Durable Steel Magazines Resist Wear, Maintain Their Shape
Make the most of your 6.8mm chambered AR with long-wearing, extra-tough steel magazines. Hardened steel bodies with tempered feed lips hold their shape and won’t flex, bend, or deform. Tempered steel springs help maintain reliable feeding and function even with the heavier 6.8mm cartridge. Lightweight, Magpul brand, nylon composite followers are marked 6.8 to avoid confusion with AR magazines for other calibers. These magazines also work with the .224 Valkyrie and .22 Nosler Cartrdiges. Available in 10-, 15-, or 25-round capacity.
SPECS: Steel, blue. Fits. AR-15/M16 rifles chambered for 6.8 x 43mm Rem. SPC., .22 Nosler, and .224 Valkyrie
Mehr...
Langlebige Stahlmagazine widerstehen Verschleiß, behalten ihre Form
Nutze dein 6.8mm kalibriertes AR optimal mit langlebigen, besonders robusten Stahlmagazinen. Gehärtete Stahlkörper mit gehärteten Zuführlippen behalten ihre Form und werden nicht flexen, biegen oder verformen. Gehärtete Stahlfedern helfen dabei, zuverlässiges Fördern und Funktionieren auch mit der schwereren 6.8mm Patrone zu gewährleisten. Leichte, Magpul-Marken, Nylon-Composite-Follower sind mit 6.8 gekennzeichnet, um Verwechslungen mit AR-Magazinen für andere Kaliber zu vermeiden. Diese Magazine funktionieren auch mit den .224 Valkyrie und .22 Nosler Patronen. Erhältlich in 10-, 15- oder 25-Schuss Kapazität.
SPECS: Stahl, blau. Passend für AR-15/M16 Gewehre kalibriert für 6.8 x 43mm Rem. SPC., .22 Nosler und .224 Valkyrie
Mehr...
Kundenbewertungen zu PRECISION REFLEX, INC. AR-15 Mag 6.8 SPC, 22 Nosler, 224 Valkyrie 25rd Steel Blk
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,9
Nice, sturdy magazine(19.04.2010)
It was a little bit of a tight fit at first. Several reloads later it was accepted into the magwell perfrectly. Very nice item indeed.
High quality magazine, very well made.(25.02.2011)
I have been using PRI's 10 round mag in my Barrett REC7 on the bench with very good results so thought I would try the 15 round version. The 15 round mag is a nice compromise between the 10 round and the 25 round mag. Still does not protrude too much and works great shooting off of my bench. Also ideal for varmint hunting.
NEVER NEEDS CLEANING ---NOT!!!(02.06.2013)
Bought 2 of these from Brownells. Each functioned well the first time I used them. However, this magazine in NEXT TO IMPOSSIBLE to take apart and clean...even at home much less in the field. I have never seen the bottom plate on a mag SO DIFFICULT to remove. Both were the same. Assembly was just a difficult. I would not trust a gun I could not keep clean and the same applies to a magazine. I plan to use these mags until they become dirty or unserviceable and them I will toss them into the recycle bin.
Solid mag(08.11.2010)
A bit heavier than other 6.8 mags, but of a solid and well designed construction. They require a bit of a "break in" period to fit the full 25 without feeling like you are forcing too many rounds in, just load and fire off a couple of mags and you're good to go.
Best 6.8mm Magazine On Market!(12.02.2012)
This is the best manufactured magazine out on the market. Engineered for proper functions and withstand stress. After review and tests, it is the only one I trust with my rifle when my life depends on it to function properly.
Best You Can Buy - They Never Fail(15.02.2012)
I have only tried one other brand of 6.8 mag; it was supplied with the gun. Not bad but not 100%. I have put 9,000 rounds through 4 of these mags and they just work. If you have an AR in 6.8, these are the mags you need. Don't risk your money on aproduct that is only 98% as good. Guns require 100% reliability and Precision Reflex gives you that.
2 out of 6 didn't work(02.04.2012)
I took six of these magazines to the range four worked ok. One wouldn't seat in the magwell, and one froze with three rounds still in it.
Magazine falls out of rifle(03.08.2013)
I can't recommend this product and will be returning to Brownells. If mag is bumped, it falls out of rifle. If rifle is fired, mag falls out. Mag body is too small for mag well. Never a problem with other mags in this lower. The mag I bought is defective.
