Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

BATTLE ARMS DEVELOPMENT INC.
AR-15 INVESTMENT CAST ENHANCED LOWER PARTS KIT

810033781261 100025392
The Easy-To-Install Upgrades That ll Make Your AR Easier To Operate Safely
The Battle Arms Enhanced Lower Parts Kit contains three components that will make operation of your AR-15’s controls faster, easier, and smoother, so you’ll have better control over your rifle, especially in speed-critical situations. This kit contains 3 important Battle Arms parts: BAD-E4S-IC Enhanced Single-Side Safety Selector has the deeply textured, slightly oversized paddle of the ambidextrous "BAD-ASS" selector, but only on the right side. For shooters who do not need ambidextrous controls, this selector helps them engage/disengage the safety quickly. This is a 2-position semi-auto safety with 0 deg. & 90 deg. positions. BAD-EMC-IC Enhanced Magazine Catch is more robust and lighter than the mil-spec AR-15 mag catch. Its shorter post causes the mag release button to sit lower in the receiver, making it less likely you’ll accidentally bump it and dump your mag at the wrong moment. Compatible with the standard mil-spec mag release button, as well as Battle Arms BAD-EMR, BAD-EMMR, and similar buttons. BAD-EBC-IC Enhanced Bolt Catch offers a much larger contact surface than the standard mil-spec part, so it’s easier to locate the control and release the bolt when you’re under stress. Pronounced serrations running in two directions provide a non-slip contact surface, while the raised T-shaped heel aids in secure bolt lock back. Compatible with Norgon Ambi-Catch. Bolt catch ONLY - roll pin, detent & spring NOT included. All three components share the same sturdy construction to ensure years of reliable service: Easy-to-install drop-in replacements for factory parts 8620 carbon steel (investment cast), heat-treated for hardness Matte black phosphate finish matches most black-anodized receiver Fit standard mil-spec AR-15 lower receiver This Enhanced Lower Parts Kit consists only of these three parts, so it’s not a complete LPK with all the small internal parts, but don’t worry, Brownells sells a number of those. What the Battle Arms kit will do is improve your ability to operate your AR-15 quickly, reliably, and safely.
52.9 52.9 1 EUR
Artikel-Nr.: 100025392
BATTLE ARMS DEVELOPMENT INC. AR-15 Investment Cast Enhanced Lower Parts Kit
Herstellerproduktnummer: BADLPKPK3 810033781261 Das Battle Arms Enhanced Lower Parts Kit enthält drei Komponenten, die die Bedienung der Kontrollen deines AR-15 schneller, einfacher und glatter machen, sodass du eine bessere Kontrolle über dein Gewehr hast, besonders in geschwindigkeitskritischen Situationen. Dieses Kit enthält 3 wichtige Battle Arms Teile: BAD-E4S-IC Enhanced Single-Side Safety Selector besitzt das stark texturierte, leicht vergrößerte Paddel des beidhändigen "BAD-ASS" Selektors, jedoch nur auf der rechten Seite. Für Schützen, die keine beidhändigen Kontrollen benötigen, hilft dieser Selektor dabei, die Sicherung schnell zu aktivieren/deaktivieren. Dies ist eine 2-Positionen Halbautomatik-Sicherung mit 0 Grad & 90 Grad Positionen. BAD-EMC-IC Enhanced Magazine Catch ist robuster und leichter als der mil-spec AR-15 Magazinfang. Sein kürzerer Posten bewirkt, dass der Magazinauslöseknopf tiefer im Receiver sitzt, was die Wahrscheinlichkeit verringert, dass du ihn versehentlich stößt und dein Magazin im falschen Moment verlierst. Kompatibel mit dem standardmäßigen mil-spec Magazinauslöseknopf, sowie Battle Arms BAD-EMR, BAD-EMMR und ähnlichen Knöpfen. BAD-EBC-IC Enhanced Bolt Catch bietet eine viel größere Kontaktfläche als das standardmäßige mil-spec Teil, sodass es einfacher ist, die Kontrolle zu finden und den Verschluss zu lösen, wenn du unter Stress stehst. Ausgeprägte Serrationen in zwei Richtungen bieten eine rutschfeste Kontaktfläche, während der erhöhte T-förmige Absatz eine sichere Verriegelung des Verschlusses unterstützt. Kompatibel mit Norgon Ambi-Catch. Nur der Bolt Catch - Rollstift, Detent & Feder NICHT enthalten. Alle drei Komponenten teilen die gleiche robuste Konstruktion, um jahrelangen zuverlässigen Service zu gewährleisten: Einfach zu installierende Drop-in-Ersatzteile für Werkskomponenten 8620 Kohlenstoffstahl (Investmentguss), wärmebehandelt für Härte Matte schwarze Phosphatbeschichtung passt zu den meisten schwarz-anodisierten Receivern Passend für standardmäßige mil-spec AR-15 Lower Receiver Dieses Enhanced Lower Parts Kit besteht nur aus diesen drei Teilen, es ist also kein komplettes LPK mit allen kleinen internen Teilen, aber keine Sorge, Brownells verkauft eine Reihe davon. Was das Battle Arms Kit tun wird, ist deine Fähigkeit zu verbessern, dein AR-15 schnell, zuverlässig und sicher zu bedienen.
52.9 EUR 3 52,90 € *
Lieferzeit ca. 14-21 Tage.
3 Stk. im Großlager
Eigenschaften: Hersteller/Modell: AR-15

Eigenschaften

Hersteller/Modell: AR-15 Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 51mm Versandlänge: 102mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x



The Easy-To-Install Upgrades That ll Make Your AR Easier To Operate Safely
The Battle Arms Enhanced Lower Parts Kit contains three components that will make operation of your AR-15’s controls faster, easier, and smoother, so you’ll have better control over your rifle, especially in speed-critical situations. This kit contains 3 important Battle Arms parts: BAD-E4S-IC Enhanced Single-Side Safety Selector has the deeply textured, slightly oversized paddle of the ambidextrous "BAD-ASS" selector, but only on the right side. For shooters who do not need ambidextrous controls, this selector helps them engage/disengage the safety quickly. This is a 2-position semi-auto safety with 0 deg. & 90 deg. positions. BAD-EMC-IC Enhanced Magazine Catch is more robust and lighter than the mil-spec AR-15 mag catch. Its shorter post causes the mag release button to sit lower in the receiver, making it less likely you’ll accidentally bump it and dump your mag at the wrong moment. Compatible with the standard mil-spec mag release button, as well as Battle Arms BAD-EMR, BAD-EMMR, and similar buttons. BAD-EBC-IC Enhanced Bolt Catch offers a much larger contact surface than the standard mil-spec part, so it’s easier to locate the control and release the bolt when you’re under stress. Pronounced serrations running in two directions provide a non-slip contact surface, while the raised T-shaped heel aids in secure bolt lock back. Compatible with Norgon Ambi-Catch. Bolt catch ONLY - roll pin, detent & spring NOT included. All three components share the same sturdy construction to ensure years of reliable service: Easy-to-install drop-in replacements for factory parts 8620 carbon steel (investment cast), heat-treated for hardness Matte black phosphate finish matches most black-anodized receiver Fit standard mil-spec AR-15 lower receiver This Enhanced Lower Parts Kit consists only of these three parts, so it’s not a complete LPK with all the small internal parts, but don’t worry, Brownells sells a number of those. What the Battle Arms kit will do is improve your ability to operate your AR-15 quickly, reliably, and safely.
Newsletter