Ihr Warenkorb ist leer.

Warenkorb

DAYTON TRAISTER
SMALL RING MAUSER COCK-ON-OPEN KIT

240150096

Upgrades Action For Easier Operation

Fits 93-96 Mausers. Redesigned cocking piece and striker spring. Works with Dayton Traister, other commercial triggers or military trigger and safety.

SPECS: Steel, black, matte finish. Requires bolt modification.

Mehr...

Upgrades Aktion für eine einfachere Bedienung

Für 93-96 Mauser. Neu gestaltete Spann- und Schlagfeder. Funktioniert mit Dayton Traister, anderen kommerziellen oder militärischen Triggern und Sicherheitsfunktionen.

Technische Daten: Stahl, schwarz, mattes Finish. Erfordert eine Änderung der Schraube.

Mehr...

Kundenbewertungen zu DAYTON TRAISTER 93-96 Cock-On-Open Kit

Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,3

It does work (15.07.2010)

I've converted a number of M94 Swedish and M95 Chilean Mausers with this kit. While it surly is not as easy to install as the kit they make for the M14-M17 Enfield, with a little patience, a Dremel, and some thought, it can go in. Like all gunsmithing, think about how it should work when it goes in. Follow the instructions, but more than that, visulize the operation.

My one hiccup during several times installed (4-5)has been the opening of the bolt the first time it is ready to open on the upstroke of the bolt. The sear seems to gall on the bolt as it exerts unusual pressure to open. Once when converting a M94 I had such a hard time opening the bolt I bent the converted bolt handle with the opening pressure. Thereafter, it functioned smoothly and with little effort. Several other Mausers I converted did not do this. Keep in mind that this series Mauser actions keeps the bolt shroud and cocking piece in place only because the tip of the sear rests in a slight indent you create at the end of the bolt body, where it rests to resist turning accidently, unlike the M98 which has a mechanical interrupt on the bottom of the cocking piece to assure it does not turn on the bolt body until the bolt is going into battery, and a turn of the bolt handle down releases the cocking piece.

The M94-95 are lovely little actions, especially for 6 MM Rem, .257 Rbts, and 7X57 Mauser, all which feed without any conversion. If you read Terry Wieland's attempt to blow up a M94 Mauser, you'll discover these are in fact suitable for most cartridges except those with very high PSI.

Just a hobbyist am I. (02.09.2015)

I agree 100% with the previous review. I only did two of these so far and the first took me an hour to do. The second about 45 minutes. I found that the opening on the back of the bolt had to be cut a bit larger than the instructions recommended. Once I overcame the initial binding and tuff action by making this adjustment, everything became smooth and easy. A little lubricant helps also. At first I was attempting to fit the unit dry and it was a mistake. The largest issue I had was, being my firs attempt to do this, the instructions were not very clear. Once I was able to visualize what the instructions were attempting to convey, I was able to make the apocopate adjustments and everything fell into place, LITELARLY. I did my initial bolt carving on a Bridgeport with a 1/8" carbide cutter and did the final smoothing and fitting with a small air grinder and a cutoff wheel. I combined this unit with a 100-001-866 FN stile shroud and it makes a beautiful combination. I found that it works with any stile trigger. I also found that the spring works the best when the ground portion sits against the shroud and not against the striker. For me, with the spring in the reversed configuration, I found that it had a tendency to bind. I did not allow this experiment to scare me and I had a wonderful result. I am building a few rifles in the obscure 7.62 x 45 Czech cartridge for which the small ring Mauser is a perfect fit and this makes a beautiful rifle out of a military action. With the FN shroud it is a very nice finishing touch. This is a perfect combination for, plinking, hunting deer size game and smaller, target shooting and just all around fun with a rifle that no longer looks like it was a modified military piece.

Just did my second one. (15.01.2016)

The first one I did took me a bit of time to do because I did not know what I was doing. I just did my second one and It was so simple I can't understand what took me so long the first time. The whole job took me about 30 minutes. and it works great. The instructions are not precise and you get to learn the tricks on the first one you do and the second one is than simple. I now won't have enough projects to do for me to be able and do more of these. I now plan on converting EVERY small ring Mauser I have with this kit. I also love the fact that the cocking piece do not stick out so far back. Once again, I am not a gunsmith by any stretch of the imagination but only a hobbyist.

<img width="500" src='/userdocs/reviewimages/44933b93-213a-43a1-9f06-34d8e42a2932.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e1fbb210-d4b5-4792-b2d6-d0ef05e546a9.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/18d74644-e622-4446-8699-50f8dc409c61.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e2023704-cc25-4257-b5cb-4dac26e99959.jpg' alt=''>

Lesen Sie 3 weitere Bewertungen bei brownells.com

75.9 75.9 1 EUR

Artikel-Nr.: 240150096
DAYTON TRAISTER 93-96 Cock-On-Open Kit
Herstellerproduktnummer: DCPM Für 93-96 Mauser. Neu gestaltete Spann- und Schlagfeder. Funktioniert mit Dayton Traister, anderen kommerziellen oder militärischen Triggern und Sicherheitsfunktionen.

75.9 EUR 0 75,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften: Hersteller/Modell: Mauser Modell: 93, 96

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Hersteller/Modell: Mauser Modell: 93,96 Versandgewicht: 0,045kg Versandhöhe: 8mm Versandbreite: 61mm Versandlänge: 140mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x

Upgrades Action For Easier Operation

Fits 93-96 Mausers. Redesigned cocking piece and striker spring. Works with Dayton Traister, other commercial triggers or military trigger and safety.

SPECS: Steel, black, matte finish. Requires bolt modification.

Mehr...

Upgrades Aktion für eine einfachere Bedienung

Für 93-96 Mauser. Neu gestaltete Spann- und Schlagfeder. Funktioniert mit Dayton Traister, anderen kommerziellen oder militärischen Triggern und Sicherheitsfunktionen.

Technische Daten: Stahl, schwarz, mattes Finish. Erfordert eine Änderung der Schraube.

Mehr...

Kundenbewertungen zu DAYTON TRAISTER 93-96 Cock-On-Open Kit

Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,3

It does work (15.07.2010)

Just a hobbyist am I. (02.09.2015)

Just did my second one. (15.01.2016)

Lesen Sie 3 weitere Bewertungen bei brownells.com

Kunden kauften auch

DAYTON TRAISTER Mark II Trigger UM
DAYTON TRAISTER TRIGGER

DAYTON TRAISTER

Nachbestellt Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

74,90 € * 74,90 € - 75,90 €*

Abzüge

4,9

SAVAGE Bolt Head, Standard, Right Hand

SAVAGE

Nachbestellt Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

205,90 € *

Verschlüsse

SAVAGE Extractor

SAVAGE

Nachbestellt Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

12,70 € *

Auszieher

SAVAGE Extractor Detent Ball

SAVAGE

Nachbestellt Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

10,20 € *

Auszieherbeschläge

SAVAGE Extractor Spring

SAVAGE

Nachbestellt Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

10,20 € *

Auszieherfeder

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 10-13 und 14-16 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.