Ihr Warenkorb ist leer.

Warenkorb

TIMNEY
AR-15 DROP-IN TRIGGER MODULE SKELETON SHOE

081950661190 883000026

Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout.

Mehr...

Das selbstständige Modul ist bereit zur Installation in deinem Small-Pin AR und bietet einen außergewöhnlich sanften, präzisen und ruckfreien Single-Stage Abzug, der sich mehr wie bei einem traditionellen Repetiergewehr als bei einem Kampfgewehr anfühlt. 100% einsetzbar ohne Waffenschmiedearbeiten, Anpassungen oder Einstellungen. Alle Komponenten sind in einem leichten, aluminiumlegierten Gehäuse eingeschlossen. Der Hammer ist mittels Drahterodieren aus S7 Werkzeugstahl gefertigt, der Härte bietet, um Verschleiß zu widerstehen, und überlegene Schlagfestigkeit, um intensiven Gebrauch ohne Absplittern oder Brechen zu überstehen. Andere Komponenten sind aus A2 Werkzeugstahl EDM-geschnitten und dann auf Rc 56-60 wärmebehandelt für eine lange Lebensdauer. Präzisionsgeschliffene Eingriffsflächen sorgen für zuverlässige Funktionalität und ein scharfes, sauberes Hammerablassen. Die Installation erfolgt mit den originalen Hammer-/Abzugstiften deines Gewehrs; das eigentumsrechtliche Design verhindert das Herauswandern der Stifte.

Mehr...

Kundenbewertungen zu TIMNEY AR-15 Small Pin Trigger Module, 3 lbs, Skeleton Shoe

Anzahl der Bewertungen: 12
Von brownells.com: 12
Durchschnittliche Bewertung: 4,4

Happy camper (07.09.2013)

Ordered on Sat over Labor Day weekend shipped Tue arrived Thu (great), watched a couple of vids, installed very easy no issues, went to the range on Sat shot like a dream, that's good cause my old trigger is in a pile O pieces in a bag somewhere
Sig Sauer M400 SRP
Best looking AR on the block

Good trigger (28.10.2013)

Opperation of the trigger is phenominal! Butter smooth, nice clean break, no take up. Giving it 4 stars for one flaw...the retention system for the trigger and hammer pins loosens after firing, so after a day at the range these pins fall free out with no resistence. Gave it a couple chances, figured maybe a break in thing, but now after 3 times of the same problem I have had to take corrective action. A little loctite on the pressure screws that are supposed to hold the pins in has helped prevent them from loosening, but I also got some anti-walk pins that will further capture the hammer/trigger pins. Product works well, but for a gun that see's hard field use there are some reliability issues that if not addressed can leave you hanging.

Out Standing Product!!! (20.06.2016)

this is my forth install

easy install with great results! Best change and investment you can make on an AR15, AR10 or Tavor!

Great In The Desert! (16.01.2011)

I have a Colt 6721. The trigger is notorious for being sloppy, and this one is no exception. In lieu of running 2500+ rounds thru it to 'loosen' it up, I put this Timney in. What a difference! Tight, crisp 3-lb. pull, easy to adjust to. I would definitely recommend this trigger, but think twice about wearing gloves.

This is an excellent Trigger (20.01.2011)

I have had this trigger installed on a very early S&W MP15T for several years. Thousands of rounds have been fired using the trigger with no problems, failures or issues of any kind.This is an excllent product and a great imporvement over the factory trigger.

My trigger was factory installed by the S&W Performance Center gunsmiths, so I can't comment on ease of installation.

Awesome trigger (08.07.2011)

I bought this trigger assembly at the NRA convention here in Charlotte a year or so ago. Unfortunately Brownells did not offer it yet. The assembly is extremely simple to install and is by far the best trigger I have ever felt on any AR style platform (its also the best looking). It is currently in my Stag 2T and I have had no issues. I would also not recomend this trigger to anyone shooting with gloves of any kind.

Timney AR-15 Trigger (25.09.2011)

Superb fit and finish. Dead easy install; not sure why some folks find it difficult. I'd rate it a 1.5 on the scale of 1 to 5 with 5 being "bring in a pro". Read the enclosed instructions, it's very straightforward.

Light trigger, crisp, you'll want to be thoughtful using gloves because it has very little take up- it breaks with very little pressure.

I would have preferred a two stage and that's what I thought I ordered, but this will work super well.

Also- I loved the spiritual thought included! Great to see that.

Strong recommend!

Great Trigger with surprises (08.08.2012)

A very good drop in trigger. But, if you're actually building a rifle and not merely replacing your trigger group - make sure you order the pins as Timney doesn't supply any with their 250.00 trigger! My wilson combat two stage I used on another build came with the pins.

Much better (02.09.2013)

Installed on a Colt cr6724 after trying the J&P spring kit on the factory trigger. Now is feels like a rifle trigger should. Wanted a trigger feel like a bolt action. Very pleased. Easy to install but I do not like the set screws to hold the pins in.

Excelent drop in trigger group (29.11.2013)

Installation was very easy, just follow the steps and dont over tighten the locking screws. (my polymer receiver didn't like it, I could see where the set screws were pushing from the inside), but my I later put this in my forged aluminum receiver and it works great!! Trigger is super crisp, and the 3lb pull feels perfect. very short reset makes follow up shots quick.

