The Marksman single stage reloading press from MEC reloading offers superior quality, and is incredibly durable, thanks to its ductile cast iron construction. The patent-pending self-centering shell holder provides a high level of accuracy and consistency with every reload. The Marksman single stage reloading press may well be the only machine you ever need because of the wide range of dies and calibers it accepts. Compatible with all 7/8-14 thread dies Reload from .22 Hornet to .416 Rigby Marksman single stage reloading presses and accessory products are in the USA at the Mayville, WI facility.
Mehr...
Premium-Presse mit Gusseisenkonstruktion
Die einstufige Wiederladepresse Marksman von MEC Reloading bietet überlegene Qualität und ist aufgrund ihrer Konstruktion aus duktilem Gusseisen unglaublich langlebig. Die patentrechtlich geschützte, selbstzentrierende Hülsenhalterung sorgt für ein hohes Maß an Genauigkeit und Konsistenz bei jedem Wiederladen. Die einstufige Wiederladepresse Marksman könnte aufgrund der breiten Palette an Matrizen und Kalibern, die sie akzeptiert, die einzige Maschine sein, die du jemals benötigen wirst. Kompatibel mit allen 7/8-14 Gewindematrizen Wiederladen von .22 Hornet bis .416 Rigby Die einstufigen Wiederladepressen Marksman und Zubehörprodukte werden in den USA, in der Einrichtung in Mayville, WI, hergestellt.
Mehr...
Kundenbewertungen zu MEC RELOADING Marksman Single Stage Press
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Great press for the price.(16.06.2017)
Had the chance to play with a buddy of mines press and thought it was great so I bought one for myself. The floating shellholder is great. I'm getting some really low runout on my finished ammo. I really like the open front design of this press. I can easily place and reach any cases with either hand without obstruction. Great leverage as well. My one complaint is about 1 out of every 20-30 deprimed primers jumps out of the tray and drops to the floor. I'd say its comparable to the CoAx; not quite as nice and high end, but at over $100 cheaper its still a great press.
good press(25.11.2017)
Press arrived in good condition and works great. one problem I had is my large rifle primers got caught in the chute right before they were supposed to fall in the spent primer pan. had to take it back off the bench and pull the chute opening a little bit and seems to be fine now.
Artikel-Nr.: 749017300 MEC RELOADING Marksman Single Stage Press Herstellerproduktnummer: 1311080098489039086 Die einstufige Wiederladepresse Marksman von MEC Reloading bietet überlegene Qualität und ist aufgrund ihrer Konstruktion aus duktilem Gusseisen unglaublich langlebig. Die patentrechtlich geschützte, selbstzentrierende Hülsenhalterung sorgt für ein hohes Maß an Genauigkeit und Konsistenz bei jedem Wiederladen. Die einstufige Wiederladepresse Marksman könnte aufgrund der breiten Palette an Matrizen und Kalibern, die sie akzeptiert, die einzige Maschine sein, die du jemals benötigen wirst. Kompatibel mit allen 7/8-14 Gewindematrizen Wiederladen von .22 Hornet bis .416 Rigby Die einstufigen Wiederladepressen Marksman und Zubehörprodukte werden in den USA, in der Einrichtung in Mayville, WI, hergestellt.
404.9EUR12404,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
The Marksman single stage reloading press from MEC reloading offers superior quality, and is incredibly durable, thanks to its ductile cast iron construction. The patent-pending self-centering shell holder provides a high level of accuracy and consistency with every reload. The Marksman single stage reloading press may well be the only machine you ever need because of the wide range of dies and calibers it accepts. Compatible with all 7/8-14 thread dies Reload from .22 Hornet to .416 Rigby Marksman single stage reloading presses and accessory products are in the USA at the Mayville, WI facility.
Mehr...
Premium-Presse mit Gusseisenkonstruktion
Die einstufige Wiederladepresse Marksman von MEC Reloading bietet überlegene Qualität und ist aufgrund ihrer Konstruktion aus duktilem Gusseisen unglaublich langlebig. Die patentrechtlich geschützte, selbstzentrierende Hülsenhalterung sorgt für ein hohes Maß an Genauigkeit und Konsistenz bei jedem Wiederladen. Die einstufige Wiederladepresse Marksman könnte aufgrund der breiten Palette an Matrizen und Kalibern, die sie akzeptiert, die einzige Maschine sein, die du jemals benötigen wirst. Kompatibel mit allen 7/8-14 Gewindematrizen Wiederladen von .22 Hornet bis .416 Rigby Die einstufigen Wiederladepressen Marksman und Zubehörprodukte werden in den USA, in der Einrichtung in Mayville, WI, hergestellt.
Mehr...
Kundenbewertungen zu MEC RELOADING Marksman Single Stage Press
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Great press for the price.(16.06.2017)
Had the chance to play with a buddy of mines press and thought it was great so I bought one for myself. The floating shellholder is great. I'm getting some really low runout on my finished ammo. I really like the open front design of this press. I can easily place and reach any cases with either hand without obstruction. Great leverage as well. My one complaint is about 1 out of every 20-30 deprimed primers jumps out of the tray and drops to the floor. I'd say its comparable to the CoAx; not quite as nice and high end, but at over $100 cheaper its still a great press.
good press(25.11.2017)
Press arrived in good condition and works great. one problem I had is my large rifle primers got caught in the chute right before they were supposed to fall in the spent primer pan. had to take it back off the bench and pull the chute opening a little bit and seems to be fine now.