Will buy more.(23.02.2011)
I am 100% satisfied with this product. Fits perfectly in my Barrett REC7 6.8. Fits snug yet drops free even empty, you get what you pay for. Will buy more from PRI.
Welded into one piece(16.09.2011)
I was getting along with C-mags which are folded over and tack welded. These PRI magazines are welded into one piece without any overlapping folds. So you have a little more room for a longer COL and they have no sheet metal edges. The bottoms are much more solid as well.
Artikel-Nr.: 714000001 PRECISION REFLEX, INC. AR-15 Mag 6.8 SPC, 22 Nosler, 224 Valkyrie 25rd Steel Blk Nutze dein 6.8mm kalibriertes AR optimal mit langlebigen, besonders robusten Stahlmagazinen. Gehärtete Stahlkörper mit gehärteten Zuführlippen behalten ihre Form und werden nicht flexen, biegen oder verformen. Gehärtete Stahlfedern helfen dabei, zuverlässiges Fördern und Funktionieren auch mit der schwereren 6.8mm Patrone zu gewährleisten. Leichte, Magpul-Marken, Nylon-Composite-Follower sind mit 6.8 gekennzeichnet, um Verwechslungen mit AR-Magazinen für andere Kaliber zu vermeiden. Diese Magazine funktionieren auch mit den .224 Valkyrie und .22 Nosler Patronen. Erhältlich in 10-, 15- oder 25-Schuss Kapazität.
81.9EUR181,90 €
*
ist ein Produkt, das telefonisch bestellt werden muss.
Made in USA
US-Exportklassifizierung: 0A501.d
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Artikel-Nr.: 714000002 PRECISION REFLEX, INC. AR-15 Mag 6.8 SPC, 22 Nosler, 224 Valkyrie 10rd Steel Blk Herstellerproduktnummer: NONE090222553156 Nutze dein 6.8mm kalibriertes AR optimal mit langlebigen, besonders robusten Stahlmagazinen. Gehärtete Stahlkörper mit gehärteten Zuführlippen behalten ihre Form und werden nicht flexen, biegen oder verformen. Gehärtete Stahlfedern helfen dabei, zuverlässiges Fördern und Funktionieren auch mit der schwereren 6.8mm Patrone zu gewährleisten. Leichte, Magpul-Marken, Nylon-Composite-Follower sind mit 6.8 gekennzeichnet, um Verwechslungen mit AR-Magazinen für andere Kaliber zu vermeiden. Diese Magazine funktionieren auch mit den .224 Valkyrie und .22 Nosler Patronen. Erhältlich in 10-, 15- oder 25-Schuss Kapazität.
60.9EUR060,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Artikel-Nr.: 714000010 PRECISION REFLEX, INC. AR-15 Mag 6.8 SPC, 22 Nosler, 224 Valkyrie 15rd Steel Blk Herstellerproduktnummer: 056806090222553149 Nutze dein 6.8mm kalibriertes AR optimal mit langlebigen, besonders robusten Stahlmagazinen. Gehärtete Stahlkörper mit gehärteten Zuführlippen behalten ihre Form und werden nicht flexen, biegen oder verformen. Gehärtete Stahlfedern helfen dabei, zuverlässiges Fördern und Funktionieren auch mit der schwereren 6.8mm Patrone zu gewährleisten. Leichte, Magpul-Marken, Nylon-Composite-Follower sind mit 6.8 gekennzeichnet, um Verwechslungen mit AR-Magazinen für andere Kaliber zu vermeiden. Diese Magazine funktionieren auch mit den .224 Valkyrie und .22 Nosler Patronen. Erhältlich in 10-, 15- oder 25-Schuss Kapazität.
Durable Steel Magazines Resist Wear, Maintain Their Shape
Make the most of your 6.8mm chambered AR with long-wearing, extra-tough steel magazines. Hardened steel bodies with tempered feed lips hold their shape and won’t flex, bend, or deform. Tempered steel springs help maintain reliable feeding and function even with the heavier 6.8mm cartridge. Lightweight, Magpul brand, nylon composite followers are marked 6.8 to avoid confusion with AR magazines for other calibers. These magazines also work with the .224 Valkyrie and .22 Nosler Cartrdiges. Available in 10-, 15-, or 25-round capacity.
