Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

W. FREAR INNOVATIONS
COLLIMATOR ELEVATOR

100002512
Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

0 0 1 EUR
Artikel-Nr.: 100002512
W. FREAR INNOVATIONS Collimator Elevator
Herstellerproduktnummer: COLLELEV Dieses präzisionsgefertigte Gerät erweitert deutlich die Verwendung und den Bereich deines optischen Kollimators für Gewehre mit großen Zielfernrohren oder Zielfernrohren, die in Ringen hoch über der Mittellinie der Bohrung montiert sind. Sehr einfach zu verwenden: Montiere deinen Kollimator auf den Elevation Arm, setze deinen Bohrungsspieß in den Elevator Block und fixiere ihn mit der Rändelschraube. Setze deinen Spieß in die Bohrung und bewege den Elevation Shaft nach oben oder unten. Justiere den Kollimator, sodass sein Rasterblick nahe der Mitte der Objektivlinse ist, und fixiere die Höhe des Kollimators mit der zweiten Rändelschraube.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.

Eigenschaften

Versandgewicht: 0,113kg Versandhöhe: 5mm Versandbreite: 58mm Versandlänge: 152mm

Artikeldetails

Made in USA




Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

Newsletter