Adjustable Shafts With Interchangeable Bits To Fit & Reach Small Screws
Driver system has six, interchangeable steel shafts with 12 precision-ground bits for fast change from standard slot blade to Phillips or Torx® tip. Great for working on the many small parts and accessories found in most gun shops and hobbyist work benches. Collet lets you adjust the shaft length approximately 3" to get to those hard-to-reach places. Rotating cap minimizes friction to ease screw removal or installation, while the hanging hole in the handle can be used with a second shaft as a T-handle for extra leverage to remove stubborn screws. Handle has a soft, ergonomic, rubber outer-grip for comfort and excellent grip.
SPECS: Handle – Steel, polypropylene, and neoprene, gray and black. Shaft/Bits - Chrome-moly-vanadium steel, 4¾" (12cm) long. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0, and 1; Torx - T6, T7, T8, T9, T10, T15.
Mehr...
Verstellbare Schäfte mit austauschbaren Bits für kleine Schrauben
Das Schraubendrehersystem verfügt über sechs austauschbare Stahlschäfte mit 12 präzisionsgeschliffenen Bits für einen schnellen Wechsel von Standard-Schlitzklinge zu Phillips- oder Torx®-Spitze. Ideal für die Arbeit an den vielen kleinen Teilen und Zubehörteilen, die in den meisten Waffengeschäften und auf Hobbywerkbanken zu finden sind. Das Spannzangenfutter ermöglicht es dir, die Schaftlänge um etwa 3" zu verstellen, um an schwer erreichbare Stellen zu gelangen. Die drehbare Kappe reduziert die Reibung, um das Entfernen oder Einsetzen von Schrauben zu erleichtern, während das Aufhängeloch im Griff mit einem zweiten Schaft als T-Griff für zusätzliche Hebelkraft verwendet werden kann, um hartnäckige Schrauben zu entfernen. Der Griff verfügt über eine weiche, ergonomische Gummiaußenhülle für Komfort und hervorragenden Griff.
SPECS: Griff – Stahl, Polypropylen und Neopren, grau und schwarz. Schaft/Bits - Chrom-Molybdän-Vanadium-Stahl, 4¾" (12cm) lang. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0 und 1; Torx - T6, T7, T8, T9, T10, T15.
Mehr...
Kundenbewertungen zu BONDHUS Precision Screwdriver Kit
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 3
Delicate (13.05.2015)
The reason I gave this set a three star rating is because of the frailness of the driver tip when using the other bits as a "T" handle for extra torque, and when I did that for a stubborn slotted screw the tip broke. I like this set for it's size to work on small intricate parts and convenience of tips.
The set however is not made for heavy use such as doing what is suggested in the description of using the other bits for a "T" handle.
I will add that the manufacture stood behind there product and did offer to replace the tip that broke.
Artikel-Nr.: 123000018 BONDHUS Precision Screwdriver Kit Herstellerproduktnummer: 0715750727 Das Schraubendrehersystem verfügt über sechs austauschbare Stahlschäfte mit 12 präzisionsgeschliffenen Bits für einen schnellen Wechsel von Standard-Schlitzklinge zu Phillips- oder Torx®-Spitze. Ideal für die Arbeit an den vielen kleinen Teilen und Zubehörteilen, die in den meisten Waffengeschäften und auf Hobbywerkbanken zu finden sind. Das Spannzangenfutter ermöglicht es dir, die Schaftlänge um etwa 3" zu verstellen, um an schwer erreichbare Stellen zu gelangen. Die drehbare Kappe reduziert die Reibung, um das Entfernen oder Einsetzen von Schrauben zu erleichtern, während das Aufhängeloch im Griff mit einem zweiten Schaft als T-Griff für zusätzliche Hebelkraft verwendet werden kann, um hartnäckige Schrauben zu entfernen. Der Griff verfügt über eine weiche, ergonomische Gummiaußenhülle für Komfort und hervorragenden Griff.
Adjustable Shafts With Interchangeable Bits To Fit & Reach Small Screws
Driver system has six, interchangeable steel shafts with 12 precision-ground bits for fast change from standard slot blade to Phillips or Torx® tip. Great for working on the many small parts and accessories found in most gun shops and hobbyist work benches. Collet lets you adjust the shaft length approximately 3" to get to those hard-to-reach places. Rotating cap minimizes friction to ease screw removal or installation, while the hanging hole in the handle can be used with a second shaft as a T-handle for extra leverage to remove stubborn screws. Handle has a soft, ergonomic, rubber outer-grip for comfort and excellent grip.
SPECS: Handle – Steel, polypropylene, and neoprene, gray and black. Shaft/Bits - Chrome-moly-vanadium steel, 4¾" (12cm) long. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0, and 1; Torx - T6, T7, T8, T9, T10, T15.
Mehr...
Verstellbare Schäfte mit austauschbaren Bits für kleine Schrauben
Das Schraubendrehersystem verfügt über sechs austauschbare Stahlschäfte mit 12 präzisionsgeschliffenen Bits für einen schnellen Wechsel von Standard-Schlitzklinge zu Phillips- oder Torx®-Spitze. Ideal für die Arbeit an den vielen kleinen Teilen und Zubehörteilen, die in den meisten Waffengeschäften und auf Hobbywerkbanken zu finden sind. Das Spannzangenfutter ermöglicht es dir, die Schaftlänge um etwa 3" zu verstellen, um an schwer erreichbare Stellen zu gelangen. Die drehbare Kappe reduziert die Reibung, um das Entfernen oder Einsetzen von Schrauben zu erleichtern, während das Aufhängeloch im Griff mit einem zweiten Schaft als T-Griff für zusätzliche Hebelkraft verwendet werden kann, um hartnäckige Schrauben zu entfernen. Der Griff verfügt über eine weiche, ergonomische Gummiaußenhülle für Komfort und hervorragenden Griff.
SPECS: Griff – Stahl, Polypropylen und Neopren, grau und schwarz. Schaft/Bits - Chrom-Molybdän-Vanadium-Stahl, 4¾" (12cm) lang. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0 und 1; Torx - T6, T7, T8, T9, T10, T15.
Mehr...
Kundenbewertungen zu BONDHUS Precision Screwdriver Kit
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 3
Delicate (13.05.2015)
The reason I gave this set a three star rating is because of the frailness of the driver tip when using the other bits as a "T" handle for extra torque, and when I did that for a stubborn slotted screw the tip broke. I like this set for it's size to work on small intricate parts and convenience of tips.
The set however is not made for heavy use such as doing what is suggested in the description of using the other bits for a "T" handle.
I will add that the manufacture stood behind there product and did offer to replace the tip that broke.