Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has green insert, rear has two orange inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.
Mehr...
Direktersatz für Werksvisiere bei beliebten Handfeuerwaffen, die Umgebungslicht sammeln für eine hervorragende Sichtbarkeit. Je mehr Licht, desto heller leuchten die Stäbe. 3-Punkt-Visierbild; das Korn hat einen grünen Einsatz, das hintere Visier zwei orange Einsätze. Die Fire Sights für Waffen, die ursprünglich mit festen Visieren ausgestattet waren, sind ebenfalls fest. War die Waffe ursprünglich mit einem einstellbaren hinteren Visier ausgestattet, ist das Fire Sight verstellbar.
Mehr...
Kundenbewertungen zu WILLIAMS GUN SIGHT S&W M&P Bodyguard 380 Fire Sight Set
Anzahl der Bewertungen: 4
Von brownells.com: 3
Durchschnittliche Bewertung: 2,3
Cheap(04.08.2017)
I want to start off by saying I was using a sight pusher that is designed to install iron sights on M&P Shields when working with these sights. The front sight went on with ease. However, the rear sight was a complete 360 from from the front sight. It was going on with normal resistance (similar to the front sight). The normal resistance marred the rear sight (there was no marring to the front). Then I used a brass punch to punch it out, because sight pusher already damaged the rear. The brass punch damaged the other side of the sight. I believe they used some of the cheapest alluminum to make the rear sight (it shouldn't of marred that bad). I know this because I have worked with many sights before.
half n half(29.08.2013)
I really like these sights my complaints are the image shows red front green rear the sights I received were opposite red/orange rear green front is this a huge deal for me no but for some people it would be a huge issue as the warmer color is the one that will attract your eye for focal plane another complaint is the sides were impossible to drive in without damaging due to a angled downward toward pistol rear sight attempted using a dowel but sight split it due to sharp edge also sights are much more narrow if you center them no problem but if they need adjusted expecially away from ejection port they will uncover the striker blocker under sights do sights work yes are they easier to pick up over factory yes will I keep them on weapon yes for now just wish
Great Sights(20.07.2014)
I have these installed on my SD40VE & my M&P 9mm Pro Series, and I really like them.
I think these sights really catch the eye and are easier to line up shots with compared to other sights. I love that you can change out the fiber optic rods to different colors. If you're looking for a set of fixed sights I strongly recommend these. I would have given 5 stars, but I think all sights are over priced, so I only gave 4. These are cheaper than other similar sights though.
Sieht gut aus, läßt sich schlecht installieren(10.02.2017)
Die Visierung sollte (gemeinsam mit einem Apex-Kit) auf eine M&P 9 Shield installiert werden. Aussehen und Verarbeitung sind sehr gut. Leider ist es mir nicht gelungen, sie beschädigungsfrei in die Schwalbenschwanz-Nuten zu bekommen. Die Passungen sind so eng, dass jede Menge Kraft benötigt wird. Das hält das Aluminium-Gehäuse leider nicht aus... Es bleibt nur, die Sockel sowohl der Kimme als auch des Korns nachzuarbeiten, das ist insbesondere unter dem Korn sehr mühsam und verbraucht Zeit, die niemand zu zahlen bereit ist. Bei €66 hätte ich mir erheblich bessere Passungen erwartet. Ich würde eher eine Stahl-Visierung empfehlen. Btw: Ich bin seit 29 Jahren ausgebildeter Waffentechniker.
Artikel-Nr.: 962000108 WILLIAMS GUN SIGHT S&W M&P Bodyguard 380 Fire Sight Set Herstellerproduktnummer: 70993053506709939 Direktersatz für Werksvisiere bei beliebten Handfeuerwaffen, die Umgebungslicht sammeln für eine hervorragende Sichtbarkeit. Je mehr Licht, desto heller leuchten die Stäbe. 3-Punkt-Visierbild; das Korn hat einen grünen Einsatz, das hintere Visier zwei orange Einsätze. Die Fire Sights für Waffen, die ursprünglich mit festen Visieren ausgestattet waren, sind ebenfalls fest. War die Waffe ursprünglich mit einem einstellbaren hinteren Visier ausgestattet, ist das Fire Sight verstellbar.
