Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland
100004369
For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

98.9 98.9 1 EUR
Artikel-Nr.: 100004369
10-8 PERFORMANCE LLC Armorer's Block
Herstellerproduktnummer: BLOCK Praktischer Bench Block aus extrem robustem, glasfaserverstärktem Nylon unterstützt 1911 Pistolenkomponenten, sodass eine Vielzahl von Reparatur-, Montage-/Demontage- und Präzisionsarbeiten schnell und einfach durchgeführt werden können. Hält das Frame sicher auf der Seite, sodass daran gearbeitet werden kann, ohne das Finish zu beschädigen. Ermöglicht die Überprüfung des Hammer/Sear-Eingriffs, das Entfernen des Hammer Strut Pins, das Entfernen des Mainspring Housing und hält den Thumb Safety für einfaches Feilen der Sear Stop Stud Engaging Surface. Dient zum Spannen des Extractors abseits vom Slide, sodass keine Kratzer am Slide riskiert werden und hält den Extractor während des Feilens und Honens der Claw fest. Hält den Barrel während der Entfernung des Link Pins, mit Blindlöchern, um die Pins aufzufangen, damit sie nicht verloren gehen. Das Frame kann sogar zwischen zwei Blöcken platziert und in einem Schraubstock eingespannt werden, um das Slide Fitting vorzunehmen.
98.9 EUR 0 98,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften: Hersteller/Modell: 1911 Modell: Government, Commander, Officers

Eigenschaften

Hersteller/Modell: 1911 Modell: Commander,Government,Officers Versandgewicht: 0,363kg Versandhöhe: 38mm Versandbreite: 122mm Versandlänge: 107mm

Artikeldetails

Made in USA



For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

Newsletter