Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Der KINETIC BULLET PULLER von QUINETICS entfernt schnell und beschädigungsfrei Geschosse und Hülsen, einfach zu bedienen und mit lebenslanger Garantie.

QUINETICS Kinetischer Geschossabzieher

899228001018 734001000

Eigenschaften

  • Kaliber:
    Universal
  • Versandgewicht: 0,181kg
  • Versandhöhe: 10mm
  • Versandbreite: 142mm
  • Versandlänge: 351mm
  • UPC: 899228001018

Artikeldetails

Made in USA
  • Spezifikationen:
  • Kaliber: Universal
29.9 29.9 1 EUR
29.9 EUR 29,90 €

Preise inkl. MwSt., zzgl. Versand

Artikel-Nr.: 734001000

Herst.-Nr.: BP100

899228001018 Der Hammer-Stil, "Ultimate" Modell entfernt Geschosse schnell, ohne das Geschoss oder die Hülse zu beschädigen. Geschoss, Pulver und Hülse können aus dem Abzieher entfernt werden, ohne den Deckel abzunehmen. Universell, .22 Zündhütchen bis .45 Kaliber (außer .25 ACP), der Drei-Jaw-Chuck verriegelt und löst die Hülse mit nur einer Vierteldrehung des Deckels. Einfach zu erkennen, wenn das Geschoss extrahiert wurde. Der Griff besteht aus einer Legierung mit geformtem Griff. Der Körper aus futuristischem Kunststoff hat eine lebenslange Garantie gegen Bruch. Einfach und bequem zu verwenden, egal ob du gelegentlich eine Nachladung überprüfst oder Hunderte von Geschossen abziehst.
Nicht verfügbar

Vom Hersteller aus dem Programm genommen

Es erfolgt keine Abbuchung vor dem Versand.
Keine Gebühren:
Deine Kreditkarte wird bei der Bestellung nicht belastet.

Keine Verpflichtungen:
Solange deine Bestellung noch nicht versendet wurde, kannst du sie jederzeit kostenlos stornieren.

Erst beim Versand:
Deine Kreditkarte wird erst belastet, wenn wir deine Bestellung versenden. Nicht vorher.
  • Schont Kugeln und Komponenten
  • Schnelle und einfache Anwendung
  • Lebenslange Garantie auf Bruch
29.9 29.9 1 EUR
Beschreibung Specification Kundenbewertungen Accessories

QUINETICS Kinetischer Geschossabzieher

29.9 EUR 29,90 €

Preise inkl. MwSt., zzgl. Versand

Beschreibung:

Original anzeigen (Englisch)

Der KINETIC BULLET PULLER von QUINETICS – schnell und zuverlässig!

Der Hammer-Stil, "Ultimate" Modell entfernt Geschosse schnell und ohne Beschädigung des Geschosses oder der Hülse. Mit diesem praktischen Werkzeug kannst du Geschoss, Pulver und Hülse einfach aus dem Puller entfernen, ohne den Deckel abnehmen zu müssen.

Eigenschaften:

  • Universell einsetzbar für .22 Centerfire bis .45 Kaliber (außer .25 ACP)
  • Drei-Klauenschraubstock, der die Hülse mit nur einer viertel Drehung des Deckels fixiert und freigibt
  • Leicht zu erkennen, wenn das Geschoss extrahiert wurde
  • Griff aus Legierung mit ergonomischem Design
  • Raumfahrtkunststoffkörper mit lebenslanger Garantie gegen Bruch

Der KINETIC BULLET PULLER ist einfach und bequem zu bedienen, egal ob du gelegentlich eine Nachladung überprüfst oder Hunderte von Geschossen abziehst.

Technische Daten:

  • Gesamtlänge: 11-5/8" (29.5 cm)


Eigenschaften

  • Kaliber:
    Universal
  • Versandgewicht: 0,181kg
  • Versandhöhe: 10mm
  • Versandbreite: 142mm
  • Versandlänge: 351mm
  • UPC: 899228001018

Artikeldetails

Made in USA

Kundenbewertungen

Kundenbewertungen (4)

4,3 / 5
Sehr empfehlenswert

Brownells USA Modify to save rifle bullets 09.01.2018

Force a piece of memory foam into the bottom if you want to save your bullet's tip form damage. Especially with rifle rounds that are pointy, because the angled part doesn't protect the tip of those rounds from smashing into the bottom. recovered my ELD-M rounds used to setup my 6.5CM dies. Obviously no powder was used during this bullet-pulling operation, memory foam would make that difficult to recover all the powder. Just my $0.02.

Empfehlenswert

Brownells USA ALMOST perfect 16.04.2017

I bought this after the previous puller I had broke during use--that was the second one where the striking end of the head broke open. I got this in the mail earlier this week and have pulled somewhere around 150 9mm, .45 ACP, and 5.56mm rounds.



This thing is much, MUCH better than the ones I've had in the past. One collet, that's it. No worrying about snapped O-rings or lost collet pieces or remembering which collet goes with each caliber.



One twist or a twist and a half opens the collet up to accept the round, twist it back tight in the other direction until it's snug. Whack the head against a hard surface until the bullet pulls. One or one-and-a-half twists to open, dump the components, then repeat. Much easier than pulling the collet or trying to get the brass out from the older versions.



It's almost perfect. I say "almost," because I'd make two changes. First, I find the handle to be just a bit too small in circumference. It's not that easy to grasp with a strong grip, which means you may not get as much force as you'd like to pull the bullet. And, sometimes, there's an unpleasant vibration in the handle because of the size.



The other thing I'd change is that the material that holds the collet pieces together just looks flimsy to me. It's a good thing I rarely have to open the end completely, because it looks to me like the collet is on the verge of coming apart--and it has since the day I got the product.



While the instructions are pretty thin, the product was pretty easy to figure out. The construction is similar to other products in this class, so we'll have to see how durable it is. I like it a lot and would definitely recommend this particular one over the other products in the same category to folks I know looking for this kind of device.

Schon gewusst?

Herstellerinformationen

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Deutschland GmbH
Lahnstr. 1
24539 Neumünster
Deutschland
info@brownells-deutschland.de

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben