Eigenschaften
- Größe:
4 oz
- Menge: 0,118 l
- Versandgewicht: 0,113kg
- Versandhöhe: 97mm
- Versandbreite: 43mm
- Versandlänge: 41mm
- UPC: 667739980050
Nicht verfügbar.
Artikel-Nr.: 509350040
Herst.-Nr.: BTCC-35004
Benachrichtigt werden, sobald verfügbar? Hier klicken 24.9 EUREinstufung gemäß Verordnung (EG) Nr. 1272/2008 (CLP-VO)
Signalwort: Achtung
- Gefahrenhinweise
H315 Verursacht Hautreizungen.
H317 Kann allergische Hautreaktionen verursachen.
H318 Verursacht schwere Augenschäden.
H411 Giftig für Wasserorganismen, mit langfristiger Wirkung.
--> Datenblatt Inhaltsstoffe <--
Technologisch fortschrittliche, biologisch abbaubare Formel und dennoch stark genug, um die härtesten Verschmutzungen durch Kohlenstoff, Blei und Moly in nur wenigen Sekunden zu entfernen. Ideal für Gewehrlauf, Schlagflächen, Blitzschutz, Kompensatoren, Schalldämpfer, Kammerkehlen, Revolverzylinder, Gaskolben und jeden anderen Ort, an dem extreme Kohlenstoffverschmutzung auftritt. Neutralisiert und entfernt auch ätzende Salze, die in überschüssiger Militärmunition und Schwarzpulver enthalten sind. Die Tiefenreinigung dringt leicht in kleinste Spalten und andere schwer zugängliche Bereiche ein und hinterlässt stark verschmutzte Teile, die fabrikneu aussehen. Für hartnäckige Verschmutzungen einfach ein paar Minuten in C4 Carbon Remover einweichen und dann abwischen oder trocknen. Konditioniert das Metall, um eine spätere Anhäufung zu verhindern. Nicht brennbare, ordnungslose, ammoniakfreie Lösung ist für den Innenbereich unbedenklich.
TECHNISCHE DATEN: 4 fl. oz. (118 ml) Quetschflasche oder 16 fl. oz. (473 ml) Kunststoffflasche.
4 oz
Outstanding Carbon remover 26.02.2018
Every revolver shooter will love this product. I bought it for the sole purpose to remove the very stubborn carbon fouling on the end of the revolver cylinder and top strap. After removing the cylinder I cut a small hole in a large patch and placed it over the ejection rod so the patch covered the front face. With the cylinder sitting upright I soaked the patch with the product and let it sit overnight. The next morning I was able to wipe the carbon off with a Q-tip !!! No scrubbing needed that might damage the cylinder exit ports. I found it works best if you let the chemical soak into the carbon. Don't expect magical results in a few seconds.
The second area was the carbon build-up inside the cylinder. I wadded a patch into each of the six cavities and again soaked the patches and let set. A couple of strokes with a bore brush and patches and it was clean.
Like Magic! 08.08.2017
Of all of the carbon solvents I have tried (and I have tried many, both old school and new school) this is simply the best of the best. It has a slight orange-ish scent to it and doesn't irritate your skin like a lot of old school cleaners like Hoppe's. For someone like me who wears contact lenses, this is really important as solvents like Hoppe's contain kerosene and petroleum distillates which don't wash off the hands nicely, even with alcohol-based hand sanitizer. What this means is that I can ruin a pair of contacts by using said solvent. With this stuff no worries, it washes off with hand soap and is like the Dawn of guns, it cleans what no other solvent will and without being harmful to the user.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.