SPECS: Steel, blue. Fits. AR-15/M16 rifles chambered for 6.8 x 43mm Rem. SPC., .22 Nosler, and .224 Valkyrie
Mehr...
Langlebige Stahlmagazine widerstehen Verschleiß, behalten ihre Form
Nutze dein 6.8mm kalibriertes AR optimal mit langlebigen, besonders robusten Stahlmagazinen. Gehärtete Stahlkörper mit gehärteten Zuführlippen behalten ihre Form und werden nicht flexen, biegen oder verformen. Gehärtete Stahlfedern helfen dabei, zuverlässiges Fördern und Funktionieren auch mit der schwereren 6.8mm Patrone zu gewährleisten. Leichte, Magpul-Marken, Nylon-Composite-Follower sind mit 6.8 gekennzeichnet, um Verwechslungen mit AR-Magazinen für andere Kaliber zu vermeiden. Diese Magazine funktionieren auch mit den .224 Valkyrie und .22 Nosler Patronen. Erhältlich in 10-, 15- oder 25-Schuss Kapazität.
SPECS: Stahl, blau. Passend für AR-15/M16 Gewehre kalibriert für 6.8 x 43mm Rem. SPC., .22 Nosler und .224 Valkyrie
Mehr...
Kundenbewertungen zu PRECISION REFLEX, INC. AR-15 Mag 6.8 SPC, 22 Nosler, 224 Valkyrie 25rd Steel Blk
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,9
Nice, sturdy magazine(19.04.2010)
It was a little bit of a tight fit at first. Several reloads later it was accepted into the magwell perfrectly. Very nice item indeed.
High quality magazine, very well made.(25.02.2011)
I have been using PRI's 10 round mag in my Barrett REC7 on the bench with very good results so thought I would try the 15 round version. The 15 round mag is a nice compromise between the 10 round and the 25 round mag. Still does not protrude too much and works great shooting off of my bench. Also ideal for varmint hunting.
NEVER NEEDS CLEANING ---NOT!!!(02.06.2013)
Bought 2 of these from Brownells. Each functioned well the first time I used them. However, this magazine in NEXT TO IMPOSSIBLE to take apart and clean...even at home much less in the field. I have never seen the bottom plate on a mag SO DIFFICULT to remove. Both were the same. Assembly was just a difficult. I would not trust a gun I could not keep clean and the same applies to a magazine. I plan to use these mags until they become dirty or unserviceable and them I will toss them into the recycle bin.
Solid mag(08.11.2010)
A bit heavier than other 6.8 mags, but of a solid and well designed construction. They require a bit of a "break in" period to fit the full 25 without feeling like you are forcing too many rounds in, just load and fire off a couple of mags and you're good to go.
Best 6.8mm Magazine On Market!(12.02.2012)
This is the best manufactured magazine out on the market. Engineered for proper functions and withstand stress. After review and tests, it is the only one I trust with my rifle when my life depends on it to function properly.
Best You Can Buy - They Never Fail(15.02.2012)
I have only tried one other brand of 6.8 mag; it was supplied with the gun. Not bad but not 100%. I have put 9,000 rounds through 4 of these mags and they just work. If you have an AR in 6.8, these are the mags you need. Don't risk your money on aproduct that is only 98% as good. Guns require 100% reliability and Precision Reflex gives you that.
2 out of 6 didn't work(02.04.2012)
I took six of these magazines to the range four worked ok. One wouldn't seat in the magwell, and one froze with three rounds still in it.
Magazine falls out of rifle(03.08.2013)
I can't recommend this product and will be returning to Brownells. If mag is bumped, it falls out of rifle. If rifle is fired, mag falls out. Mag body is too small for mag well. Never a problem with other mags in this lower. The mag I bought is defective.
Will buy more.(23.02.2011)
I am 100% satisfied with this product. Fits perfectly in my Barrett REC7 6.8. Fits snug yet drops free even empty, you get what you pay for. Will buy more from PRI.
Welded into one piece(16.09.2011)
I was getting along with C-mags which are folded over and tack welded. These PRI magazines are welded into one piece without any overlapping folds. So you have a little more room for a longer COL and they have no sheet metal edges. The bottoms are much more solid as well.