Ihr Warenkorb ist leer.

Warenkorb

10-8 PERFORMANCE
LLC 1911 NATIONAL MATCH U-NOTCH REAR SIGHT

100004375

Rugged Construction for Daily Carry, Plus A Clear, Easy-To-See Sight Picture

National Match style rear sight combines modern features with “retro” looks. Fits the dovetail of GI-pattern 1911 pistols, including current-production Colts—no milling required. Extra-thick blade is tall enough to work with Colt .175" high front sight or same-height aftermarket alternatives. Wide .140" notch aids in easy, fast acquisition of front sight for precise targeting. Ledge on front of blade aids in one-hand slide racking.

SPECS: Steel, matte black finish. .315” high, with .140” wide x .125” high notch. Fits dovetail for GI-pattern 1911 pistols, including current-production Colts with .175” high front sight.

Mehr...

Robuste Konstruktion für den täglichen Gebrauch, plus ein klares, leicht zu erkennendes Visierbild

Das National Match Style Visier für die hintere Sicht kombiniert moderne Features mit einem ‘retro’ Aussehen. Es passt in die Schwanzschraube von GI-Muster 1911 Pistolen, einschließlich der aktuellen Produktion von Colts—kein Fräsen erforderlich. Das extra-dicke Korn ist hoch genug, um mit Colts .175" hohen Frontvisier oder gleichhohen Aftermarket-Alternativen zu arbeiten. Die breite .140" Kerbe erleichtert die schnelle und einfache Erfassung des Frontvisiers für präzises Zielen. Die Leiste an der Vorderseite des Korns unterstützt das Durchladen der Schlitten mit einer Hand.

SPECS: Stahl, matt-schwarzes Finish. .315” hoch, mit .140” breiter x .125” hoher Kerbe. Passt in die Schwanzschnabelverbindung für GI-Muster 1911 Pistolen, einschließlich der aktuellen Produktion von Colts mit .175” hohem Korn.

Mehr...

Kundenbewertungen zu 10-8 PERFORMANCE LLC NM U-Notch Rear Sight

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4,8

Sometimes simple is best (02.11.2009)

I put this sight on my colt commander, which is my off duty conceal 1911. I carry a Wilson CQB on duty with their "U notch" sight, so it was sweet to find this one (keeping a sight standard). The sight fit a little tight and needed some minor fitting (a nail file worked well) to fit the slide after the pistol was Duracoated. The anti -glare lines cut into the sight work just as intended. The sight mates up to the series 80 front sight or any comparable in height VERY well. It's very thick, so adding a tactical advantage if you had to rack the gun on a boot, table, duty belt, ext. When building a carry 1911, one which has to do its job, looks are not the best reason to chose a sight set, but on a side note, this sight does add a very nice "retro" appearance to the weapon.

Very pleased (24.03.2010)

Couldn't be happier. Fit with minimal filing. Great sight picture. Doesn't look out of place on a Mil-Spec gun.

this is the one (14.01.2011)

I own several 1911's, some came with slanted rear sights ... they look nice ... but I never understood their usefulness.

I bought this simply to raise my POI on an older Colt. It did that. But once I installed it, it was clear this sight was built for serious business.

The sight is perfect, as is, for defensive, or even action-oriented competition. But I'd like to also see a more bullseye-oriented sight, with a narrower notch, and flat bottom.

This sight was also a perfect fit in both my older Colt, and recent manufacture Colt. Nice and tight ... but not enough to bring out the 5 lbs sledge.

Worked well (04.03.2011)

Installed on series 80. Needed some flat filing but fits fine. Did find some rust that I touched up with cold blue.

An excellent product (01.04.2011)

Using this product on a 1911 Springfield LW Champion Commander-style.

Using it for my off-duty gun, the sight works really well.

The U-Notch allows for great visibility of the front sight.

Remington 1911 R1 Install (24.03.2015)

I bought this to install on a Remington 1911 R1 standard blue model, with standard GI-style dovetail rear sight (NOT the Carry or Enhanced model), as I did not care for the stock rear sight's square edges for carry, or the huge rear white dots for shooting. This replacement sight took quite a bit of filing to fit the Remington dovetail to even a very snug fit - if you are not knowledgeable, skilled nor have the correct files for the job, it's a gunsmith install on this firearm.

Having said that, I am a 1911 armorer and it took me about 45 minutes to fit the sight, and touch-up cold blue it. Fortunately the sight takes Brownells Oxpho-Blue Creme very well. The resulting sight picture with the stock front sight is very nice - no distracting huge white dots. The serrated rear face creates a no-glare presentation, and the rounded corners are nice for concealed carry of the 1911.

At the range, POI after drift windage adjustment was zero at 15 yards with a center hold, using 230 grain factory ammo.

All in all, a nice replacement for the Remington 1911 R1, but not a drop in.

