Plenty Of Leverage To Remove & Reinstall Any Diameter Float Tube
Heavy-duty strap wrench gives you plenty of leverage to remove screw-on free-float handguard tubes, even those sealed with thread locker or frozen on by corrosion between the barrel nut and guard. Large, adjustable strap of tough, reinforced rubber wraps securely around any diameter handguard, with no risk of scratching the finish, and grasps the guard tighter as you apply pressure. Lets you position the strap right over the threaded end of the tube for maximum torque transfer where it s needed most. Hefty steel handle won t bend, no matter how much force you apply, and machined aluminum head maintains optimal alignment of handguard, strap, and handle. Indispensable time-saver for professional armorers or anybody who regularly faces the chore of changing handguards.
Jede Menge Hebelkraft zum Entfernen & Wiederanbringen von Float Tubes jeglichen Durchmessers
Dieser strapazierfähige Strap-Schlüssel bietet dir jede Menge Hebelkraft, um verschraubte Free-Float-Handschutzrohre zu entfernen, selbst solche, die mit Schraubensicherungsmittel festgeklebt oder durch Korrosion zwischen dem Laufgewinde und dem Handschutz festgesetzt sind. Das große, verstellbare Band aus robustem, verstärktem Gummi umschließt sicher jeden Durchmesser des Handschutzes, ohne die Oberfläche zu verkratzen, und greift umso fester zu, je mehr Druck ausgeübt wird. Damit kannst du das Band direkt über dem Gewindeende des Rohres positionieren, um die maximale Drehkraftübertragung genau dort zu ermöglichen, wo sie am meisten benötigt wird. Der kräftige Stahlgriff verbiegt sich nicht, egal wie viel Kraft du anwendest, und der gefräste Aluminiumkopf hält Handschutz, Band und Griff optimal ausgerichtet. Ein unverzichtbarer Zeitersparnis für professionelle Büchsenmacher oder jeden, der regelmäßig mit dem Wechsel von Handschutzen konfrontiert ist.
Kundenbewertungen zu ARRINGTON ACCURACY WORKS Free-Float Handguard Wrench
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 1
poor strap strength(28.10.2010)
the tool head and handle are a good idea but has too sharp edged that cut into the strap. strap broke twice, had to order another @ $15.00 from mfg, it broke also. would not recommend, find another brand.
waisted my money(27.05.2011)
first time i used it the strap broke, but it was long enough to repair, then broke again, had to round the inside edges where it was cutting into the strap, it broke, had to order another. it broke. good idea, bad design. Now its a [$] paperweight.
Bad product(18.02.2012)
was using this to install a free floating hogue tube on an AR15. The strap broke after only a moderate amount of pressure was applied, right at the juncture where the allen screw holds it into the frame of the wrench. Not enough slack in the strap and not enough length or girth on the actual wrench to get proper leverage.
Artikel-Nr.: 100004209 ARRINGTON ACCURACY WORKS Free-Float Handguard Wrench Dieser strapazierfähige Strap-Schlüssel bietet dir jede Menge Hebelkraft, um verschraubte Free-Float-Handschutzrohre zu entfernen, selbst solche, die mit Schraubensicherungsmittel festgeklebt oder durch Korrosion zwischen dem Laufgewinde und dem Handschutz festgesetzt sind. Das große, verstellbare Band aus robustem, verstärktem Gummi umschließt sicher jeden Durchmesser des Handschutzes, ohne die Oberfläche zu verkratzen, und greift umso fester zu, je mehr Druck ausgeübt wird. Damit kannst du das Band direkt über dem Gewindeende des Rohres positionieren, um die maximale Drehkraftübertragung genau dort zu ermöglichen, wo sie am meisten benötigt wird. Der kräftige Stahlgriff verbiegt sich nicht, egal wie viel Kraft du anwendest, und der gefräste Aluminiumkopf hält Handschutz, Band und Griff optimal ausgerichtet. Ein unverzichtbarer Zeitersparnis für professionelle Büchsenmacher oder jeden, der regelmäßig mit dem Wechsel von Handschutzen konfrontiert ist.
Plenty Of Leverage To Remove & Reinstall Any Diameter Float Tube
Heavy-duty strap wrench gives you plenty of leverage to remove screw-on free-float handguard tubes, even those sealed with thread locker or frozen on by corrosion between the barrel nut and guard. Large, adjustable strap of tough, reinforced rubber wraps securely around any diameter handguard, with no risk of scratching the finish, and grasps the guard tighter as you apply pressure. Lets you position the strap right over the threaded end of the tube for maximum torque transfer where it s needed most. Hefty steel handle won t bend, no matter how much force you apply, and machined aluminum head maintains optimal alignment of handguard, strap, and handle. Indispensable time-saver for professional armorers or anybody who regularly faces the chore of changing handguards.
Jede Menge Hebelkraft zum Entfernen & Wiederanbringen von Float Tubes jeglichen Durchmessers
Dieser strapazierfähige Strap-Schlüssel bietet dir jede Menge Hebelkraft, um verschraubte Free-Float-Handschutzrohre zu entfernen, selbst solche, die mit Schraubensicherungsmittel festgeklebt oder durch Korrosion zwischen dem Laufgewinde und dem Handschutz festgesetzt sind. Das große, verstellbare Band aus robustem, verstärktem Gummi umschließt sicher jeden Durchmesser des Handschutzes, ohne die Oberfläche zu verkratzen, und greift umso fester zu, je mehr Druck ausgeübt wird. Damit kannst du das Band direkt über dem Gewindeende des Rohres positionieren, um die maximale Drehkraftübertragung genau dort zu ermöglichen, wo sie am meisten benötigt wird. Der kräftige Stahlgriff verbiegt sich nicht, egal wie viel Kraft du anwendest, und der gefräste Aluminiumkopf hält Handschutz, Band und Griff optimal ausgerichtet. Ein unverzichtbarer Zeitersparnis für professionelle Büchsenmacher oder jeden, der regelmäßig mit dem Wechsel von Handschutzen konfrontiert ist.
Kundenbewertungen zu ARRINGTON ACCURACY WORKS Free-Float Handguard Wrench
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 1
poor strap strength(28.10.2010)
the tool head and handle are a good idea but has too sharp edged that cut into the strap. strap broke twice, had to order another @ $15.00 from mfg, it broke also. would not recommend, find another brand.
waisted my money(27.05.2011)
first time i used it the strap broke, but it was long enough to repair, then broke again, had to round the inside edges where it was cutting into the strap, it broke, had to order another. it broke. good idea, bad design. Now its a [$] paperweight.
Bad product(18.02.2012)
was using this to install a free floating hogue tube on an AR15. The strap broke after only a moderate amount of pressure was applied, right at the juncture where the allen screw holds it into the frame of the wrench. Not enough slack in the strap and not enough length or girth on the actual wrench to get proper leverage.