mehr...
Profi-Qualität AR Upper Receiver Halterung. Robuste Halterung für jahrelangen intensiven Einsatz. Schnelle, intuitive Schnittstelle, die den schnellen Aufbau/Neuaufbau und die Reparatur des gesamten Upper Receivers der AR15/M16/M4-Familie von Gewehren/Karabinern/Pistolen ermöglicht. Entwickelt, um die Installation oder Entfernung aller Upper Receiver-Teile ohne Behinderung zu ermöglichen. Mit Blick auf Schienensysteme konzipiert, bietet das Gerät Platz für die meisten Schienensysteme, um Installation und Entfernung zu ermöglichen, während der Upper sicher gehalten wird. Hält den Receiver von innen über die Bolt Carrier Laufbahn und die Charging Handle Laufbahn mittels einer "T"-Schnittstelle. Vordere und hintere Verriegelungen werden zusammen mit der gesamten unteren Receiver-Fläche kontrolliert. Kompatibel mit milspec-dimensionierten Receivern und Billet-Receivern, die milspec-interne Abmessungen verwenden. Das Gerät kommt nicht in Kontakt mit der Laufverlängerung und ist nicht kalibersensitiv. Eine genaue Picatinny-Schiene mit Nummerierung ermöglicht eine schnelle Optik-Einrichtung oder Reparatur. Ein Lanyard wird bereitgestellt, um Teile griffbereit zu halten und das Herunterfallen zu verhindern. Ein interner, federbelasteter Detent ermöglicht die vertikale Anwendung ohne Kontrollverlust. Die Ausrichtung und Entfernung der Spannfeder für das A2- und M4-Hinterschaftvisier ist integriert. Kanal zur Entfernung des Forward Assist in der Basis. "Bolt Carrier"-Stil Vertiefungen erlauben das Öffnen und Testen der Auswurffensterklappe.
Mehr...
Kundenbewertungen zu THE DEVICE MANUFACTURING LLC. Mk1Mod0 DEVICE
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,7
Rock solid(24.12.2016)
This thing is built rock solid and has worked on all of my milspec uppers. I like the rail on the bottom that you can use for scope mounting. If you are sick of poorly made/ar blocks, or build multiple ar's a year this is for you. Only down side is the coar
MK1MOD0 Device(26.08.2017)
I have tried a ton of tools and fixtures to install barrels and rails on the M16/M4 platform. This is the best tool I have used to date. Can't wait for the SR25/AR10 version to come out. Price is high but worth it. Way better than the reaction rod. Thank you.
The Device(29.06.2018)
I got this when it was new. Before it was at Brownell's. Heard about it locally and had to check it out.There have been some minor modifications since, all for the better, but mine is still going strong. Do you want to lock an upper in and do whatever you want to with it? This is the "Device" for you. Do you want to tweak a scope? flip it over. This thing is made to last, kinda taking us back to when craftsmanship was a thing. The price is up there, but do you want to buy one, or 4 of the same thing? Comes out to be cheaper in the end. I just re-read my post, and it sounds like a plug...well it kind of is. I friggin' love this thing. It does everything it is supposed to do. Put that barrel on with something else, then use this...You will know what I mean.