Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

EGW
S&W M&P 22 COMPACT LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115884 296000676
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
76.9 76.9 1 EUR
Artikel-Nr.: 296000676
EGW SIGHT MOUNT FOR DELTAPOINT PRO FITS S&W M&P 22 COMPACT BLK
Herstellerproduktnummer: 49401 841370115884 EGW Red-Dot-Visiere sollen von links nach rechts installiert werden (wobei der Lauf nach vorne zeigt). Die Schwalbenschwanzführung hat eine progressive Verjüngung, um eine einfachere Installation zu ermöglichen. Entferne einfach das hintere Visier deiner Waffe und ersetze es durch die EGW Montage, um dein Leupold DeltaPoint Pro, JPoint, Redfield Accelerator oder Optima Red-Dot-Visier anzubringen. Du kannst die Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Visiermontage in der Schwalbenschwanzführung Ziehe die Feststellschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Visiermontage (das Einlegen eines kleinen Stücks Papier zwischen das Red-Dot-Visier und die Visiermontage wird das spätere Entfernen erleichtern und hält Loctite von dem Red-Dot-Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs fest Eine Veränderung deiner Feuerwaffe kann die Garantie des Herstellers erlöschen lassen. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Es wird keine Haftung für Schäden oder Verletzungen übernommen, die durch unsachgemäße Installation oder Verwendung dieses Produkts entstehen könnten.
76.9 EUR 0 76,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Smith & Wesson Material: Aluminum Modell: M&P 22

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Smith & Wesson Material: Aluminum Modell: M&P 22 Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm

Artikeldetails

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Newsletter