OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
Die perfekte Optik-Plattform für deine Glock® MOS!
Die OPF-G, RMR (Optics Platform, Glock, für RMR) ist ein kompatibles Adapterset für die Glock MOS, das es dir ermöglicht, Trijicon RMR oder SRO auf Glock Gen 4 und Gen 5 Schlitzen (G17, G19, G34, G35, G41 und G40 mit Set 02) zu montieren. Die Breite beträgt 25 mm (1 Zoll).
Im Gegensatz zur OEM MOS-Platte von Glock, die die Breite des Schlittens hat, ist die OPF-G, RMR bereits breiter, um die RMR vollständig zu unterstützen, was sie mit allen MOS-ausgestatteten Glock-Schlitzen kompatibel macht. Wir schätzen das Glock MOS-Konzept, auch wenn wir der Meinung sind, dass die Werksadapterplatten Verbesserungen benötigen.
Vorteile der OPF-G, RMR
- Einheitliche Sichthöhe für eine bessere Zielerfassung.
- Einfache Installation ohne zusätzliche Dichtplatte.
- Korrekte Schraubenlängen für die Montage von Sicht zu Platte und Platte zu Schlitten.
- Torx-Schrauben für eine sichere Befestigung.
- Adapterplatte aus hochwertigem Stahl gefertigt.
Die OPF-G, RMR erfüllt alle oben genannten Ziele und verändert die Höhe der montierten Sicht nicht, noch sind unterschiedliche Kimme und Korn erforderlich. Sie wird mit Schrauben zur Montage von Platte zu Schlitten (M3-0.5mm x 6mm, dieselben wie bei Glock MOS-Platten) und Schrauben zur Montage von Sicht zu Platte (6/32 x 3/8), einem T10-Schlüssel und einem VC3-Paket geliefert.
Technische Daten
- Gewicht: 0.83 oz
- Drehmomentwert Platte zu Schlitten: 13 bis 15 in/lb
- Drehmomentwert Sicht zu Platte: 13 in/lb
Stolz entworfen und hergestellt in den USA.