Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fits: S&W M&P S&W M&P 2.0 S&W M&P 22
Mehr...
Entferne einfach das hintere Visier deiner Waffe und ersetze es durch die EGW Montage, um dein Trijicon RMR Red-Dot Visier anzubringen. Du kannst die Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung: Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwanzschraube Ziehe die Feststellschraube an (falls zutreffend) Platziere das Red-Dot Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen Red-Dot Visier und Sight Mount erleichtert die Demontage und hält Loctite vom Red-Dot Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit 15in/lbs an Für die Installation der mitgelieferten Schrauben wird ein 5/64'' Inbusschlüssel benötigt. Diese Montage passt nicht für: S&W M&P S&W M&P 2.0 S&W M&P 22
Mehr...
76.976.91EUR
Artikel-Nr.: 296000711 EGW SIGHT MOUNT FOR TRIJICON RMR FITS S&W M&P SHIELD EZ BLACK Herstellerproduktnummer: 49542841370117574 Entferne einfach das hintere Visier deiner Waffe und ersetze es durch die EGW Montage, um dein Trijicon RMR Red-Dot Visier anzubringen. Du kannst die Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung: Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwanzschraube Ziehe die Feststellschraube an (falls zutreffend) Platziere das Red-Dot Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen Red-Dot Visier und Sight Mount erleichtert die Demontage und hält Loctite vom Red-Dot Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit 15in/lbs an Für die Installation der mitgelieferten Schrauben wird ein 5/64'' Inbusschlüssel benötigt. Diese Montage passt nicht für: S&W M&P S&W M&P 2.0 S&W M&P 22
76.9EUR176,90 €
*
Lieferzeit ca. 14-21 Tage. 1 Stk. im Großlager
Eigenschaften:Art: TacticalBasenanzahl: 1-PieceFarbe: BlackHersteller/Modell: Smith & WessonMaterial: AluminumModell: M&P9 Shield EZ, M&P 380 Shield EZ
Einfacher Austausch des hinteren Visiers durch die EGW Montage zur Anbringung eines Trijicon RMR Red-Dot Visiers.
Montagematerial inklusive; Installation erfordert einen 5/64'' Inbusschlüssel und blaues Loctite.
Kompatibel mit S&W M&P9 Shield EZ und M&P 380 Shield EZ, aber nicht mit anderen S&W M&P Modellen.
Eigenschaften
Art:
Tactical
Basenanzahl:
1-Piece
Farbe:
Black
Hersteller/Modell:
Smith & Wesson
Material:
Aluminum
Modell:
M&P9 Shield EZ,M&P 380 Shield EZ
Versandgewicht: 0,045kgVersandhöhe: 25mmVersandbreite: 76mmVersandlänge: 140mm
Artikeldetails
Made in USA
Montiere dein Trijicon RMR Red-Dot Visier einfach und schnell mit der EGW Sight Mount für S&W M&P Shield EZ. Perfekt für taktische Einsätze! 🛠️🔫 Erfahre mehr.
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fits: S&W M&P S&W M&P 2.0 S&W M&P 22
Mehr...
Entferne einfach das hintere Visier deiner Waffe und ersetze es durch die EGW Montage, um dein Trijicon RMR Red-Dot Visier anzubringen. Du kannst die Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung: Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwanzschraube Ziehe die Feststellschraube an (falls zutreffend) Platziere das Red-Dot Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen Red-Dot Visier und Sight Mount erleichtert die Demontage und hält Loctite vom Red-Dot Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit 15in/lbs an Für die Installation der mitgelieferten Schrauben wird ein 5/64'' Inbusschlüssel benötigt. Diese Montage passt nicht für: S&W M&P S&W M&P 2.0 S&W M&P 22