76.9EUR076,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften:Art: Fiber OpticFarbe der Visierung: Green/OrangeHersteller/Modell: Smith & WessonModell: Bodyguard
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has green insert, rear has two orange inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.
Mehr...
Direktersatz für Werksvisiere bei beliebten Handfeuerwaffen, die Umgebungslicht sammeln für eine hervorragende Sichtbarkeit. Je mehr Licht, desto heller leuchten die Stäbe. 3-Punkt-Visierbild; das Korn hat einen grünen Einsatz, das hintere Visier zwei orange Einsätze. Die Fire Sights für Waffen, die ursprünglich mit festen Visieren ausgestattet waren, sind ebenfalls fest. War die Waffe ursprünglich mit einem einstellbaren hinteren Visier ausgestattet, ist das Fire Sight verstellbar.
Mehr...
Kundenbewertungen zu WILLIAMS GUN SIGHT S&W M&P Bodyguard 380 Fire Sight Set
Anzahl der Bewertungen: 4
Von brownells.com: 3
Durchschnittliche Bewertung: 2,3
Cheap(04.08.2017)
I want to start off by saying I was using a sight pusher that is designed to install iron sights on M&P Shields when working with these sights. The front sight went on with ease. However, the rear sight was a complete 360 from from the front sight. It was going on with normal resistance (similar to the front sight). The normal resistance marred the rear sight (there was no marring to the front). Then I used a brass punch to punch it out, because sight pusher already damaged the rear. The brass punch damaged the other side of the sight. I believe they used some of the cheapest alluminum to make the rear sight (it shouldn't of marred that bad). I know this because I have worked with many sights before.
half n half(29.08.2013)
I really like these sights my complaints are the image shows red front green rear the sights I received were opposite red/orange rear green front is this a huge deal for me no but for some people it would be a huge issue as the warmer color is the one that will attract your eye for focal plane another complaint is the sides were impossible to drive in without damaging due to a angled downward toward pistol rear sight attempted using a dowel but sight split it due to sharp edge also sights are much more narrow if you center them no problem but if they need adjusted expecially away from ejection port they will uncover the striker blocker under sights do sights work yes are they easier to pick up over factory yes will I keep them on weapon yes for now just wish
Great Sights(20.07.2014)
I have these installed on my SD40VE & my M&P 9mm Pro Series, and I really like them.
I think these sights really catch the eye and are easier to line up shots with compared to other sights. I love that you can change out the fiber optic rods to different colors. If you're looking for a set of fixed sights I strongly recommend these. I would have given 5 stars, but I think all sights are over priced, so I only gave 4. These are cheaper than other similar sights though.
Sieht gut aus, läßt sich schlecht installieren(10.02.2017)
Die Visierung sollte (gemeinsam mit einem Apex-Kit) auf eine M&P 9 Shield installiert werden. Aussehen und Verarbeitung sind sehr gut. Leider ist es mir nicht gelungen, sie beschädigungsfrei in die Schwalbenschwanz-Nuten zu bekommen. Die Passungen sind so eng, dass jede Menge Kraft benötigt wird. Das hält das Aluminium-Gehäuse leider nicht aus... Es bleibt nur, die Sockel sowohl der Kimme als auch des Korns nachzuarbeiten, das ist insbesondere unter dem Korn sehr mühsam und verbraucht Zeit, die niemand zu zahlen bereit ist. Bei €66 hätte ich mir erheblich bessere Passungen erwartet. Ich würde eher eine Stahl-Visierung empfehlen. Btw: Ich bin seit 29 Jahren ausgebildeter Waffentechniker.