Expensive and not worth it (25.12.2014)

Just trying some different triggers in my AR builds

Quality is good but the skeleton trigger has sharp

edges on it, so unless you always wear gloves

your trigger finger will be cut up, the 3ILb pull

is nice for fast shooting, but the trigger is set

up so close to the edge that by pressing on the

trigger with the safety on you can still drop the

hammer, which is why it didn't stay in a gun

very long, maybe the 4 ILb trigger will be better.

Timney on the frontline of triggers (20.05.2015)

One of the best drop in triggers and its number 1 in my book. I have Timney in all my AR platforms 10, 15's never had any issues just a great single stage crisp drop in trigger

Lesen Sie 12 weitere Bewertungen bei brownells.com

484.9 484.9 1 EUR

Artikel-Nr.: 883000026
TIMNEY AR-15 Small Pin Trigger Module, 3 lbs, Skeleton Shoe
Herstellerproduktnummer: 661S 081950661190 Das selbstständige Modul ist bereit zur Installation in deinem Small-Pin AR und bietet einen außergewöhnlich sanften, präzisen und ruckfreien Single-Stage Abzug, der sich mehr wie bei einem traditionellen Repetiergewehr als bei einem Kampfgewehr anfühlt. 100% einsetzbar ohne Waffenschmiedearbeiten, Anpassungen oder Einstellungen. Alle Komponenten sind in einem leichten, aluminiumlegierten Gehäuse eingeschlossen. Der Hammer ist mittels Drahterodieren aus S7 Werkzeugstahl gefertigt, der Härte bietet, um Verschleiß zu widerstehen, und überlegene Schlagfestigkeit, um intensiven Gebrauch ohne Absplittern oder Brechen zu überstehen. Andere Komponenten sind aus A2 Werkzeugstahl EDM-geschnitten und dann auf Rc 56-60 wärmebehandelt für eine lange Lebensdauer. Präzisionsgeschliffene Eingriffsflächen sorgen für zuverlässige Funktionalität und ein scharfes, sauberes Hammerablassen. Die Installation erfolgt mit den originalen Hammer-/Abzugstiften deines Gewehrs; das eigentumsrechtliche Design verhindert das Herauswandern der Stifte.

484.9 EUR 7 484,90 € *

Lieferzeit ca. 14-21 Tage.
7 Stk. im Großlager

Eigenschaften: Art: Non-Adjustable Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Non-Adjustable Hersteller/Modell: AR-15 Versandgewicht: 0,091kg Versandhöhe: 36mm Versandbreite: 79mm Versandlänge: 104mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c

Mehr...

Kundenbewertungen zu TIMNEY AR-15 Small Pin Trigger Module, 3 lbs, Skeleton Shoe

Anzahl der Bewertungen: 12
Von brownells.com: 12
Durchschnittliche Bewertung: 4,4

Happy camper (07.09.2013)

Good trigger (28.10.2013)

Out Standing Product!!! (20.06.2016)

this is my forth install

easy install with great results! Best change and investment you can make on an AR15, AR10 or Tavor!

Great In The Desert! (16.01.2011)

This is an excellent Trigger (20.01.2011)

Awesome trigger (08.07.2011)

Timney AR-15 Trigger (25.09.2011)

Great Trigger with surprises (08.08.2012)

Much better (02.09.2013)

Excelent drop in trigger group (29.11.2013)

Expensive and not worth it (25.12.2014)

Timney on the frontline of triggers (20.05.2015)

One of the best drop in triggers and its number 1 in my book. I have Timney in all my AR platforms 10, 15's never had any issues just a great single stage crisp drop in trigger

Lesen Sie 12 weitere Bewertungen bei brownells.com

Kunden kauften auch

MIDWEST INDUSTRIES, INC. Keymod Rail Picatinny Aluminum Black 2.1"
MIDWEST INDUSTRIES, INC. AR-15 PICATINNY KEYMOD RAIL ALUMINUM

MIDWEST INDUSTRIES

Auf Lager

38,90 € * 38,90 € - 44,90 €*

Accessory Rails

HARRIS 1A2-BR Bipod Sling Swivel Mount 6-9" Black
HARRIS 1A2-BR BIPOD SLING SWIVEL MOUNT

HARRIS

Auf Lager

138,90 € *

Zweibeine

MAGPUL Schienenabdeckung Handschutz, Picatinny, Polymer, schwarz, 6.25"
MAGPUL Schienenabdeckung Handschutz, Picatinny, Polymer

MAGPUL

Auf Lager

19,50 € *

Rail Covers

4,3

DOUBLE STAR Ambidextrous Sling Adapter Plate
DOUBLE STAR AR-15/M16 SLING ADAPTER END PLATE

DOUBLE STAR

Auf Lager

19,90 € * 19,90 € - 23,90 €*

taktische Riemenbügel

3,4

TROY INDUSTRIES, INC. Battle Rail Cover 3-pk Picatinny Polymer Black 6"
TROY INDUSTRIES, INC. AR-15 PICATINNY BATTLE RAIL COVER 3-PK POLYMER

TROY INDUSTRIES

Auf Lager

34,90 € * 34,90 € - 35,90 €*

Rail Covers

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.