Outstanding Value (08.02.2016)

Took all of 15 minutes to fit this to a Model 1927 Argentine 1911. A few passes with a stone and it tapped nicely into place. Nice quality of finish. Serrations very crisp and even. Classic looks. I wold recommend this to anyone.

Fits Colt 1991A1 (07.03.2018)

Colt 1991A1. Two layers masking tape on each side of slide. One paint stick each side of slide protects from vice jaw marks. Slide dovetail just above jaws of vice. Tighten vice firmly, but not crush it. Removed old sight driven from right to left, viewed from back of slide. Very slightly rounded right side edges of new sight to help it start into LEFT side of slide dovetail. Took a few times to align and start sight into dovetail, but then drove in smoothly with brass punch. Some firm hits at the end to center sight in slide. The dovetail had a punch mark put in by Colt, I left the mark there and drove the new sight over it. Color matches Colt. Looks good, have not shot it yet.

Lesen Sie 8 weitere Bewertungen bei brownells.com

54.9 54.9 1 EUR

Artikel-Nr.: 100004375
10-8 PERFORMANCE LLC NM U-Notch Rear Sight
Herstellerproduktnummer: 01140 Das National Match Style Visier für die hintere Sicht kombiniert moderne Features mit einem ‘retro’ Aussehen. Es passt in die Schwanzschraube von GI-Muster 1911 Pistolen, einschließlich der aktuellen Produktion von Colts—kein Fräsen erforderlich. Das extra-dicke Korn ist hoch genug, um mit Colts .175" hohen Frontvisier oder gleichhohen Aftermarket-Alternativen zu arbeiten. Die breite .140" Kerbe erleichtert die schnelle und einfache Erfassung des Frontvisiers für präzises Zielen. Die Leiste an der Vorderseite des Korns unterstützt das Durchladen der Schlitten mit einer Hand.

54.9 EUR 6 54,90 € *

Lieferzeit ca. 14-21 Tage.
6 Stk. im Großlager

Eigenschaften: Art: U-Notch Farbe der Visierung: Black Hersteller/Modell: 1911 Modell: Government, Commander, Officers

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: U-Notch Farbe der Visierung: Black Hersteller/Modell: 1911 Modell: Commander,Government,Officers Versandgewicht: 0,005kg Versandbreite: 83mm Versandlänge: 146mm

Artikeldetails

Made in USA

Rugged Construction for Daily Carry, Plus A Clear, Easy-To-See Sight Picture

SPECS: Steel, matte black finish. .315” high, with .140” wide x .125” high notch. Fits dovetail for GI-pattern 1911 pistols, including current-production Colts with .175” high front sight.

Mehr...

Robuste Konstruktion für den täglichen Gebrauch, plus ein klares, leicht zu erkennendes Visierbild

Mehr...

Kundenbewertungen zu 10-8 PERFORMANCE LLC NM U-Notch Rear Sight

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4,8

Sometimes simple is best (02.11.2009)

Very pleased (24.03.2010)

Couldn't be happier. Fit with minimal filing. Great sight picture. Doesn't look out of place on a Mil-Spec gun.

this is the one (14.01.2011)

Worked well (04.03.2011)

Installed on series 80. Needed some flat filing but fits fine. Did find some rust that I touched up with cold blue.

An excellent product (01.04.2011)

Using this product on a 1911 Springfield LW Champion Commander-style.

Using it for my off-duty gun, the sight works really well.

The U-Notch allows for great visibility of the front sight.

Remington 1911 R1 Install (24.03.2015)

Outstanding Value (08.02.2016)

Fits Colt 1991A1 (07.03.2018)

Lesen Sie 8 weitere Bewertungen bei brownells.com

Kunden kauften auch
Alternativen

ISMI 19 lb. S/S Spring, each
ISMI 1911 MAINSPRING

ISMI

Auf Lager

13,50 € * 13,50 € - 40,90 €*

Hahnfedern

WILSON COMBAT Shok-Buffs® pak
WILSON COMBAT 1911 SHOK-BUFFS®

WILSON COMBAT

Auf Lager

17,90 € *

Rückstoßdämpfer

3,9

WILSON COMBAT Ringed Recoil Spring Plug
WILSON COMBAT 1911 BULLET-PROOF™ RECOIL SPRING PLUG

WILSON COMBAT

Auf Lager

29,90 € * 28,90 € - 29,90 €*

Schließfederhülsen

4,3

T K CUSTOM Model 625/25-2x6, .040" Thick
T K CUSTOM S&W REVOLVER FULL MOONCLIPS

T K CUSTOM

Bestellbar, nicht vorrätig

34,90 € *

Moonclips

MAGPUL 1911 MOE TSP Griff, schwarz
MAGPUL 1911 MOE TSP Griff

MAGPUL

Auf Lager

28,90 € *

Griffe

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.